[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <f12945994b66c5e605c0a121e7ad0526@protonic.nl>
Date: Fri, 13 Sep 2019 09:39:26 +0200
From: robin <robin@...tonic.nl>
To: Marco Felsch <m.felsch@...gutronix.de>
Cc: "linux-input @ vger . kernel . org" <linux-input@...r.kernel.org>,
"linux-kernel @ vger . kernel . org" <linux-kernel@...r.kernel.org>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
RobinGong <yibin.gong@....com>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>,
Adam Ford <aford173@...il.com>,
"linux-arm-kernel @ lists . infradead . org"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v3] input: keyboard: snvs_pwrkey: Send key events for
i.MX6 S, DL and Q
On 2019-09-04 08:52, Marco Felsch wrote:
> Hi Robin,
>
> thanks for the patch it looks quite good, just two minor nitpicks.
>
> On 19-09-04 06:23, Robin van der Gracht wrote:
>> The first generation i.MX6 processors does not send an interrupt when
>> the
>> power key is pressed. It sends a power down request interrupt if the
>> key is
>> released before a hard shutdown (5 second press). This should allow
>> software to bring down the SoC safely.
>>
>> For this driver to work as a regular power key with the older SoCs, we
>> need
>> to send a keypress AND release when we get the power down request irq.
>>
>> Signed-off-by: Robin van der Gracht <robin@...tonic.nl>
>> ---
>>
>> Changes v2 -> v3:
>> - Drop alt compatible string for identifying first revision snvs
>> hardware,
>> read minor revision from register instead.
>> - Drop imx6qdl.dtsi modification and device-tree binding
>> documentation.
>> - Add an additional input_sync() to create 2 seperate input reports
>> for press
>> and release.
>>
>> drivers/input/keyboard/Kconfig | 2 +-
>> drivers/input/keyboard/snvs_pwrkey.c | 28
>> ++++++++++++++++++++++++++--
>> 2 files changed, 27 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/input/keyboard/Kconfig
>> b/drivers/input/keyboard/Kconfig
>> index 7c4f19dab34f..937e58da5ce1 100644
>> --- a/drivers/input/keyboard/Kconfig
>> +++ b/drivers/input/keyboard/Kconfig
>> @@ -436,7 +436,7 @@ config KEYBOARD_SNVS_PWRKEY
>> depends on OF
>> help
>> This is the snvs powerkey driver for the Freescale i.MX
>> application
>> - processors that are newer than i.MX6 SX.
>> + processors.
>>
>> To compile this driver as a module, choose M here; the
>> module will be called snvs_pwrkey.
>> diff --git a/drivers/input/keyboard/snvs_pwrkey.c
>> b/drivers/input/keyboard/snvs_pwrkey.c
>> index 5342d8d45f81..828580eee0d2 100644
>> --- a/drivers/input/keyboard/snvs_pwrkey.c
>> +++ b/drivers/input/keyboard/snvs_pwrkey.c
>> @@ -19,6 +19,7 @@
>> #include <linux/mfd/syscon.h>
>> #include <linux/regmap.h>
>>
>> +#define SNVS_HPVIDR1_REG 0xF8
>> #define SNVS_LPSR_REG 0x4C /* LP Status Register */
>> #define SNVS_LPCR_REG 0x38 /* LP Control Register */
>> #define SNVS_HPSR_REG 0x14
>> @@ -37,6 +38,7 @@ struct pwrkey_drv_data {
>> int wakeup;
>> struct timer_list check_timer;
>> struct input_dev *input;
>> + u8 minor_rev;
>> };
>>
>> static void imx_imx_snvs_check_for_events(struct timer_list *t)
>> @@ -45,6 +47,20 @@ static void imx_imx_snvs_check_for_events(struct
>> timer_list *t)
>> struct input_dev *input = pdata->input;
>> u32 state;
>>
>> + if (pdata->minor_rev == 0) {
>
> Should we use a define here and ..
>
>> + /*
>> + * The first generation i.MX6 SoCs only sends an interrupt on
>> + * button release. To mimic power-key usage, we'll prepend a
>> + * press event.
>> + */
>> + input_report_key(input, pdata->keycode, 1);
>> + input_sync(input);
>> + input_report_key(input, pdata->keycode, 0);
>> + input_sync(input);
>> + pm_relax(input->dev.parent);
>> + return;
>> + }
>> +
>> regmap_read(pdata->snvs, SNVS_HPSR_REG, &state);
>> state = state & SNVS_HPSR_BTN ? 1 : 0;
>>
>> @@ -67,13 +83,17 @@ static irqreturn_t imx_snvs_pwrkey_interrupt(int
>> irq, void *dev_id)
>> {
>> struct platform_device *pdev = dev_id;
>> struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev);
>> + unsigned long expire = jiffies;
>> u32 lp_status;
>>
>> pm_wakeup_event(pdata->input->dev.parent, 0);
>>
>> regmap_read(pdata->snvs, SNVS_LPSR_REG, &lp_status);
>> - if (lp_status & SNVS_LPSR_SPO)
>> - mod_timer(&pdata->check_timer, jiffies +
>> msecs_to_jiffies(DEBOUNCE_TIME));
>> + if (lp_status & SNVS_LPSR_SPO) {
>> + if (pdata->minor_rev > 0)
>
> here? Just a nitpick, feel free to add/drop it.
Like a Macro?
#define FIRST_HW_REV(pdata) (pdata->minor_rev == 0)
if (FIRST_HW_REV(pdata) {
...
}
or just a define to identify the minor rev used for the first hw
revision
#define FIRST_HW_MINOR_REV 0
if (pdata->minor_rev == FIRST_HW_MINOR_REV) {
...
}
Regards,
Robin van der Gracht
Powered by blists - more mailing lists