[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1568708771-12409-3-git-send-email-light.hsieh@mediatek.com>
Date: Tue, 17 Sep 2019 16:26:09 +0800
From: Light Hsieh <light.hsieh@...iatek.com>
To: <linus.walleij@...aro.org>
CC: <linux-mediatek@...ts.infradead.org>, <linux-gpio@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <sean.wang@...nel.org>,
Light Hsieh <light.hsieh@...iatek.com>
Subject: [PATCH v3 3/5] pinctrl: mediatek: Refine mtk_pinconf_get() and mtk_pinconf_set()
1.Refine mtk_pinconf_get():
1.1 Use only one occurrence of return at end of this function.
1.2 Correct cases for PIN_CONFIG_SLEW_RATE, PIN_CONFIG_INPUT_SCHMITT_ENABLE,
and PIN_CONFIG_OUTPUT_ENABLE -
Use variable ret to receive value in mtk_hw_get_value() (instead of
variable val) since pinconf_to_config_packed() at end of this function
use variable ret to pack config value.
2.Refine mtk_pinconf_set():
2.1 Use only one occurrence of return at end of this function.
2.2 Modify case of PIN_CONFIG_INPUT_ENABLE -
Remove check of ies_present flag and always invoke mtk_hw_set_value()
since mtk_hw_pin_field_lookup() invoked inside mtk_hw_set_value() has
the same effect of checking if ies control is supported.
[The rationale is that: available of a control is always checked
in mtk_hw_pin_field_lookup() and no need to add ies_present flag
specially for ies control.]
2.3 Simply code logic for case of PIN_CONFIG_INPUT_SCHMITT.
2.4 Add case for PIN_CONFIG_INPUT_SCHMITT_ENABLE and process it with the
same code for case of PIN_CONFIG_INPUT_SCHMITT.
---
drivers/pinctrl/mediatek/pinctrl-mt6765.c | 1 -
drivers/pinctrl/mediatek/pinctrl-paris.c | 206 +++++++++++-------------------
2 files changed, 76 insertions(+), 131 deletions(-)
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt6765.c b/drivers/pinctrl/mediatek/pinctrl-mt6765.c
index e024ebc..bada37f 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt6765.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt6765.c
@@ -1070,7 +1070,6 @@
.ngrps = ARRAY_SIZE(mtk_pins_mt6765),
.eint_hw = &mt6765_eint_hw,
.gpio_m = 0,
- .ies_present = true,
.base_names = mt6765_pinctrl_register_base_names,
.nbase_names = ARRAY_SIZE(mt6765_pinctrl_register_base_names),
.bias_disable_set = mtk_pinconf_bias_disable_set,
diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 71c94b2..33d2340 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -78,93 +78,75 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
{
struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
u32 param = pinconf_to_config_param(*config);
- int val, val2, err, reg, ret = 1;
+ int err, reg, ret = 1;
const struct mtk_pin_desc *desc;
desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
- if (hw->soc->bias_disable_get) {
+ if (hw->soc->bias_disable_get)
err = hw->soc->bias_disable_get(hw, desc, &ret);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ else
+ err = -ENOTSUPP;
break;
case PIN_CONFIG_BIAS_PULL_UP:
- if (hw->soc->bias_get) {
+ if (hw->soc->bias_get)
err = hw->soc->bias_get(hw, desc, 1, &ret);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ else
+ err = -ENOTSUPP;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
- if (hw->soc->bias_get) {
+ if (hw->soc->bias_get)
err = hw->soc->bias_get(hw, desc, 0, &ret);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ else
+ err = -ENOTSUPP;
break;
case PIN_CONFIG_SLEW_RATE:
- err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_SR, &val);
- if (err)
- return err;
-
- if (!val)
- return -EINVAL;
-
+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_SR, &ret);
break;
case PIN_CONFIG_INPUT_ENABLE:
case PIN_CONFIG_OUTPUT_ENABLE:
- err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DIR, &val);
+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DIR, &ret);
if (err)
- return err;
-
- /* HW takes input mode as zero; output mode as non-zero */
- if ((val && param == PIN_CONFIG_INPUT_ENABLE) ||
- (!val && param == PIN_CONFIG_OUTPUT_ENABLE))
- return -EINVAL;
+ goto out;
+ /* CONFIG Current direction return value
+ * ------------- ----------------- ----------------------
+ * OUTPUT_ENABLE output 1 (= HW value)
+ * input 0 (= HW value)
+ * INPUT_ENABLE output 0 (= reverse HW value)
+ * input 1 (= reverse HW value)
+ */
+ if (param == PIN_CONFIG_INPUT_ENABLE)
+ ret = !ret;
break;
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
- err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DIR, &val);
- if (err)
- return err;
-
- err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_SMT, &val2);
+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DIR, &ret);
if (err)
- return err;
+ goto out;
+ /* return error when in output mode
+ * because schmitt trigger only work in input mode
+ */
+ if (ret) {
+ err = -EINVAL;
+ goto out;
+ }
- if (val || !val2)
- return -EINVAL;
+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_SMT, &ret);
break;
case PIN_CONFIG_DRIVE_STRENGTH:
- if (hw->soc->drive_get) {
+ if (hw->soc->drive_get)
err = hw->soc->drive_get(hw, desc, &ret);
- if (err)
- return err;
- } else {
+ else
err = -ENOTSUPP;
- }
break;
case MTK_PIN_CONFIG_TDSEL:
case MTK_PIN_CONFIG_RDSEL:
reg = (param == MTK_PIN_CONFIG_TDSEL) ?
PINCTRL_PIN_REG_TDSEL : PINCTRL_PIN_REG_RDSEL;
-
- err = mtk_hw_get_value(hw, desc, reg, &val);
- if (err)
- return err;
-
- ret = val;
-
+ err = mtk_hw_get_value(hw, desc, reg, &ret);
break;
case MTK_PIN_CONFIG_PU_ADV:
case MTK_PIN_CONFIG_PD_ADV:
@@ -173,28 +155,24 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
pullup = param == MTK_PIN_CONFIG_PU_ADV;
err = hw->soc->adv_pull_get(hw, desc, pullup, &ret);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ } else
+ err = -ENOTSUPP;
break;
case MTK_PIN_CONFIG_DRV_ADV:
- if (hw->soc->adv_drive_get) {
+ if (hw->soc->adv_drive_get)
err = hw->soc->adv_drive_get(hw, desc, &ret);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ else
+ err = -ENOTSUPP;
break;
default:
- return -ENOTSUPP;
+ err = -ENOTSUPP;
}
- *config = pinconf_to_config_packed(param, ret);
+out:
+ if (!err)
+ *config = pinconf_to_config_packed(param, ret);
- return 0;
+ return err;
}
static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
@@ -210,60 +188,46 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
switch ((u32)param) {
case PIN_CONFIG_BIAS_DISABLE:
- if (hw->soc->bias_disable_set) {
+ if (hw->soc->bias_disable_set)
err = hw->soc->bias_disable_set(hw, desc);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ else
+ err = -ENOTSUPP;
break;
case PIN_CONFIG_BIAS_PULL_UP:
- if (hw->soc->bias_set) {
+ if (hw->soc->bias_set)
err = hw->soc->bias_set(hw, desc, 1);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ else
+ err = -ENOTSUPP;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
- if (hw->soc->bias_set) {
+ if (hw->soc->bias_set)
err = hw->soc->bias_set(hw, desc, 0);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ else
+ err = -ENOTSUPP;
break;
case PIN_CONFIG_OUTPUT_ENABLE:
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SMT,
MTK_DISABLE);
- if (err)
+ /* keep set direction to if SMT is not supported on this pin */
+ if (err != -ENOTSUPP)
goto err;
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
MTK_OUTPUT);
- if (err)
- goto err;
break;
case PIN_CONFIG_INPUT_ENABLE:
- if (hw->soc->ies_present) {
- mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_IES,
- MTK_ENABLE);
- }
+ /* regard all non-zero value as enable */
+ mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_IES, !!arg);
- err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
- MTK_INPUT);
if (err)
goto err;
+
+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
+ MTK_INPUT);
break;
case PIN_CONFIG_SLEW_RATE:
- err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SR,
- arg);
- if (err)
- goto err;
-
+ /* regard all non-zero value as enable */
+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SR, !!arg);
break;
case PIN_CONFIG_OUTPUT:
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
@@ -273,41 +237,29 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DO,
arg);
- if (err)
- goto err;
break;
+ case PIN_CONFIG_INPUT_SCHMITT:
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
- /* arg = 1: Input mode & SMT enable ;
+ /* arg = 1: Input mode & SMT enable
* arg = 0: Output mode & SMT disable
*/
- arg = arg ? 2 : 1;
- err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
- arg & 1);
+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR, !arg);
if (err)
goto err;
- err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SMT,
- !!(arg & 2));
- if (err)
- goto err;
+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SMT, !!arg);
break;
case PIN_CONFIG_DRIVE_STRENGTH:
- if (hw->soc->drive_set) {
+ if (hw->soc->drive_set)
err = hw->soc->drive_set(hw, desc, arg);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ else
+ err = -ENOTSUPP;
break;
case MTK_PIN_CONFIG_TDSEL:
case MTK_PIN_CONFIG_RDSEL:
reg = (param == MTK_PIN_CONFIG_TDSEL) ?
PINCTRL_PIN_REG_TDSEL : PINCTRL_PIN_REG_RDSEL;
-
err = mtk_hw_set_value(hw, desc, reg, arg);
- if (err)
- goto err;
break;
case MTK_PIN_CONFIG_PU_ADV:
case MTK_PIN_CONFIG_PD_ADV:
@@ -317,20 +269,14 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
pullup = param == MTK_PIN_CONFIG_PU_ADV;
err = hw->soc->adv_pull_set(hw, desc, pullup,
arg);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ } else
+ err = -ENOTSUPP;
break;
case MTK_PIN_CONFIG_DRV_ADV:
- if (hw->soc->adv_drive_set) {
+ if (hw->soc->adv_drive_set)
err = hw->soc->adv_drive_set(hw, desc, arg);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ else
+ err = -ENOTSUPP;
break;
default:
err = -ENOTSUPP;
@@ -946,6 +892,7 @@ int mtk_paris_pinctrl_probe(struct platform_device *pdev,
return 0;
}
+
static int mtk_paris_pinctrl_suspend(struct device *device)
{
struct mtk_pinctrl *pctl = dev_get_drvdata(device);
@@ -964,4 +911,3 @@ static int mtk_paris_pinctrl_resume(struct device *device)
.suspend_noirq = mtk_paris_pinctrl_suspend,
.resume_noirq = mtk_paris_pinctrl_resume,
};
-
--
1.8.1.1.dirty
Powered by blists - more mailing lists