| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 23 Sep 2019 09:24:56 +0000
From: Andy Tang <andy.tang@....com>
To: "edubezval@...il.com" <edubezval@...il.com>,
"rui.zhang@...el.com" <rui.zhang@...el.com>
CC: "daniel.lezcano@...aro.org" <daniel.lezcano@...aro.org>,
Leo Li <leoyang.li@....com>,
"linux-pm@...r.kernel.org" <linux-pm@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH] thermal: qoriq: add thermal monitor unit version 2
support
Hi Rui, Edubezval,
Would you please review this patch?
BR,
Andy
> -----Original Message-----
> From: Andy Tang
> Sent: 2019年8月29日 16:38
> To: 'edubezval@...il.com' <edubezval@...il.com>; 'rui.zhang@...el.com'
> <rui.zhang@...el.com>
> Cc: 'daniel.lezcano@...aro.org' <daniel.lezcano@...aro.org>; Leo Li
> <leoyang.li@....com>; 'linux-pm@...r.kernel.org'
> <linux-pm@...r.kernel.org>; 'linux-kernel@...r.kernel.org'
> <linux-kernel@...r.kernel.org>
> Subject: RE: [PATCH] thermal: qoriq: add thermal monitor unit version 2
> support
>
> Hi Rui, Edubezval,
>
> Almost three monthes passed, I have not got your comments from you.
> Could you please take a look at this patch?
>
> BR,
> Andy
>
> > -----Original Message-----
> > From: Andy Tang
> > Sent: 2019年8月6日 10:57
> > To: edubezval@...il.com; rui.zhang@...el.com
> > Cc: daniel.lezcano@...aro.org; Leo Li <leoyang.li@....com>;
> > linux-pm@...r.kernel.org; linux-kernel@...r.kernel.org
> > Subject: RE: [PATCH] thermal: qoriq: add thermal monitor unit version
> > 2 support
> >
> > Any comments?
> >
> > BR,
> > Andy
> >
> > > -----Original Message-----
> > > From: Yuantian Tang <andy.tang@....com>
> > > Sent: 2019年6月4日 10:51
> > > To: edubezval@...il.com; rui.zhang@...el.com
> > > Cc: daniel.lezcano@...aro.org; Leo Li <leoyang.li@....com>;
> > > linux-pm@...r.kernel.org; linux-kernel@...r.kernel.org; Andy Tang
> > > <andy.tang@....com>
> > > Subject: [PATCH] thermal: qoriq: add thermal monitor unit version 2
> > > support
> > >
> > > Thermal Monitor Unit v2 is introduced on new Layscape SoC.
> > > Compared to v1, TMUv2 has a little different register layout and
> > > digital output is fairly linear.
> > >
> > > Signed-off-by: Yuantian Tang <andy.tang@....com>
> > > ---
> > > drivers/thermal/qoriq_thermal.c | 122
> > > +++++++++++++++++++++++++-------
> > > 1 file changed, 98 insertions(+), 24 deletions(-)
> > >
> > > diff --git a/drivers/thermal/qoriq_thermal.c
> > > b/drivers/thermal/qoriq_thermal.c index 3b5f5b3fb1bc..0df6dfddf804
> > > 100644
> > > --- a/drivers/thermal/qoriq_thermal.c
> > > +++ b/drivers/thermal/qoriq_thermal.c
> > > @@ -13,6 +13,15 @@
> > > #include "thermal_core.h"
> > >
> > > #define SITES_MAX 16
> > > +#define TMR_DISABLE 0x0
> > > +#define TMR_ME 0x80000000
> > > +#define TMR_ALPF 0x0c000000
> > > +#define TMR_ALPF_V2 0x03000000
> > > +#define TMTMIR_DEFAULT 0x0000000f
> > > +#define TIER_DISABLE 0x0
> > > +#define TEUMR0_V2 0x51009C00
> > > +#define TMU_VER1 0x1
> > > +#define TMU_VER2 0x2
> > >
> > > /*
> > > * QorIQ TMU Registers
> > > @@ -23,17 +32,55 @@ struct qoriq_tmu_site_regs {
> > > u8 res0[0x8];
> > > };
> > >
> > > -struct qoriq_tmu_regs {
> > > +struct qoriq_tmu_regs_v2 {
> > > + u32 tmr; /* Mode Register */
> > > + u32 tsr; /* Status Register */
> > > + u32 tmsr; /* monitor site register */
> > > + u32 tmtmir; /* Temperature measurement interval Register
> */
> > > + u8 res0[0x10];
> > > + u32 tier; /* Interrupt Enable Register */
> > > + u32 tidr; /* Interrupt Detect Register */
> > > + u8 res1[0x8];
> > > + u32 tiiscr; /* interrupt immediate site capture register */
> > > + u32 tiascr; /* interrupt average site capture register */
> > > + u32 ticscr; /* Interrupt Critical Site Capture Register */
> > > + u32 res2;
> > > + u32 tmhtcr; /* monitor high temperature capture register */
> > > + u32 tmltcr; /* monitor low temperature capture register */
> > > + u32 tmrtrcr; /* monitor rising temperature rate capture register
> */
> > > + u32 tmftrcr; /* monitor falling temperature rate capture register
> */
> > > + u32 tmhtitr; /* High Temperature Immediate Threshold */
> > > + u32 tmhtatr; /* High Temperature Average Threshold */
> > > + u32 tmhtactr; /* High Temperature Average Crit Threshold */
> > > + u32 res3;
> > > + u32 tmltitr; /* monitor low temperature immediate threshold */
> > > + u32 tmltatr; /* monitor low temperature average threshold
> register */
> > > + u32 tmltactr; /* monitor low temperature average critical
> threshold */
> > > + u32 res4;
> > > + u32 tmrtrctr; /* monitor rising temperature rate critical threshold
> */
> > > + u32 tmftrctr; /* monitor falling temperature rate critical
> threshold*/
> > > + u8 res5[0x8];
> > > + u32 ttcfgr; /* Temperature Configuration Register */
> > > + u32 tscfgr; /* Sensor Configuration Register */
> > > + u8 res6[0x78];
> > > + struct qoriq_tmu_site_regs site[SITES_MAX];
> > > + u8 res7[0x9f8];
> > > + u32 ipbrr0; /* IP Block Revision Register 0 */
> > > + u32 ipbrr1; /* IP Block Revision Register 1 */
> > > + u8 res8[0x300];
> > > + u32 teumr0;
> > > + u32 teumr1;
> > > + u32 teumr2;
> > > + u32 res9;
> > > + u32 ttrcr[4]; /* Temperature Range Control Register */
> > > +};
> > > +
> > > +struct qoriq_tmu_regs_v1 {
> > > u32 tmr; /* Mode Register */
> > > -#define TMR_DISABLE 0x0
> > > -#define TMR_ME 0x80000000
> > > -#define TMR_ALPF 0x0c000000
> > > u32 tsr; /* Status Register */
> > > u32 tmtmir; /* Temperature measurement interval Register
> */
> > > -#define TMTMIR_DEFAULT 0x0000000f
> > > u8 res0[0x14];
> > > u32 tier; /* Interrupt Enable Register */
> > > -#define TIER_DISABLE 0x0
> > > u32 tidr; /* Interrupt Detect Register */
> > > u32 tiscr; /* Interrupt Site Capture Register */
> > > u32 ticscr; /* Interrupt Critical Site Capture Register */
> > > @@ -53,10 +100,7 @@ struct qoriq_tmu_regs {
> > > u32 ipbrr0; /* IP Block Revision Register 0 */
> > > u32 ipbrr1; /* IP Block Revision Register 1 */
> > > u8 res6[0x310];
> > > - u32 ttr0cr; /* Temperature Range 0 Control Register */
> > > - u32 ttr1cr; /* Temperature Range 1 Control Register */
> > > - u32 ttr2cr; /* Temperature Range 2 Control Register */
> > > - u32 ttr3cr; /* Temperature Range 3 Control Register */
> > > + u32 ttrcr[4]; /* Temperature Range Control Register */
> > > };
> > >
> > > struct qoriq_tmu_data;
> > > @@ -71,7 +115,9 @@ struct qoriq_sensor { };
> > >
> > > struct qoriq_tmu_data {
> > > - struct qoriq_tmu_regs __iomem *regs;
> > > + int ver;
> > > + struct qoriq_tmu_regs_v1 __iomem *regs;
> > > + struct qoriq_tmu_regs_v2 __iomem *regv2;
> > > bool little_endian;
> > > struct qoriq_sensor *sensor[SITES_MAX];
> > > };
> > > @@ -111,7 +157,7 @@ static const struct thermal_zone_of_device_ops
> > > tmu_tz_ops = { static int qoriq_tmu_register_tmu_zone(struct
> > > platform_device *pdev) {
> > > struct qoriq_tmu_data *qdata = platform_get_drvdata(pdev);
> > > - int id, sites = 0;
> > > + int id, sites = 0, sv2 = 0;
> > >
> > > for (id = 0; id < SITES_MAX; id++) {
> > > qdata->sensor[id] = devm_kzalloc(&pdev->dev, @@ -130,12
> > > +176,24 @@ static int qoriq_tmu_register_tmu_zone(struct
> > > +platform_device
> > > *pdev)
> > > return PTR_ERR(qdata->sensor[id]->tzd);
> > > }
> > >
> > > - sites |= 0x1 << (15 - id);
> > > + if (qdata->ver == TMU_VER1)
> > > + sites |= 0x1 << (15 - id);
> > > + else
> > > + sv2 |= 0x1 << id;
> > > }
> > >
> > > /* Enable monitoring */
> > > - if (sites != 0)
> > > - tmu_write(qdata, sites | TMR_ME | TMR_ALPF,
> > > &qdata->regs->tmr);
> > > + if (qdata->ver == TMU_VER1) {
> > > + if (sites != 0)
> > > + tmu_write(qdata, sites | TMR_ME | TMR_ALPF,
> > > + &qdata->regs->tmr);
> > > + } else {
> > > + if (sv2 != 0) {
> > > + tmu_write(qdata, sv2, &qdata->regv2->tmsr);
> > > + tmu_write(qdata, TMR_ME | TMR_ALPF_V2,
> > > + &qdata->regv2->tmr);
> > > + }
> > > + }
> > >
> > > return 0;
> > > }
> > > @@ -148,16 +206,20 @@ static int qoriq_tmu_calibration(struct
> > > platform_device *pdev)
> > > struct device_node *np = pdev->dev.of_node;
> > > struct qoriq_tmu_data *data = platform_get_drvdata(pdev);
> > >
> > > - if (of_property_read_u32_array(np, "fsl,tmu-range", range, 4)) {
> > > - dev_err(&pdev->dev, "missing calibration range.\n");
> > > - return -ENODEV;
> > > + len = of_property_count_u32_elems(np, "fsl,tmu-range");
> > > + if (len == -ENODATA || len == -EINVAL || len > 4) {
> > > + dev_err(&pdev->dev, "invalid range data.\n");
> > > + return len;
> > > }
> > >
> > > - /* Init temperature range registers */
> > > - tmu_write(data, range[0], &data->regs->ttr0cr);
> > > - tmu_write(data, range[1], &data->regs->ttr1cr);
> > > - tmu_write(data, range[2], &data->regs->ttr2cr);
> > > - tmu_write(data, range[3], &data->regs->ttr3cr);
> > > + val = of_property_read_u32_array(np, "fsl,tmu-range", range, len);
> > > + if (val != 0) {
> > > + dev_err(&pdev->dev, "invalid range data.\n");
> > > + return val;
> > > + }
> > > +
> > > + for (i = 0; i < len; i++)
> > > + tmu_write(data, range[i], &data->regs->ttrcr[i]);
> > >
> > > calibration = of_get_property(np, "fsl,tmu-calibration", &len);
> > > if (calibration == NULL || len % 8) { @@ -181,7 +243,12 @@ static
> > > void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
> > > tmu_write(data, TIER_DISABLE, &data->regs->tier);
> > >
> > > /* Set update_interval */
> > > - tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir);
> > > + if (data->ver == TMU_VER1) {
> > > + tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir);
> > > + } else {
> > > + tmu_write(data, TMTMIR_DEFAULT, &data->regv2->tmtmir);
> > > + tmu_write(data, TEUMR0_V2, &data->regv2->teumr0);
> > > + }
> > >
> > > /* Disable monitoring */
> > > tmu_write(data, TMR_DISABLE, &data->regs->tmr); @@ -190,6
> +257,7
> > @@
> > > static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
> > > static int qoriq_tmu_probe(struct platform_device *pdev) {
> > > int ret;
> > > + u32 ver;
> > > struct qoriq_tmu_data *data;
> > > struct device_node *np = pdev->dev.of_node;
> > >
> > > @@ -214,6 +282,12 @@ static int qoriq_tmu_probe(struct
> > platform_device
> > > *pdev)
> > > goto err_iomap;
> > > }
> > >
> > > + /* version register offset at: 0xbf8 on both v1 and v2 */
> > > + ver = tmu_read(data, &data->regs->ipbrr0);
> > > + data->ver = (ver >> 8) & 0xff;
> > > + if (data->ver == TMU_VER2)
> > > + data->regv2 = (void __iomem *)data->regs;
> > > +
> > > qoriq_tmu_init_device(data); /* TMU initialization */
> > >
> > > ret = qoriq_tmu_calibration(pdev); /* TMU calibration */
> > > --
> > > 2.17.1
Powered by blists - more mailing lists