linux-kernel - Re: [PATCH] nvme-pci: Save PCI state before putting drive into deepest state

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <10489808.bq04Fa26WH@kreacher>
Date:   Wed, 18 Sep 2019 23:57:07 +0200
From:   "Rafael J. Wysocki" <rjw@...ysocki.net>
To:     Mario.Limonciello@...l.com
Cc:     kbusch@...nel.org, axboe@...com, hch@....de, sagi@...mberg.me,
        linux-nvme@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Ryan.Hong@...l.com, Crag.Wang@...l.com, sjg@...gle.com,
        Jared.Dominguez@...l.com, linux-pci@...r.kernel.org,
        linux-pm@...r.kernel.org
Subject: Re: [PATCH] nvme-pci: Save PCI state before putting drive into deepest state

On Wednesday, September 18, 2019 11:43:28 PM CEST Mario.Limonciello@...l.com wrote:
> > -----Original Message-----
> > From: Rafael J. Wysocki <rjw@...ysocki.net>
> > Sent: Wednesday, September 18, 2019 4:31 PM
> > To: Limonciello, Mario
> > Cc: Keith Busch; Jens Axboe; Christoph Hellwig; Sagi Grimberg; linux-
> > nvme@...ts.infradead.org; LKML; Hong, Ryan; Wang, Crag; sjg@...gle.com;
> > Dominguez, Jared; Linux PCI; Linux PM
> > Subject: Re: [PATCH] nvme-pci: Save PCI state before putting drive into deepest
> > state
> > 
> > 
> > [EXTERNAL EMAIL]
> > 
> > On Thursday, September 12, 2019 1:42:33 AM CEST Mario Limonciello wrote:
> > > The action of saving the PCI state will cause numerous PCI configuration
> > > space reads which depending upon the vendor implementation may cause
> > > the drive to exit the deepest NVMe state.
> > >
> > > In these cases ASPM will typically resolve the PCIe link state and APST
> > > may resolve the NVMe power state.  However it has also been observed
> > > that this register access after quiesced will cause PC10 failure
> > > on some device combinations.
> > >
> > > To resolve this, move the PCI state saving to before SetFeatures has been
> > > called.  This has been proven to resolve the issue across a 5000 sample
> > > test on previously failing disk/system combinations.
> > 
> > This sounds reasonable to me, but it would be nice to CC that to linux-pm
> > and/or linux-pci too.
> > 
> > > Signed-off-by: Mario Limonciello <mario.limonciello@...l.com>
> > > ---
> > >  drivers/nvme/host/pci.c | 13 +++++++------
> > >  1 file changed, 7 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
> > > index 732d5b6..9b3fed4 100644
> > > --- a/drivers/nvme/host/pci.c
> > > +++ b/drivers/nvme/host/pci.c
> > > @@ -2894,6 +2894,13 @@ static int nvme_suspend(struct device *dev)
> > >  	if (ret < 0)
> > >  		goto unfreeze;
> > >
> > > +	/*
> > > +	 * A saved state prevents pci pm from generically controlling the
> > > +	 * device's power. If we're using protocol specific settings, we don't
> > > +	 * want pci interfering.
> > > +	 */
> > > +	pci_save_state(pdev);
> > > +
> > >  	ret = nvme_set_power_state(ctrl, ctrl->npss);
> > >  	if (ret < 0)
> > >  		goto unfreeze;
> > > @@ -2908,12 +2915,6 @@ static int nvme_suspend(struct device *dev)
> > 
> > This is the case in which the PCI layer is expected to put the device into
> > D3, so you need
> > 
> > pdev->state_saved = 0;
> > 
> > at this point, because you have saved the config space already.
> > 
> > >  		ret = 0;
> > >  		goto unfreeze;
> > 
> > And here you don't need to jump to "unfreeze" any more.
> > 
> > >  	}
> > > -	/*
> > > -	 * A saved state prevents pci pm from generically controlling the
> > > -	 * device's power. If we're using protocol specific settings, we don't
> > > -	 * want pci interfering.
> > > -	 */
> > > -	pci_save_state(pdev);
> > >  unfreeze:
> > >  	nvme_unfreeze(ctrl);
> > >  	return ret;
> > >
> > 
> > 
> > 
> 
> Thanks, I actually followed up with something along that line in a v2 sent out
> today.  My apology you weren't in CC, but here is a weblink to it.
> http://lists.infradead.org/pipermail/linux-nvme/2019-September/027251.html
> 

I don't think that pci_load_saved_state() will work, because it sets
state_saved at the end again (if all goes well).  You simply only need to
clear state_saved here.