linux-kernel - [PATCH v2] serial: sprd: Add polling IO support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <f112a741c053ac5fb0637e2f058be81e17f78ccc.1568862391.git.liuhhome@gmail.com>
Date:   Thu, 19 Sep 2019 11:10:37 +0800
From:   Lanqing Liu <liuhhome@...il.com>
To:     gregkh@...uxfoundation.org, jslaby@...e.com
Cc:     baolin.wang@...aro.org, lanqing.liu@...soc.com,
        linux-serial@...r.kernel.org, linux-kernel@...r.kernel.org,
        orsonzhai@...il.com, zhang.lyra@...il.com
Subject: [PATCH v2] serial: sprd: Add polling IO support

In order to access the UART without the interrupts, the kernel uses
the basic polling methods for IO with the device. With these methods
implemented, it is now possible to enable kgdb during early boot over serial.

Signed-off-by: Lanqing Liu <liuhhome@...il.com>
---
Change from v1:
 - Add poll_init() support.
---
 drivers/tty/serial/sprd_serial.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
index 73d71a4..d833160 100644
--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -911,6 +911,34 @@ static void sprd_pm(struct uart_port *port, unsigned int state,
 	}
 }
 
+#ifdef CONFIG_CONSOLE_POLL
+static int sprd_poll_init(struct uart_port *port)
+{
+	if (port->state->pm_state != UART_PM_STATE_ON) {
+		sprd_pm(port, UART_PM_STATE_ON, 0);
+		port->state->pm_state = UART_PM_STATE_ON;
+	}
+
+	return 0;
+}
+
+static int sprd_poll_get_char(struct uart_port *port)
+{
+	while (!(serial_in(port, SPRD_STS1) & SPRD_RX_FIFO_CNT_MASK))
+		cpu_relax();
+
+	return serial_in(port, SPRD_RXD);
+}
+
+static void sprd_poll_put_char(struct uart_port *port, unsigned char ch)
+{
+	while (serial_in(port, SPRD_STS1) & SPRD_TX_FIFO_CNT_MASK)
+		cpu_relax();
+
+	serial_out(port, SPRD_TXD, ch);
+}
+#endif
+
 static const struct uart_ops serial_sprd_ops = {
 	.tx_empty = sprd_tx_empty,
 	.get_mctrl = sprd_get_mctrl,
@@ -928,6 +956,11 @@ static void sprd_pm(struct uart_port *port, unsigned int state,
 	.config_port = sprd_config_port,
 	.verify_port = sprd_verify_port,
 	.pm = sprd_pm,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_init	= sprd_poll_init,
+	.poll_get_char	= sprd_poll_get_char,
+	.poll_put_char	= sprd_poll_put_char,
+#endif
 };
 
 #ifdef CONFIG_SERIAL_SPRD_CONSOLE
-- 
1.9.1