| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <DB7PR04MB5195E253B39B539B2AC60BEAE28C0@DB7PR04MB5195.eurprd04.prod.outlook.com>
Date: Mon, 16 Sep 2019 02:12:50 +0000
From: Wen He <wen.he_1@....com>
To: Liviu Dudau <liviu.dudau@....com>
CC: "linux-devel@...ux.nxdi.nxp.com" <linux-devel@...ux.nxdi.nxp.com>,
Brian Starkey <brian.starkey@....com>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
"dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Leo Li <leoyang.li@....com>
Subject: RE: [EXT] Re: [v5 2/2] drm/arm/mali-dp: Add display QoS interface
configuration for Mali DP500
> -----Original Message-----
> From: Liviu Dudau <liviu.dudau@....com>
> Sent: 2019年9月12日 22:47
> To: Wen He <wen.he_1@....com>
> Cc: linux-devel@...ux.nxdi.nxp.com; Brian Starkey <brian.starkey@....com>;
> David Airlie <airlied@...ux.ie>; Daniel Vetter <daniel@...ll.ch>; Rob Herring
> <robh+dt@...nel.org>; Mark Rutland <mark.rutland@....com>;
> dri-devel@...ts.freedesktop.org; devicetree@...r.kernel.org;
> linux-kernel@...r.kernel.org; Leo Li <leoyang.li@....com>
> Subject: [EXT] Re: [v5 2/2] drm/arm/mali-dp: Add display QoS interface
> configuration for Mali DP500
>
> Caution: EXT Email
>
> On Tue, Sep 10, 2019 at 03:59:13PM +0800, Wen He wrote:
> > Configure the display Quality of service (QoS) levels priority if the
> > optional property node "arm,malidp-aqros-value" is defined in DTS file.
> >
> > QoS signaling using AQROS and AWQOS AXI interface signals, the AQROS
> > is driven from the "RQOS" register, so needed to program the RQOS
> > register to avoid the high resolutions flicker issue on the LS1028A platform.
> >
> > Signed-off-by: Wen He <wen.he_1@....com>
>
> Acked-by: Liviu Dudau <liviu.dudau@....com>
>
> Thanks for the patch! I will pull this into the malidp code and push it to
> drm-misc-next in the following days.
Thank you, Liviu.
Best Regards,
Wen
>
> Best regards,
> Liviu
>
> > ---
> > drivers/gpu/drm/arm/malidp_drv.c | 6 ++++++
> > drivers/gpu/drm/arm/malidp_hw.c | 9 +++++++++
> > drivers/gpu/drm/arm/malidp_hw.h | 3 +++
> > drivers/gpu/drm/arm/malidp_regs.h | 10 ++++++++++
> > 4 files changed, 28 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/arm/malidp_drv.c
> > b/drivers/gpu/drm/arm/malidp_drv.c
> > index 333b88a5efb0..8a76315aaa0f 100644
> > --- a/drivers/gpu/drm/arm/malidp_drv.c
> > +++ b/drivers/gpu/drm/arm/malidp_drv.c
> > @@ -817,6 +817,12 @@ static int malidp_bind(struct device *dev)
> >
> > malidp->core_id = version;
> >
> > + ret = of_property_read_u32(dev->of_node,
> > + "arm,malidp-arqos-value",
> > + &hwdev->arqos_value);
> > + if (ret)
> > + hwdev->arqos_value = 0x0;
> > +
> > /* set the number of lines used for output of RGB data */
> > ret = of_property_read_u8_array(dev->of_node,
> > "arm,malidp-output-port-lines",
> > diff --git a/drivers/gpu/drm/arm/malidp_hw.c
> > b/drivers/gpu/drm/arm/malidp_hw.c index bd8265f02e0b..ca570b135478
> > 100644
> > --- a/drivers/gpu/drm/arm/malidp_hw.c
> > +++ b/drivers/gpu/drm/arm/malidp_hw.c
> > @@ -379,6 +379,15 @@ static void malidp500_modeset(struct
> malidp_hw_device *hwdev, struct videomode *
> > malidp_hw_setbits(hwdev, MALIDP_DISP_FUNC_ILACED,
> MALIDP_DE_DISPLAY_FUNC);
> > else
> > malidp_hw_clearbits(hwdev, MALIDP_DISP_FUNC_ILACED,
> > MALIDP_DE_DISPLAY_FUNC);
> > +
> > + /*
> > + * Program the RQoS register to avoid high resolutions flicker
> > + * issue on the LS1028A.
> > + */
> > + if (hwdev->arqos_value) {
> > + val = hwdev->arqos_value;
> > + malidp_hw_setbits(hwdev, val,
> MALIDP500_RQOS_QUALITY);
> > + }
> > }
> >
> > int malidp_format_get_bpp(u32 fmt)
> > diff --git a/drivers/gpu/drm/arm/malidp_hw.h
> > b/drivers/gpu/drm/arm/malidp_hw.h index 968a65eed371..e4c36bc90bda
> > 100644
> > --- a/drivers/gpu/drm/arm/malidp_hw.h
> > +++ b/drivers/gpu/drm/arm/malidp_hw.h
> > @@ -251,6 +251,9 @@ struct malidp_hw_device {
> >
> > /* size of memory used for rotating layers, up to two banks available
> */
> > u32 rotation_memory[2];
> > +
> > + /* priority level of RQOS register used for driven the ARQOS signal */
> > + u32 arqos_value;
> > };
> >
> > static inline u32 malidp_hw_read(struct malidp_hw_device *hwdev, u32
> > reg) diff --git a/drivers/gpu/drm/arm/malidp_regs.h
> > b/drivers/gpu/drm/arm/malidp_regs.h
> > index 993031542fa1..514c50dcb74d 100644
> > --- a/drivers/gpu/drm/arm/malidp_regs.h
> > +++ b/drivers/gpu/drm/arm/malidp_regs.h
> > @@ -210,6 +210,16 @@
> > #define MALIDP500_CONFIG_VALID 0x00f00
> > #define MALIDP500_CONFIG_ID 0x00fd4
> >
> > +/*
> > + * The quality of service (QoS) register on the DP500. RQOS register
> > +values
> > + * are driven by the ARQOS signal, using AXI transacations, dependent
> > +on the
> > + * FIFO input level.
> > + * The RQOS register can also set QoS levels for:
> > + * - RED_ARQOS @ A 4-bit signal value for close to underflow
> conditions
> > + * - GREEN_ARQOS @ A 4-bit signal value for normal conditions
> > + */
> > +#define MALIDP500_RQOS_QUALITY 0x00500
> > +
> > /* register offsets and bits specific to DP550/DP650 */
> > #define MALIDP550_ADDR_SPACE_SIZE 0x10000
> > #define MALIDP550_DE_CONTROL 0x00010
> > --
> > 2.17.1
> >
>
> --
> ====================
> | I would like to |
> | fix the world, |
> | but they're not |
> | giving me the |
> \ source code! /
> ---------------
> ¯\_(ツ)_/¯
Powered by blists - more mailing lists