[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190917155426.7432-4-tudor.ambarus@microchip.com>
Date: Tue, 17 Sep 2019 15:54:50 +0000
From: <Tudor.Ambarus@...rochip.com>
To: <vigneshr@...com>, <boris.brezillon@...labora.com>,
<marek.vasut@...il.com>, <miquel.raynal@...tlin.com>,
<richard@....at>, <linux-mtd@...ts.infradead.org>
CC: <dwmw2@...radead.org>, <computersforpeace@...il.com>,
<joel@....id.au>, <andrew@...id.au>, <matthias.bgg@...il.com>,
<vz@...ia.com>, <linux-arm-kernel@...ts.infradead.org>,
<linux-aspeed@...ts.ozlabs.org>, <linux-kernel@...r.kernel.org>,
<linux-mediatek@...ts.infradead.org>, <Tudor.Ambarus@...rochip.com>
Subject: [PATCH 03/23] mtd: spi-nor: cadence-quadspi: Fix cqspi_command_read()
definition
From: Tudor Ambarus <tudor.ambarus@...rochip.com>
n_tx was never used, drop it. Replace 'const u8 *txbuf' with 'u8 opcode',
to comply with the SPI NOR int (*read_reg)() method. The 'const'
qualifier has no meaning for parameters passed by value, drop it.
Going furher, the opcode was passed to cqspi_calc_rdreg() and never used,
drop it.
Signed-off-by: Tudor Ambarus <tudor.ambarus@...rochip.com>
---
drivers/mtd/spi-nor/cadence-quadspi.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c
index ebda612641a4..22008fecd326 100644
--- a/drivers/mtd/spi-nor/cadence-quadspi.c
+++ b/drivers/mtd/spi-nor/cadence-quadspi.c
@@ -285,7 +285,7 @@ static irqreturn_t cqspi_irq_handler(int this_irq, void *dev)
return IRQ_HANDLED;
}
-static unsigned int cqspi_calc_rdreg(struct spi_nor *nor, const u8 opcode)
+static unsigned int cqspi_calc_rdreg(struct spi_nor *nor)
{
struct cqspi_flash_pdata *f_pdata = nor->priv;
u32 rdreg = 0;
@@ -354,8 +354,7 @@ static int cqspi_exec_flash_cmd(struct cqspi_st *cqspi, unsigned int reg)
return cqspi_wait_idle(cqspi);
}
-static int cqspi_command_read(struct spi_nor *nor,
- const u8 *txbuf, const unsigned n_tx,
+static int cqspi_command_read(struct spi_nor *nor, u8 opcode,
u8 *rxbuf, size_t n_rx)
{
struct cqspi_flash_pdata *f_pdata = nor->priv;
@@ -373,9 +372,9 @@ static int cqspi_command_read(struct spi_nor *nor,
return -EINVAL;
}
- reg = txbuf[0] << CQSPI_REG_CMDCTRL_OPCODE_LSB;
+ reg = opcode << CQSPI_REG_CMDCTRL_OPCODE_LSB;
- rdreg = cqspi_calc_rdreg(nor, txbuf[0]);
+ rdreg = cqspi_calc_rdreg(nor);
writel(rdreg, reg_base + CQSPI_REG_RD_INSTR);
reg |= (0x1 << CQSPI_REG_CMDCTRL_RD_EN_LSB);
@@ -471,7 +470,7 @@ static int cqspi_read_setup(struct spi_nor *nor)
unsigned int reg;
reg = nor->read_opcode << CQSPI_REG_RD_INSTR_OPCODE_LSB;
- reg |= cqspi_calc_rdreg(nor, nor->read_opcode);
+ reg |= cqspi_calc_rdreg(nor);
/* Setup dummy clock cycles */
dummy_clk = nor->read_dummy;
@@ -604,7 +603,7 @@ static int cqspi_write_setup(struct spi_nor *nor)
/* Set opcode. */
reg = nor->program_opcode << CQSPI_REG_WR_INSTR_OPCODE_LSB;
writel(reg, reg_base + CQSPI_REG_WR_INSTR);
- reg = cqspi_calc_rdreg(nor, nor->program_opcode);
+ reg = cqspi_calc_rdreg(nor);
writel(reg, reg_base + CQSPI_REG_RD_INSTR);
reg = readl(reg_base + CQSPI_REG_SIZE);
@@ -1087,7 +1086,7 @@ static int cqspi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, size_t len)
ret = cqspi_set_protocol(nor, 0);
if (!ret)
- ret = cqspi_command_read(nor, &opcode, 1, buf, len);
+ ret = cqspi_command_read(nor, opcode, buf, len);
return ret;
}
--
2.9.5
Powered by blists - more mailing lists