linux-kernel - [PATCH] clk: at91: avoid sleeping early

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190920153906.20887-1-alexandre.belloni@bootlin.com>
Date:   Fri, 20 Sep 2019 17:39:06 +0200
From:   Alexandre Belloni <alexandre.belloni@...tlin.com>
To:     Stephen Boyd <sboyd@...nel.org>
Cc:     Nicolas Ferre <nicolas.ferre@...rochip.com>,
        Claudiu Beznea <claudiu.beznea@...rochip.com>,
        Michael Turquette <mturquette@...libre.com>,
        linux-clk@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org,
        Alexandre Belloni <alexandre.belloni@...tlin.com>,
        Uwe Kleine-König 
        <u.kleine-koenig@...gutronix.de>
Subject: [PATCH] clk: at91: avoid sleeping early

It is not allowed to sleep to early in the boot process and this may lead
to kernel issues if the bootloader didn't prepare the slow clock and main
clock.

This results in the following error and dump stack on the AriettaG25:
   bad: scheduling from the idle thread!

Ensure it is possible to sleep, else simply have a delay.

Reported-by: Uwe Kleine-König <u.kleine-koenig@...gutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@...tlin.com>
---

Note that this was already discussed a while ago and Arnd said this approach was
reasonable:
  https://lore.kernel.org/lkml/6120818.MyeJZ74hYa@wuerfel/

 drivers/clk/at91/clk-main.c |  5 ++++-
 drivers/clk/at91/sckc.c     | 20 ++++++++++++++++----
 2 files changed, 20 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c
index f607ee702c83..ccd48e7a3d74 100644
--- a/drivers/clk/at91/clk-main.c
+++ b/drivers/clk/at91/clk-main.c
@@ -293,7 +293,10 @@ static int clk_main_probe_frequency(struct regmap *regmap)
 		regmap_read(regmap, AT91_CKGR_MCFR, &mcfr);
 		if (mcfr & AT91_PMC_MAINRDY)
 			return 0;
-		usleep_range(MAINF_LOOP_MIN_WAIT, MAINF_LOOP_MAX_WAIT);
+		if (system_state < SYSTEM_RUNNING)
+			udelay(MAINF_LOOP_MIN_WAIT);
+		else
+			usleep_range(MAINF_LOOP_MIN_WAIT, MAINF_LOOP_MAX_WAIT);
 	} while (time_before(prep_time, timeout));
 
 	return -ETIMEDOUT;
diff --git a/drivers/clk/at91/sckc.c b/drivers/clk/at91/sckc.c
index 9bfe9a28294a..fac0ca56d42d 100644
--- a/drivers/clk/at91/sckc.c
+++ b/drivers/clk/at91/sckc.c
@@ -76,7 +76,10 @@ static int clk_slow_osc_prepare(struct clk_hw *hw)
 
 	writel(tmp | osc->bits->cr_osc32en, sckcr);
 
-	usleep_range(osc->startup_usec, osc->startup_usec + 1);
+	if (system_state < SYSTEM_RUNNING)
+		udelay(osc->startup_usec);
+	else
+		usleep_range(osc->startup_usec, osc->startup_usec + 1);
 
 	return 0;
 }
@@ -187,7 +190,10 @@ static int clk_slow_rc_osc_prepare(struct clk_hw *hw)
 
 	writel(readl(sckcr) | osc->bits->cr_rcen, sckcr);
 
-	usleep_range(osc->startup_usec, osc->startup_usec + 1);
+	if (system_state < SYSTEM_RUNNING)
+		udelay(osc->startup_usec);
+	else
+		usleep_range(osc->startup_usec, osc->startup_usec + 1);
 
 	return 0;
 }
@@ -288,7 +294,10 @@ static int clk_sam9x5_slow_set_parent(struct clk_hw *hw, u8 index)
 
 	writel(tmp, sckcr);
 
-	usleep_range(SLOWCK_SW_TIME_USEC, SLOWCK_SW_TIME_USEC + 1);
+	if (system_state < SYSTEM_RUNNING)
+		udelay(SLOWCK_SW_TIME_USEC);
+	else
+		usleep_range(SLOWCK_SW_TIME_USEC, SLOWCK_SW_TIME_USEC + 1);
 
 	return 0;
 }
@@ -533,7 +542,10 @@ static int clk_sama5d4_slow_osc_prepare(struct clk_hw *hw)
 		return 0;
 	}
 
-	usleep_range(osc->startup_usec, osc->startup_usec + 1);
+	if (system_state < SYSTEM_RUNNING)
+		udelay(osc->startup_usec);
+	else
+		usleep_range(osc->startup_usec, osc->startup_usec + 1);
 	osc->prepared = true;
 
 	return 0;
-- 
2.21.0