| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190919150809.446771597@linutronix.de>
Date: Thu, 19 Sep 2019 17:03:24 +0200
From: Thomas Gleixner <tglx@...utronix.de>
To: LKML <linux-kernel@...r.kernel.org>
Cc: x86@...nel.org, Peter Zijlstra <peterz@...radead.org>,
Andy Lutomirski <luto@...nel.org>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Marc Zyngier <maz@...nel.org>,
Paolo Bonzini <pbonzini@...hat.com>, kvm@...r.kernel.org,
linux-arch@...r.kernel.org
Subject: [RFC patch 10/15] x86/entry: Move irq tracing to C code
To prepare for converting the exit to usermode code to the generic version,
move the irqflags tracing into C code.
Signed-off-by: Thomas Gleixner <tglx@...utronix.de>
---
arch/x86/entry/common.c | 10 ++++++++++
arch/x86/entry/entry_32.S | 11 +----------
arch/x86/entry/entry_64.S | 10 ++--------
arch/x86/entry/entry_64_compat.S | 21 ---------------------
4 files changed, 13 insertions(+), 39 deletions(-)
--- a/arch/x86/entry/common.c
+++ b/arch/x86/entry/common.c
@@ -102,6 +102,8 @@ static void exit_to_usermode_loop(struct
struct thread_info *ti = current_thread_info();
u32 cached_flags;
+ trace_hardirqs_off();
+
addr_limit_user_check();
lockdep_assert_irqs_disabled();
@@ -137,6 +139,8 @@ static void exit_to_usermode_loop(struct
user_enter_irqoff();
mds_user_clear_cpu_buffers();
+
+ trace_hardirqs_on();
}
/*
@@ -154,6 +158,8 @@ static void exit_to_usermode_loop(struct
#ifdef CONFIG_X86_64
__visible void do_syscall_64(unsigned long nr, struct pt_regs *regs)
{
+ /* User to kernel transition disabled interrupts. */
+ trace_hardirqs_off();
enter_from_user_mode();
local_irq_enable();
@@ -221,6 +227,7 @@ static __always_inline void do_syscall_3
/* Handles int $0x80 */
__visible void do_int80_syscall_32(struct pt_regs *regs)
{
+ trace_hardirqs_off();
enter_from_user_mode();
local_irq_enable();
do_syscall_32_irqs_on(regs);
@@ -237,6 +244,9 @@ static __always_inline void do_syscall_3
unsigned long landing_pad = (unsigned long)current->mm->context.vdso +
vdso_image_32.sym_int80_landing_pad;
+ /* User to kernel transition disabled interrupts. */
+ trace_hardirqs_off();
+
/*
* SYSENTER loses EIP, and even SYSCALL32 needs us to skip forward
* so that 'regs->ip -= 2' lands back on an int $0x80 instruction.
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -827,7 +827,6 @@ END(ret_from_fork)
ENTRY(resume_userspace)
DISABLE_INTERRUPTS(CLBR_ANY)
- TRACE_IRQS_OFF
movl %esp, %eax
call prepare_exit_to_usermode
jmp restore_all
@@ -1049,12 +1048,6 @@ ENTRY(entry_INT80_32)
SAVE_ALL pt_regs_ax=$-ENOSYS switch_stacks=1 /* save rest */
- /*
- * User mode is traced as though IRQs are on, and the interrupt gate
- * turned them off.
- */
- TRACE_IRQS_OFF
-
movl %esp, %eax
call do_int80_syscall_32
.Lsyscall_32_done:
@@ -1062,11 +1055,8 @@ ENTRY(entry_INT80_32)
STACKLEAK_ERASE
restore_all:
- TRACE_IRQS_IRET
SWITCH_TO_ENTRY_STACK
-.Lrestore_all_notrace:
CHECK_AND_APPLY_ESPFIX
-.Lrestore_nocheck:
/* Switch back to user CR3 */
SWITCH_TO_USER_CR3 scratch_reg=%eax
@@ -1086,6 +1076,7 @@ ENTRY(entry_INT80_32)
restore_all_kernel:
#ifdef CONFIG_PREEMPTION
DISABLE_INTERRUPTS(CLBR_ANY)
+ TRACE_IRQS_OFF
cmpl $0, PER_CPU_VAR(__preempt_count)
jnz .Lno_preempt
testl $X86_EFLAGS_IF, PT_EFLAGS(%esp) # interrupts off (exception path) ?
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -167,15 +167,11 @@ GLOBAL(entry_SYSCALL_64_after_hwframe)
PUSH_AND_CLEAR_REGS rax=$-ENOSYS
- TRACE_IRQS_OFF
-
/* IRQs are off. */
movq %rax, %rdi
movq %rsp, %rsi
call do_syscall_64 /* returns with IRQs disabled */
- TRACE_IRQS_IRETQ /* we're about to change IF */
-
/*
* Try to use SYSRET instead of IRET if we're returning to
* a completely clean 64-bit userspace context. If we're not,
@@ -342,7 +338,6 @@ ENTRY(ret_from_fork)
UNWIND_HINT_REGS
movq %rsp, %rdi
call syscall_return_slowpath /* returns with IRQs disabled */
- TRACE_IRQS_ON /* user mode is traced as IRQS on */
jmp swapgs_restore_regs_and_return_to_usermode
1:
@@ -608,7 +603,6 @@ END(common_spurious)
/* 0(%rsp): old RSP */
ret_from_intr:
DISABLE_INTERRUPTS(CLBR_ANY)
- TRACE_IRQS_OFF
LEAVE_IRQ_STACK
@@ -619,7 +613,6 @@ END(common_spurious)
GLOBAL(retint_user)
mov %rsp,%rdi
call prepare_exit_to_usermode
- TRACE_IRQS_IRETQ
GLOBAL(swapgs_restore_regs_and_return_to_usermode)
#ifdef CONFIG_DEBUG_ENTRY
@@ -666,6 +659,7 @@ GLOBAL(swapgs_restore_regs_and_return_to
retint_kernel:
#ifdef CONFIG_PREEMPTION
/* Interrupts are off */
+ TRACE_IRQS_OFF
/* Check if we need preemption */
btl $9, EFLAGS(%rsp) /* were interrupts off? */
jnc 1f
@@ -1367,9 +1361,9 @@ ENTRY(error_entry)
END(error_entry)
ENTRY(error_exit)
- UNWIND_HINT_REGS
DISABLE_INTERRUPTS(CLBR_ANY)
TRACE_IRQS_OFF
+ UNWIND_HINT_REGS
testb $3, CS(%rsp)
jz retint_kernel
jmp retint_user
--- a/arch/x86/entry/entry_64_compat.S
+++ b/arch/x86/entry/entry_64_compat.S
@@ -129,12 +129,6 @@ ENTRY(entry_SYSENTER_compat)
jnz .Lsysenter_fix_flags
.Lsysenter_flags_fixed:
- /*
- * User mode is traced as though IRQs are on, and SYSENTER
- * turned them off.
- */
- TRACE_IRQS_OFF
-
movq %rsp, %rdi
call do_fast_syscall_32
/* XEN PV guests always use IRET path */
@@ -247,12 +241,6 @@ GLOBAL(entry_SYSCALL_compat_after_hwfram
pushq $0 /* pt_regs->r15 = 0 */
xorl %r15d, %r15d /* nospec r15 */
- /*
- * User mode is traced as though IRQs are on, and SYSENTER
- * turned them off.
- */
- TRACE_IRQS_OFF
-
movq %rsp, %rdi
call do_fast_syscall_32
/* XEN PV guests always use IRET path */
@@ -266,7 +254,6 @@ GLOBAL(entry_SYSCALL_compat_after_hwfram
* stack. So let's erase the thread stack right now.
*/
STACKLEAK_ERASE
- TRACE_IRQS_ON /* User mode traces as IRQs on. */
movq RBX(%rsp), %rbx /* pt_regs->rbx */
movq RBP(%rsp), %rbp /* pt_regs->rbp */
movq EFLAGS(%rsp), %r11 /* pt_regs->flags (in r11) */
@@ -403,17 +390,9 @@ ENTRY(entry_INT80_compat)
xorl %r15d, %r15d /* nospec r15 */
cld
- /*
- * User mode is traced as though IRQs are on, and the interrupt
- * gate turned them off.
- */
- TRACE_IRQS_OFF
-
movq %rsp, %rdi
call do_int80_syscall_32
.Lsyscall_32_done:
- /* Go back to user mode. */
- TRACE_IRQS_ON
jmp swapgs_restore_regs_and_return_to_usermode
END(entry_INT80_compat)
Powered by blists - more mailing lists