| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190923154956.6868-1-krzk@kernel.org>
Date: Mon, 23 Sep 2019 17:49:56 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Felipe Balbi <balbi@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Johan Hovold <johan@...nel.org>,
Jiri Kosina <trivial@...nel.org>, linux-usb@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzk@...nel.org>
Subject: [PATCH trivial] usb: Fix Kconfig indentation
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
---
drivers/usb/dwc3/Kconfig | 4 +-
drivers/usb/gadget/legacy/Kconfig | 20 ++++-----
drivers/usb/gadget/udc/Kconfig | 2 +-
drivers/usb/host/Kconfig | 68 +++++++++++++++---------------
drivers/usb/misc/Kconfig | 8 ++--
drivers/usb/misc/sisusbvga/Kconfig | 2 +-
drivers/usb/serial/Kconfig | 44 +++++++++----------
7 files changed, 74 insertions(+), 74 deletions(-)
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 89abc6078703..cc431376fcd0 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -103,7 +103,7 @@ config USB_DWC3_MESON_G12A
default USB_DWC3
select USB_ROLE_SWITCH
help
- Support USB2/3 functionality in Amlogic G12A platforms.
+ Support USB2/3 functionality in Amlogic G12A platforms.
Say 'Y' or 'M' if you have one such device.
config USB_DWC3_OF_SIMPLE
@@ -111,7 +111,7 @@ config USB_DWC3_OF_SIMPLE
depends on OF && COMMON_CLK
default USB_DWC3
help
- Support USB2/3 functionality in simple SoC integrations.
+ Support USB2/3 functionality in simple SoC integrations.
Currently supports Xilinx and Qualcomm DWC USB3 IP.
Say 'Y' or 'M' if you have one such device.
diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig
index 69ff7f8c86f5..38eaa9417b38 100644
--- a/drivers/usb/gadget/legacy/Kconfig
+++ b/drivers/usb/gadget/legacy/Kconfig
@@ -154,16 +154,16 @@ config USB_ETH_EEM
select USB_LIBCOMPOSITE
select USB_F_EEM
help
- CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
- and therefore can be supported by more hardware. Technically ECM and
- EEM are designed for different applications. The ECM model extends
- the network interface to the target (e.g. a USB cable modem), and the
- EEM model is for mobile devices to communicate with hosts using
- ethernet over USB. For Linux gadgets, however, the interface with
- the host is the same (a usbX device), so the differences are minimal.
-
- If you say "y" here, the Ethernet gadget driver will use the EEM
- protocol rather than ECM. If unsure, say "n".
+ CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
+ and therefore can be supported by more hardware. Technically ECM and
+ EEM are designed for different applications. The ECM model extends
+ the network interface to the target (e.g. a USB cable modem), and the
+ EEM model is for mobile devices to communicate with hosts using
+ ethernet over USB. For Linux gadgets, however, the interface with
+ the host is the same (a usbX device), so the differences are minimal.
+
+ If you say "y" here, the Ethernet gadget driver will use the EEM
+ protocol rather than ECM. If unsure, say "n".
config USB_G_NCM
tristate "Network Control Model (NCM) support"
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index d7e611645533..485c92ef888a 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -123,7 +123,7 @@ config USB_GR_UDC
tristate "Aeroflex Gaisler GRUSBDC USB Peripheral Controller Driver"
depends on HAS_DMA
help
- Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB
+ Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB
VHDL IP core library.
config USB_OMAP
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 79b2e79dddd0..d6164ede63d3 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -220,12 +220,12 @@ config USB_EHCI_HCD_ORION
Marvell PXA/MMP USB controller" for those.
config USB_EHCI_HCD_SPEAR
- tristate "Support for ST SPEAr on-chip EHCI USB controller"
- depends on USB_EHCI_HCD && PLAT_SPEAR
- default y
- ---help---
- Enables support for the on-chip EHCI controller on
- ST SPEAr chips.
+ tristate "Support for ST SPEAr on-chip EHCI USB controller"
+ depends on USB_EHCI_HCD && PLAT_SPEAR
+ default y
+ ---help---
+ Enables support for the on-chip EHCI controller on
+ ST SPEAr chips.
config USB_EHCI_HCD_STI
tristate "Support for ST STiHxxx on-chip EHCI USB controller"
@@ -237,12 +237,12 @@ config USB_EHCI_HCD_STI
STMicroelectronics consumer electronics SoC's.
config USB_EHCI_HCD_AT91
- tristate "Support for Atmel on-chip EHCI USB controller"
- depends on USB_EHCI_HCD && ARCH_AT91
- default y
- ---help---
- Enables support for the on-chip EHCI controller on
- Atmel chips.
+ tristate "Support for Atmel on-chip EHCI USB controller"
+ depends on USB_EHCI_HCD && ARCH_AT91
+ default y
+ ---help---
+ Enables support for the on-chip EHCI controller on
+ Atmel chips.
config USB_EHCI_TEGRA
tristate "NVIDIA Tegra HCD support"
@@ -250,8 +250,8 @@ config USB_EHCI_TEGRA
select USB_EHCI_ROOT_HUB_TT
select USB_TEGRA_PHY
help
- This driver enables support for the internal USB Host Controllers
- found in NVIDIA Tegra SoCs. The controllers are EHCI compliant.
+ This driver enables support for the internal USB Host Controllers
+ found in NVIDIA Tegra SoCs. The controllers are EHCI compliant.
config USB_EHCI_HCD_PPC_OF
bool "EHCI support for PPC USB controller on OF platform bus"
@@ -409,12 +409,12 @@ config USB_OHCI_HCD_OMAP1
Enables support for the OHCI controller on OMAP1/2 chips.
config USB_OHCI_HCD_SPEAR
- tristate "Support for ST SPEAr on-chip OHCI USB controller"
- depends on USB_OHCI_HCD && PLAT_SPEAR
- default y
- ---help---
- Enables support for the on-chip OHCI controller on
- ST SPEAr chips.
+ tristate "Support for ST SPEAr on-chip OHCI USB controller"
+ depends on USB_OHCI_HCD && PLAT_SPEAR
+ default y
+ ---help---
+ Enables support for the on-chip OHCI controller on
+ ST SPEAr chips.
config USB_OHCI_HCD_STI
tristate "Support for ST STiHxxx on-chip OHCI USB controller"
@@ -426,12 +426,12 @@ config USB_OHCI_HCD_STI
STMicroelectronics consumer electronics SoC's.
config USB_OHCI_HCD_S3C2410
- tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series"
- depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX)
- default y
- ---help---
- Enables support for the on-chip OHCI controller on
- S3C24xx/S3C64xx chips.
+ tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series"
+ depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX)
+ default y
+ ---help---
+ Enables support for the on-chip OHCI controller on
+ S3C24xx/S3C64xx chips.
config USB_OHCI_HCD_LPC32XX
tristate "Support for LPC on-chip OHCI USB controller"
@@ -440,8 +440,8 @@ config USB_OHCI_HCD_LPC32XX
depends on USB_ISP1301
default y
---help---
- Enables support for the on-chip OHCI controller on
- NXP chips.
+ Enables support for the on-chip OHCI controller on
+ NXP chips.
config USB_OHCI_HCD_PXA27X
tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
@@ -456,8 +456,8 @@ config USB_OHCI_HCD_AT91
depends on USB_OHCI_HCD && ARCH_AT91 && OF
default y
---help---
- Enables support for the on-chip OHCI controller on
- Atmel chips.
+ Enables support for the on-chip OHCI controller on
+ Atmel chips.
config USB_OHCI_HCD_OMAP3
tristate "OHCI support for OMAP3 and later chips"
@@ -716,11 +716,11 @@ config USB_IMX21_HCD
tristate "i.MX21 HCD support"
depends on ARM && ARCH_MXC
help
- This driver enables support for the on-chip USB host in the
- i.MX21 processor.
+ This driver enables support for the on-chip USB host in the
+ i.MX21 processor.
- To compile this driver as a module, choose M here: the
- module will be called "imx21-hcd".
+ To compile this driver as a module, choose M here: the
+ module will be called "imx21-hcd".
config USB_HCD_BCMA
tristate "BCMA usb host driver"
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index bdae62b2ffe0..664d27bb6086 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -191,8 +191,8 @@ config USB_TEST
including sample test device firmware and "how to use it".
config USB_EHSET_TEST_FIXTURE
- tristate "USB EHSET Test Fixture driver"
- help
+ tristate "USB EHSET Test Fixture driver"
+ help
Say Y here if you want to support the special test fixture device
used for the USB-IF Embedded Host High-Speed Electrical Test procedure.
@@ -247,13 +247,13 @@ config USB_HSIC_USB3503
depends on I2C
select REGMAP_I2C
help
- This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver.
+ This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver.
config USB_HSIC_USB4604
tristate "USB4604 HSIC to USB20 Driver"
depends on I2C
help
- This option enables support for SMSC USB4604 HSIC to USB 2.0 Driver.
+ This option enables support for SMSC USB4604 HSIC to USB 2.0 Driver.
config USB_LINK_LAYER_TEST
tristate "USB Link Layer Test driver"
diff --git a/drivers/usb/misc/sisusbvga/Kconfig b/drivers/usb/misc/sisusbvga/Kconfig
index 9b632ab24f03..c16121276a21 100644
--- a/drivers/usb/misc/sisusbvga/Kconfig
+++ b/drivers/usb/misc/sisusbvga/Kconfig
@@ -4,7 +4,7 @@ config USB_SISUSBVGA
tristate "USB 2.0 SVGA dongle support (Net2280/SiS315)"
depends on (USB_MUSB_HDRC || USB_EHCI_HCD)
select FONT_SUPPORT if USB_SISUSBVGA_CON
- ---help---
+ ---help---
Say Y here if you intend to attach a USB2VGA dongle based on a
Net2280 and a SiS315 chip.
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 67279c6bce33..0a8c16a8cda2 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -271,17 +271,17 @@ config USB_SERIAL_F8153X
config USB_SERIAL_GARMIN
tristate "USB Garmin GPS driver"
help
- Say Y here if you want to connect to your Garmin GPS.
- Should work with most Garmin GPS devices which have a native USB port.
+ Say Y here if you want to connect to your Garmin GPS.
+ Should work with most Garmin GPS devices which have a native USB port.
- See <http://sourceforge.net/projects/garmin-gps> for the latest
- version of the driver.
+ See <http://sourceforge.net/projects/garmin-gps> for the latest
+ version of the driver.
- To compile this driver as a module, choose M here: the
- module will be called garmin_gps.
+ To compile this driver as a module, choose M here: the
+ module will be called garmin_gps.
config USB_SERIAL_IPW
- tristate "USB IPWireless (3G UMTS TDD) Driver"
+ tristate "USB IPWireless (3G UMTS TDD) Driver"
select USB_SERIAL_WWAN
help
Say Y here if you want to use a IPWireless USB modem such as
@@ -341,20 +341,20 @@ config USB_SERIAL_KLSI
module will be called kl5kusb105.
config USB_SERIAL_KOBIL_SCT
- tristate "USB KOBIL chipcard reader"
- ---help---
- Say Y here if you want to use one of the following KOBIL USB chipcard
- readers:
-
- - USB TWIN
- - KAAN Standard Plus
- - KAAN SIM
- - SecOVID Reader Plus
- - B1 Professional
- - KAAN Professional
-
- Note that you need a current CT-API.
- To compile this driver as a module, choose M here: the
+ tristate "USB KOBIL chipcard reader"
+ ---help---
+ Say Y here if you want to use one of the following KOBIL USB chipcard
+ readers:
+
+ - USB TWIN
+ - KAAN Standard Plus
+ - KAAN SIM
+ - SecOVID Reader Plus
+ - B1 Professional
+ - KAAN Professional
+
+ Note that you need a current CT-API.
+ To compile this driver as a module, choose M here: the
module will be called kobil_sct.
config USB_SERIAL_MCT_U232
@@ -458,7 +458,7 @@ config USB_SERIAL_OTI6858
tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
help
Say Y here if you want to use the OTi-6858 single port USB to serial
- converter device.
+ converter device.
To compile this driver as a module, choose M here: the
module will be called oti6858.
--
2.17.1
Powered by blists - more mailing lists