[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190916125022.10754-1-narmstrong@baylibre.com>
Date: Mon, 16 Sep 2019 14:50:16 +0200
From: Neil Armstrong <narmstrong@...libre.com>
To: khilman@...libre.com, lorenzo.pieralisi@....com, kishon@...com,
bhelgaas@...gle.com, andrew.murray@....com
Cc: Neil Armstrong <narmstrong@...libre.com>,
linux-amlogic@...ts.infradead.org, linux-pci@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
yue.wang@...ogic.com, maz@...nel.org, repk@...plefau.lt,
nick@...das.com, gouwa@...das.com
Subject: [PATCH v2 0/6] arm64: dts: meson-g12: add support for PCIe
This patchset :
- updates the Amlogic PCI bindings for G12A
- reworks the Amlogic PCIe driver to make use of the
G12a USB3+PCIe Combo PHY instead of directly writing in
the PHY register
- adds the necessary operations to the G12a USB3+PCIe Combo PHY driver
- adds the PCIe Node for G12A, G12B and SM1 SoCs
- adds the commented support for the S922X, A311D and S905D3 based
VIM3 boards.
The VIM3 schematic can be found at [1].
This patchset is dependent on Remi's "Fix reset assertion via gpio descriptor"
patch at [2].
This patchset has been tested in a A311D VIM3 and S905D3 VIM3L using a
128Go TS128GMTE110S NVMe PCIe module.
For indication, here is a bonnie++ run as ext4 formatted on the VIM3:
------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
4G 93865 99 312837 96 194487 23 102808 97 415501 21 +++++ +++
and the S905D3 VIM3L version:
------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
4G 52144 95 71766 21 47302 10 57078 98 415469 44 +++++ +++
Changes since v1 at [3]:
- Collected Andrew's and Rob's Reviewed-by tags
- Added missing calls to phy_init/phy_exit
- Fixes has_shared_phy handling for MIPI clock
- Add comment in the DT concerning firmware setting the right properties
- Added SM1 Power Domain to PCIe node
[1] https://docs.khadas.com/vim3/HardwareDocs.html
[2] https://patchwork.kernel.org/patch/11125261/
[3] https://patchwork.kernel.org/cover/11136927/
Neil Armstrong (6):
dt-bindings: pci: amlogic,meson-pcie: Add G12A bindings
PCI: amlogic: Fix probed clock names
PCI: amlogic: meson: Add support for G12A
phy: meson-g12a-usb3-pcie: Add support for PCIe mode
arm64: dts: meson-g12a: Add PCIe node
arm64: dts: khadas-vim3: add commented support for PCIe
.../bindings/pci/amlogic,meson-pcie.txt | 12 +-
.../boot/dts/amlogic/meson-g12-common.dtsi | 33 +++++
.../amlogic/meson-g12b-a311d-khadas-vim3.dts | 25 ++++
.../amlogic/meson-g12b-s922x-khadas-vim3.dts | 25 ++++
.../boot/dts/amlogic/meson-khadas-vim3.dtsi | 4 +
.../dts/amlogic/meson-sm1-khadas-vim3l.dts | 25 ++++
arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 4 +
drivers/pci/controller/dwc/pci-meson.c | 132 ++++++++++++++----
.../phy/amlogic/phy-meson-g12a-usb3-pcie.c | 70 ++++++++--
9 files changed, 292 insertions(+), 38 deletions(-)
--
2.22.0
Powered by blists - more mailing lists