Message-ID: <48a6b72d-d554-b563-5ed6-9a79db5fb4ab@gmx.net>
Date:   Fri, 13 Sep 2019 10:50:32 +0200
From:   Stefan Wahren <wahrenst@....net>
To:     Matthias Brugger <mbrugger@...e.com>, catalin.marinas@....com,
        marc.zyngier@....com, Matthias Brugger <matthias.bgg@...il.com>,
        robh+dt@...nel.org, linux-mm@...ck.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-riscv@...ts.infradead.org, hch@....de,
        Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
Cc:     robin.murphy@....com, f.fainelli@...il.com, will@...nel.org,
        linux-rpi-kernel@...ts.infradead.org, phill@...pberrypi.org,
        m.szyprowski@...sung.com, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v5 0/4] Raspberry Pi 4 DMA addressing support

Am 13.09.19 um 10:09 schrieb Matthias Brugger:
>
> On 12/09/2019 21:32, Stefan Wahren wrote:
>> Am 12.09.19 um 19:18 schrieb Matthias Brugger:
>>> On 10/09/2019 11:27, Matthias Brugger wrote:
>>>> On 09/09/2019 21:33, Stefan Wahren wrote:
>>>>> Hi Nicolas,
>>>>>
>>>>> Am 09.09.19 um 11:58 schrieb Nicolas Saenz Julienne:
>>>>>> Hi all,
>>>>>> this series attempts to address some issues we found while bringing up
>>>>>> the new Raspberry Pi 4 in arm64 and it's intended to serve as a follow
>>>>>> up of these discussions:
>>>>>> v4: https://lkml.org/lkml/2019/9/6/352
>>>>>> v3: https://lkml.org/lkml/2019/9/2/589
>>>>>> v2: https://lkml.org/lkml/2019/8/20/767
>>>>>> v1: https://lkml.org/lkml/2019/7/31/922
>>>>>> RFC: https://lkml.org/lkml/2019/7/17/476
>>>>>>
>>>>>> The new Raspberry Pi 4 has up to 4GB of memory but most peripherals can
>>>>>> only address the first GB: their DMA address range is
>>>>>> 0xc0000000-0xfc000000 which is aliased to the first GB of physical
>>>>>> memory 0x00000000-0x3c000000. Note that only some peripherals have these
>>>>>> limitations: the PCIe, V3D, GENET, and 40-bit DMA channels have a wider
>>>>>> view of the address space by virtue of being hooked up trough a second
>>>>>> interconnect.
>>>>>>
>>>>>> Part of this is solved on arm32 by setting up the machine specific
>>>>>> '.dma_zone_size = SZ_1G', which takes care of reserving the coherent
>>>>>> memory area at the right spot. That said no buffer bouncing (needed for
>>>>>> dma streaming) is available at the moment, but that's a story for
>>>>>> another series.
>>>>>>
>>>>>> Unfortunately there is no such thing as 'dma_zone_size' in arm64. Only
>>>>>> ZONE_DMA32 is created which is interpreted by dma-direct and the arm64
>>>>>> arch code as if all peripherals where be able to address the first 4GB
>>>>>> of memory.
>>>>>>
>>>>>> In the light of this, the series implements the following changes:
>>>>>>
>>>>>> - Create both DMA zones in arm64, ZONE_DMA will contain the first 1G
>>>>>>   area and ZONE_DMA32 the rest of the 32 bit addressable memory. So far
>>>>>>   the RPi4 is the only arm64 device with such DMA addressing limitations
>>>>>>   so this hardcoded solution was deemed preferable.
>>>>>>
>>>>>> - Properly set ARCH_ZONE_DMA_BITS.
>>>>>>
>>>>>> - Reserve the CMA area in a place suitable for all peripherals.
>>>>>>
>>>>>> This series has been tested on multiple devices both by checking the
>>>>>> zones setup matches the expectations and by double-checking physical
>>>>>> addresses on pages allocated on the three relevant areas GFP_DMA,
>>>>>> GFP_DMA32, GFP_KERNEL:
>>>>>>
>>>>>> - On an RPi4 with variations on the ram memory size. But also forcing
>>>>>>   the situation where all three memory zones are nonempty by setting a 3G
>>>>>>   ZONE_DMA32 ceiling on a 4G setup. Both with and without NUMA support.
>>>>>>
>>>>> i like to test this series on Raspberry Pi 4 and i have some questions
>>>>> to get arm64 running:
>>>>>
>>>>> Do you use U-Boot? Which tree?
>>>> If you want to use U-Boot, try v2019.10-rc4, it should have everything you need
>>>> to boot your kernel.
>>>>
>>> Ok, here is a thing. In the linux kernel we now use bcm2711 as SoC name, but the
>>> RPi4 devicetree provided by the FW uses mostly bcm2838.
>> Do you mean the DTB provided at runtime?
>>
>> You mean the merged U-Boot changes, doesn't work with my Raspberry Pi
>> series?
>>
>>>  U-Boot in its default
>>> config uses the devicetree provided by the FW, mostly because this way you don't
>>> have to do anything to find out how many RAM you really have. Secondly because
>>> this will allow us, in the near future, to have one U-boot binary for both RPi3
>>> and RPi4 (and as a side effect one binary for RPi1 and RPi2).
>>>
>>> Anyway, I found at least, that the following compatibles need to be added:
>>>
>>> "brcm,bcm2838-cprman"
>>> "brcm,bcm2838-gpio"
>>>
>>> Without at least the cprman driver update, you won't see anything.
>>>
>>> "brcm,bcm2838-rng200" is also a candidate.
>>>
>>> I also suppose we will need to add "brcm,bcm2838" to
>>> arch/arm/mach-bcm/bcm2711.c, but I haven't verified this.
>> How about changing this in the downstream kernel? Which is much easier.
> I'm not sure I understand what you want to say. My goal is to use the upstream
> kernel with the device tree blob provided by the FW.

The device tree blob you are talking is defined in this repository:

https://github.com/raspberrypi/linux

So the word FW is misleading to me.

>  If you talk about the
> downstream kernel, I suppose you mean we should change this in the FW DT blob
> and in the downstream kernel. That would work for me.
>
> Did I understand you correctly?

Yes

So i suggest to add the upstream compatibles into the repo mentioned above.

Sorry, but in case you decided as a U-Boot developer to be compatible
with a unreviewed DT, we also need to make U-Boot compatible with
upstream and downstream DT blobs.

>
>>> Regards,
>>> Matthias
>>>
>>>> Regards,
>>>> Matthias
>>>>
>>>>> Are there any config.txt tweaks necessary?
>>>>>
>>>>>
>>>> _______________________________________________
>>>> linux-arm-kernel mailing list
>>>> linux-arm-kernel@...ts.infradead.org
>>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>>>
>>> _______________________________________________
>>> linux-arm-kernel mailing list
>>> linux-arm-kernel@...ts.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>

Powered by blists - more mailing lists