| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <8ad9dea9-efb5-4be3-0a14-651df468d80d@gmail.com>
Date: Mon, 23 Sep 2019 01:35:02 +0300
From: Dmitry Osipenko <digetx@...il.com>
To: Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Peter De Schrijver <pdeschrijver@...dia.com>
Cc: linux-tegra@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 1/2] soc/tegra: pmc: Query PCLK clock rate at probe
time
04.08.2019 23:29, Dmitry Osipenko пишет:
> It is possible to get a lockup if kernel decides to enter LP2 cpuidle
> from some clk-notifier, in that case CCF's "prepare" mutex is kept locked
> and thus clk_get_rate(pclk) blocks on the same mutex with interrupts being
> disabled.
>
> Signed-off-by: Dmitry Osipenko <digetx@...il.com>
> ---
>
> Changelog:
>
> v4: Added clk-notifier to track PCLK rate-changes, which may become useful
> in the future. That's done in response to v3 review comment from Peter
> De Schrijver.
>
> Now properly handling case where clk pointer is intentionally NULL on
> the driver's probe.
>
> v3: Changed commit's message because I actually recalled what was the
> initial reason for the patch, since the problem reoccurred once again.
>
> v2: Addressed review comments that were made by Jon Hunter to v1 by
> not moving the memory barrier, replacing one missed clk_get_rate()
> with pmc->rate, handling possible clk_get_rate() error on probe and
> slightly adjusting the commits message.
>
> drivers/soc/tegra/pmc.c | 71 ++++++++++++++++++++++++++++++-----------
> 1 file changed, 53 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
> index 9f9c1c677cf4..4e44943d0b26 100644
> --- a/drivers/soc/tegra/pmc.c
> +++ b/drivers/soc/tegra/pmc.c
> @@ -309,6 +309,7 @@ static const char * const tegra210_reset_sources[] = {
> * @pctl_dev: pin controller exposed by the PMC
> * @domain: IRQ domain provided by the PMC
> * @irq: chip implementation for the IRQ domain
> + * @clk_nb: pclk clock changes handler
> */
> struct tegra_pmc {
> struct device *dev;
> @@ -344,6 +345,8 @@ struct tegra_pmc {
>
> struct irq_domain *domain;
> struct irq_chip irq;
> +
> + struct notifier_block clk_nb;
> };
>
> static struct tegra_pmc *pmc = &(struct tegra_pmc) {
> @@ -1192,7 +1195,7 @@ static int tegra_io_pad_prepare(struct tegra_pmc *pmc, enum tegra_io_pad id,
> return err;
>
> if (pmc->clk) {
> - rate = clk_get_rate(pmc->clk);
> + rate = pmc->rate;
> if (!rate) {
> dev_err(pmc->dev, "failed to get clock rate\n");
> return -ENODEV;
> @@ -1433,6 +1436,7 @@ void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode)
> void tegra_pmc_enter_suspend_mode(enum tegra_suspend_mode mode)
> {
> unsigned long long rate = 0;
> + u64 ticks;
> u32 value;
>
> switch (mode) {
> @@ -1441,31 +1445,22 @@ void tegra_pmc_enter_suspend_mode(enum tegra_suspend_mode mode)
> break;
>
> case TEGRA_SUSPEND_LP2:
> - rate = clk_get_rate(pmc->clk);
> + rate = pmc->rate;
> break;
>
> default:
> break;
> }
>
> - if (WARN_ON_ONCE(rate == 0))
> - rate = 100000000;
> -
> - if (rate != pmc->rate) {
> - u64 ticks;
> -
> - ticks = pmc->cpu_good_time * rate + USEC_PER_SEC - 1;
> - do_div(ticks, USEC_PER_SEC);
> - tegra_pmc_writel(pmc, ticks, PMC_CPUPWRGOOD_TIMER);
> + ticks = pmc->cpu_good_time * rate + USEC_PER_SEC - 1;
> + do_div(ticks, USEC_PER_SEC);
> + tegra_pmc_writel(pmc, ticks, PMC_CPUPWRGOOD_TIMER);
>
> - ticks = pmc->cpu_off_time * rate + USEC_PER_SEC - 1;
> - do_div(ticks, USEC_PER_SEC);
> - tegra_pmc_writel(pmc, ticks, PMC_CPUPWROFF_TIMER);
> + ticks = pmc->cpu_off_time * rate + USEC_PER_SEC - 1;
> + do_div(ticks, USEC_PER_SEC);
> + tegra_pmc_writel(pmc, ticks, PMC_CPUPWROFF_TIMER);
>
> - wmb();
> -
> - pmc->rate = rate;
> - }
> + wmb();
>
> value = tegra_pmc_readl(pmc, PMC_CNTRL);
> value &= ~PMC_CNTRL_SIDE_EFFECT_LP0;
> @@ -2019,6 +2014,20 @@ static int tegra_pmc_irq_init(struct tegra_pmc *pmc)
> return 0;
> }
>
> +static int tegra_pmc_clk_notify_cb(struct notifier_block *nb,
> + unsigned long action, void *ptr)
> +{
> + struct clk_notifier_data *data = ptr;
> + struct tegra_pmc *pmc;
> +
> + if (action == POST_RATE_CHANGE) {
> + pmc = container_of(nb, struct tegra_pmc, clk_nb);
> + pmc->rate = data->new_rate;
> + }
> +
> + return NOTIFY_OK;
> +}
> +
> static int tegra_pmc_probe(struct platform_device *pdev)
> {
> void __iomem *base;
> @@ -2082,6 +2091,30 @@ static int tegra_pmc_probe(struct platform_device *pdev)
> pmc->clk = NULL;
> }
>
> + /*
> + * PCLK clock rate can't be retrieved using CLK API because it
> + * causes lockup if CPU enters LP2 idle state from some other
> + * CLK notifier, hence we're caching the rate's value locally.
> + */
> + if (pmc->clk) {
> + pmc->clk_nb.notifier_call = tegra_pmc_clk_notify_cb;
> + err = clk_notifier_register(pmc->clk, &pmc->clk_nb);
> + if (err) {
> + dev_err(&pdev->dev,
> + "failed to register clk notifier\n");
> + return err;
> + }
> +
> + pmc->rate = clk_get_rate(pmc->clk);
> + }
> +
> + if (!pmc->rate) {
> + if (pmc->clk)
> + dev_err(&pdev->dev, "failed to get pclk rate\n");
> +
> + pmc->rate = 100000000;
> + }
> +
> pmc->dev = &pdev->dev;
>
> tegra_pmc_init(pmc);
> @@ -2133,6 +2166,8 @@ static int tegra_pmc_probe(struct platform_device *pdev)
> cleanup_sysfs:
> device_remove_file(&pdev->dev, &dev_attr_reset_reason);
> device_remove_file(&pdev->dev, &dev_attr_reset_level);
> + clk_notifier_unregister(pmc->clk, &pmc->clk_nb);
> +
> return err;
> }
>
>
Hello Peter and Jon,
You had some comments that have been addressed, does this version look good to you? ACK?
Powered by blists - more mailing lists