[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAGvk5Ppg-dnfO-hHWps+MeWEYhqZmehEUXNn3MvL5VJwKmM5JQ@mail.gmail.com>
Date: Sat, 14 Sep 2019 16:34:04 +0800
From: Yu-Hsuan Hsu <yuhsuan@...omium.org>
To: Pierre-Louis Bossart <pierre-louis.bossart@...ux.intel.com>
Cc: linux-kernel@...r.kernel.org,
Cezary Rojewski <cezary.rojewski@...el.com>,
Liam Girdwood <liam.r.girdwood@...ux.intel.com>,
Jie Yang <yang.jie@...ux.intel.com>,
Mark Brown <broonie@...nel.org>,
Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>,
Kuninori Morimoto <kuninori.morimoto.gx@...esas.com>,
Tzung-Bi Shih <tzungbi@...gle.com>,
Thomas Gleixner <tglx@...utronix.de>,
alsa-devel@...a-project.org
Subject: Re: [alsa-devel] [PATCH] ASoC: Intel: kbl_rt5663_rt5514_max98927: Add
dmic format constraint
Pierre-Louis Bossart <pierre-louis.bossart@...ux.intel.com> 於
2019年9月14日 週六 上午1:28寫道:
>
> please don't top-post on public mailing lists, thanks.
>
> On 9/13/19 9:45 AM, Yu-Hsuan Hsu wrote:
> > Thanks for the review! If I'm not mistaken, the microphone is attached
> > to external codec(rt5514) instead of PCH on Kabylake platform. So there
> > should be a TDM between DMICs and PCH. We can see in the
> > kabylake_ssp0_hw_params function, there are some operations about
> > setting tdm slot_width to 16 bits. Therefore, I think it only supports
> > S16_LE format for DMICs. Is it correct?
>
> Ah yes, ok. we have other machine drivers where dmic refers to the PCH
> attached case, thanks for the precision.
>
> I am still not clear on the problem, you are adding this constraint to a
> front-end, so in theory the copier element in the firmware should take
> care of converting from 16-bits recorded on the TDM link to the 24 bits
> used by the application. Is this not the case? is this patch based on an
> actual error and if yes can you share more information to help check
> where the problem happens, topology maybe?
If we use 24 bits format on that device to record, the audio samples
it returns are still in 16 bits. So the rate we measured is only the
half of the expected rate. It's a real problem. Apart from the rate,
the audio samples are also wrong if we still decode them with 24 bits
format. Therefore, the better fix is to add a constraint to remove
24bits support.
By the way, we found this issue by "ALSA conformance test", which is a
new tool to verify audio drivers.
(https://chromium.googlesource.com/chromiumos/platform/audiotest/+/master/alsa_conformance_test.md)
>
> >
> > Pierre-Louis Bossart <pierre-louis.bossart@...ux.intel.com
> > <mailto:pierre-louis.bossart@...ux.intel.com>> 於 2019年9月12日 週四 下
> > 午9:02寫道:
> >
> > On 9/11/19 9:27 PM, Yu-Hsuan Hsu wrote:
> > > 24 bits recording from DMIC is not supported for KBL platform because
> > > the TDM slot between PCH and codec is 16 bits only. We should add a
> > > constraint to remove that unsupported format.
> >
> > Humm, when you use DMICs they are directly connected to the PCH with a
> > standard 1-bit PDM. There is no notion of TDM or slot.
> >
> > It could very well be that the firmware/topology only support 16 bit (I
> > vaguely recall another case where 24 bits was added), but the
> > description in the commit message would need to be modified to make the
> > reason for this change clearer.
> >
> > >
> > > Signed-off-by: Yu-Hsuan Hsu <yuhsuan@...omium.org
> > <mailto:yuhsuan@...omium.org>>
> > > ---
> > > sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c | 3 +++
> > > 1 file changed, 3 insertions(+)
> > >
> > > diff --git a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
> > b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
> > > index 74dda8784f1a01..67b276a65a8d2d 100644
> > > --- a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
> > > +++ b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
> > > @@ -400,6 +400,9 @@ static int kabylake_dmic_startup(struct
> > snd_pcm_substream *substream)
> > > snd_pcm_hw_constraint_list(runtime, 0,
> > SNDRV_PCM_HW_PARAM_CHANNELS,
> > > dmic_constraints);
> > >
> > > + runtime->hw.formats = SNDRV_PCM_FMTBIT_S16_LE;
> > > + snd_pcm_hw_constraint_msbits(runtime, 0, 16, 16);
> > > +
> > > return snd_pcm_hw_constraint_list(substream->runtime, 0,
> > > SNDRV_PCM_HW_PARAM_RATE, &constraints_rates);
> > > }
> > >
> >
>
Powered by blists - more mailing lists