| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <c063774f-9397-31ae-4ca8-24d50114296e@ti.com>
Date: Mon, 23 Sep 2019 12:56:59 -0500
From: Dan Murphy <dmurphy@...com>
To: Jacek Anaszewski <jacek.anaszewski@...il.com>, <pavel@....cz>
CC: <linux-leds@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v8 8/9] leds: lp50xx: Add the LP50XX family of the RGB LED
driver
Jacek
On 9/21/19 10:11 AM, Jacek Anaszewski wrote:
> Dan,
>
> On 9/20/19 7:41 PM, Dan Murphy wrote:
>> Introduce the LP5036/30/24/18/12/9 RGB LED driver.
>> The difference in these parts are the number of
>> LED outputs where the:
>>
>> LP5036 can control 36 LEDs
>> LP5030 can control 30 LEDs
>> LP5024 can control 24 LEDs
>> LP5018 can control 18 LEDs
>> LP5012 can control 12 LEDs
>> LP509 can control 9 LEDs
>>
>> The device has the ability to group LED output into control banks
>> so that multiple LED banks can be controlled with the same mixing and
>> brightness. Inversely the LEDs can also be controlled independently.
>>
>> Signed-off-by: Dan Murphy<dmurphy@...com>
>> ---
>> drivers/leds/Kconfig | 7 +
>> drivers/leds/Makefile | 1 +
>> drivers/leds/leds-lp50xx.c | 785 +++++++++++++++++++++++++++++++++++++
>> 3 files changed, 793 insertions(+)
>> create mode 100644 drivers/leds/leds-lp50xx.c
>>
>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
>> index cfb1ebb6517f..1c0cacb100e6 100644
>> --- a/drivers/leds/Kconfig
>> +++ b/drivers/leds/Kconfig
>> @@ -363,6 +363,13 @@ config LEDS_LP3952
>> To compile this driver as a module, choose M here: the
>> module will be called leds-lp3952.
>>
>> +config LEDS_LP50XX
>> + tristate "LED Support for TI LP5036/30/24/18 LED driver chip"
>> + depends on LEDS_CLASS && REGMAP_I2C
> && OF
Not sure why I would add that since we are using fw_node calls not
of_property calls.
The fw_node calls are built in as default kernel so these should always
be available.
Unless this is a led_class has a dependency
>> + help
>> + If you say yes here you get support for the Texas Instruments
>> + LP5036, LP5030, LP5024 and LP5018 LED driver.
> Please add also this standard sentence for a module.
Ack
>> +
>> config LEDS_LP55XX_COMMON
>> tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501"
>> depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 || LEDS_LP8501
>> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
>> index 841038cfe35b..7a208a0f7b84 100644
>> --- a/drivers/leds/Makefile
>> +++ b/drivers/leds/Makefile
>> @@ -34,6 +34,7 @@ obj-$(CONFIG_LEDS_GPIO_REGISTER) += leds-gpio-register.o
>> obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
>> obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o
>> obj-$(CONFIG_LEDS_LP3952) += leds-lp3952.o
>> +obj-$(CONFIG_LEDS_LP50XX) += leds-lp50xx.o
>> obj-$(CONFIG_LEDS_LP55XX_COMMON) += leds-lp55xx-common.o
>> obj-$(CONFIG_LEDS_LP5521) += leds-lp5521.o
>> obj-$(CONFIG_LEDS_LP5523) += leds-lp5523.o
>> diff --git a/drivers/leds/leds-lp50xx.c b/drivers/leds/leds-lp50xx.c
>> new file mode 100644
>> index 000000000000..3ddc14f53eae
>> --- /dev/null
>> +++ b/drivers/leds/leds-lp50xx.c
>> @@ -0,0 +1,785 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +// TI LP50XX LED chip family driver
>> +// Copyright (C) 2018 Texas Instruments Incorporated -http://www.ti.com/
>> +
>> +#include <linux/gpio/consumer.h>
>> +#include <linux/i2c.h>
>> +#include <linux/init.h>
>> +#include <linux/leds.h>
>> +#include <linux/module.h>
>> +#include <linux/mutex.h>
>> +#include <linux/of.h>
>> +#include <linux/of_gpio.h>
>> +#include <linux/regmap.h>
>> +#include <linux/regulator/consumer.h>
>> +#include <linux/slab.h>
>> +#include <uapi/linux/uleds.h>
>> +
>> +#include <linux/led-class-multicolor.h>
>> +
>> +#define LP50XX_DEV_CFG0 0x00
>> +#define LP50XX_DEV_CFG1 0x01
>> +#define LP50XX_LED_CFG0 0x02
>> +
>> +/* LP5009 and LP5012 registers */
>> +#define LP5012_BNK_BRT 0x03
>> +#define LP5012_BNKA_CLR 0x04
>> +#define LP5012_BNKB_CLR 0x05
>> +#define LP5012_BNKC_CLR 0x06
>> +#define LP5012_LED0_BRT 0x07
>> +#define LP5012_LED1_BRT 0x08
>> +#define LP5012_LED2_BRT 0x09
>> +#define LP5012_LED3_BRT 0x0a
>> +#define LP5012_OUT0_CLR 0x0b
>> +#define LP5012_OUT1_CLR 0x0c
>> +#define LP5012_OUT2_CLR 0x0d
>> +#define LP5012_OUT3_CLR 0x0e
>> +#define LP5012_OUT4_CLR 0x0f
>> +#define LP5012_OUT5_CLR 0x10
>> +#define LP5012_OUT6_CLR 0x11
>> +#define LP5012_OUT7_CLR 0x12
>> +#define LP5012_OUT8_CLR 0x13
>> +#define LP5012_OUT9_CLR 0x14
>> +#define LP5012_OUT10_CLR 0x15
>> +#define LP5012_OUT11_CLR 0x16
>> +#define LP5012_RESET 0x17
>> +
>> +/* LP5018 and LP5024 registers */
>> +#define LP5024_BNK_BRT 0x03
>> +#define LP5024_BNKA_CLR 0x04
>> +#define LP5024_BNKB_CLR 0x05
>> +#define LP5024_BNKC_CLR 0x06
>> +#define LP5024_LED0_BRT 0x07
>> +#define LP5024_LED1_BRT 0x08
>> +#define LP5024_LED2_BRT 0x09
>> +#define LP5024_LED3_BRT 0x0a
>> +#define LP5024_LED4_BRT 0x0b
>> +#define LP5024_LED5_BRT 0x0c
>> +#define LP5024_LED6_BRT 0x0d
>> +#define LP5024_LED7_BRT 0x0e
>> +
>> +#define LP5024_OUT0_CLR 0x0f
>> +#define LP5024_OUT1_CLR 0x10
>> +#define LP5024_OUT2_CLR 0x11
>> +#define LP5024_OUT3_CLR 0x12
>> +#define LP5024_OUT4_CLR 0x13
>> +#define LP5024_OUT5_CLR 0x14
>> +#define LP5024_OUT6_CLR 0x15
>> +#define LP5024_OUT7_CLR 0x16
>> +#define LP5024_OUT8_CLR 0x17
>> +#define LP5024_OUT9_CLR 0x18
>> +#define LP5024_OUT10_CLR 0x19
>> +#define LP5024_OUT11_CLR 0x1a
>> +#define LP5024_OUT12_CLR 0x1b
>> +#define LP5024_OUT13_CLR 0x1c
>> +#define LP5024_OUT14_CLR 0x1d
>> +#define LP5024_OUT15_CLR 0x1e
>> +#define LP5024_OUT16_CLR 0x1f
>> +#define LP5024_OUT17_CLR 0x20
>> +#define LP5024_OUT18_CLR 0x21
>> +#define LP5024_OUT19_CLR 0x22
>> +#define LP5024_OUT20_CLR 0x23
>> +#define LP5024_OUT21_CLR 0x24
>> +#define LP5024_OUT22_CLR 0x25
>> +#define LP5024_OUT23_CLR 0x26
>> +#define LP5024_RESET 0x27
>> +
>> +/* LP5030 and LP5036 registers */
>> +#define LP5036_LED_CFG1 0x03
>> +#define LP5036_BNK_BRT 0x04
>> +#define LP5036_BNKA_CLR 0x05
>> +#define LP5036_BNKB_CLR 0x06
>> +#define LP5036_BNKC_CLR 0x07
>> +#define LP5036_LED0_BRT 0x08
>> +#define LP5036_LED1_BRT 0x09
>> +#define LP5036_LED2_BRT 0x0a
>> +#define LP5036_LED3_BRT 0x0b
>> +#define LP5036_LED4_BRT 0x0c
>> +#define LP5036_LED5_BRT 0x0d
>> +#define LP5036_LED6_BRT 0x0e
>> +#define LP5036_LED7_BRT 0x0f
>> +#define LP5036_LED8_BRT 0x10
>> +#define LP5036_LED9_BRT 0x11
>> +#define LP5036_LED10_BRT 0x12
>> +#define LP5036_LED11_BRT 0x13
>> +
>> +#define LP5036_OUT0_CLR 0x14
>> +#define LP5036_OUT1_CLR 0x15
>> +#define LP5036_OUT2_CLR 0x16
>> +#define LP5036_OUT3_CLR 0x17
>> +#define LP5036_OUT4_CLR 0x18
>> +#define LP5036_OUT5_CLR 0x19
>> +#define LP5036_OUT6_CLR 0x1a
>> +#define LP5036_OUT7_CLR 0x1b
>> +#define LP5036_OUT8_CLR 0x1c
>> +#define LP5036_OUT9_CLR 0x1d
>> +#define LP5036_OUT10_CLR 0x1e
>> +#define LP5036_OUT11_CLR 0x1f
>> +#define LP5036_OUT12_CLR 0x20
>> +#define LP5036_OUT13_CLR 0x21
>> +#define LP5036_OUT14_CLR 0x22
>> +#define LP5036_OUT15_CLR 0x23
>> +#define LP5036_OUT16_CLR 0x24
>> +#define LP5036_OUT17_CLR 0x25
>> +#define LP5036_OUT18_CLR 0x26
>> +#define LP5036_OUT19_CLR 0x27
>> +#define LP5036_OUT20_CLR 0x28
>> +#define LP5036_OUT21_CLR 0x29
>> +#define LP5036_OUT22_CLR 0x2a
>> +#define LP5036_OUT23_CLR 0x2b
>> +#define LP5036_OUT24_CLR 0x2c
>> +#define LP5036_OUT25_CLR 0x2d
>> +#define LP5036_OUT26_CLR 0x2e
>> +#define LP5036_OUT27_CLR 0x2f
>> +#define LP5036_OUT28_CLR 0x30
>> +#define LP5036_OUT29_CLR 0x31
>> +#define LP5036_OUT30_CLR 0x32
>> +#define LP5036_OUT31_CLR 0x33
>> +#define LP5036_OUT32_CLR 0x34
>> +#define LP5036_OUT33_CLR 0x35
>> +#define LP5036_OUT34_CLR 0x36
>> +#define LP5036_OUT35_CLR 0x37
>> +#define LP5036_RESET 0x38
>> +
>> +#define LP50XX_SW_RESET 0xff
>> +#define LP50XX_CHIP_EN BIT(6)
>> +
>> +#define LP5009_MAX_LED_MODULES 2
>> +#define LP5012_MAX_LED_MODULES 4
>> +#define LP5018_MAX_LED_MODULES 6
>> +#define LP5024_MAX_LED_MODULES 8
>> +#define LP5030_MAX_LED_MODULES 10
>> +#define LP5036_MAX_LED_MODULES 12
>> +
>> +struct lp50xx_led {
>> + struct led_classdev led_dev;
>> + struct led_classdev_mc mc_cdev;
>> + struct lp50xx *priv;
>> + unsigned long bank_modules;
>> + int led_intensity[LED_COLOR_ID_MAX];
> This is waste of memory. There should be only three elements.
Ack
>> + u8 ctrl_bank_enabled;
>> + int led_number;
>> +};
>> +
>> +/**
>> + * struct lp50xx -
>> + * @enable_gpio: Hardware enable gpio
>> + * @regulator: LED supply regulator pointer
>> + * @client: Pointer to the I2C client
>> + * @regmap: Devices register map
> Device or Device's ?
device
>
>> + * @dev: Pointer to the devices device struct
>> + * @lock: Lock for reading/writing the device
>> + * @chip_info: chip specific information (ie num_leds)
>> + * @num_of_banked_leds: holds the number of banked LEDs
>> + * @leds: Array of LED strings
>> + */
>> +struct lp50xx {
>> + struct gpio_desc *enable_gpio;
>> + struct regulator *regulator;
>> + struct i2c_client *client;
>> + struct regmap *regmap;
>> + struct device *dev;
>> + struct mutex lock;
>> + const struct lp50xx_chip_info *chip_info;
>> + int num_of_banked_leds;
>> +
>> + /* This needs to be at the end of the struct */
>> + struct lp50xx_led leds[];
>> +};
>> +
>> +static const struct reg_default lp5012_reg_defs[] = {
>> + {LP50XX_DEV_CFG0, 0x0},
>> + {LP50XX_DEV_CFG1, 0x3c},
>> + {LP50XX_LED_CFG0, 0x0},
>> + {LP5012_BNK_BRT, 0xff},
>> + {LP5012_BNKA_CLR, 0x0f},
>> + {LP5012_BNKB_CLR, 0x0f},
>> + {LP5012_BNKC_CLR, 0x0f},
>> + {LP5012_LED0_BRT, 0x0f},
>> + {LP5012_LED1_BRT, 0xff},
>> + {LP5012_LED2_BRT, 0xff},
>> + {LP5012_LED3_BRT, 0xff},
>> + {LP5012_OUT0_CLR, 0x0f},
>> + {LP5012_OUT1_CLR, 0x00},
>> + {LP5012_OUT2_CLR, 0x00},
>> + {LP5012_OUT3_CLR, 0x00},
>> + {LP5012_OUT4_CLR, 0x00},
>> + {LP5012_OUT5_CLR, 0x00},
>> + {LP5012_OUT6_CLR, 0x00},
>> + {LP5012_OUT7_CLR, 0x00},
>> + {LP5012_OUT8_CLR, 0x00},
>> + {LP5012_OUT9_CLR, 0x00},
>> + {LP5012_OUT10_CLR, 0x00},
>> + {LP5012_OUT11_CLR, 0x00},
>> + {LP5012_RESET, 0x00}
>> +};
>> +
>> +static const struct reg_default lp5024_reg_defs[] = {
>> + {LP50XX_DEV_CFG0, 0x0},
>> + {LP50XX_DEV_CFG1, 0x3c},
>> + {LP50XX_LED_CFG0, 0x0},
>> + {LP5024_BNK_BRT, 0xff},
>> + {LP5024_BNKA_CLR, 0x0f},
>> + {LP5024_BNKB_CLR, 0x0f},
>> + {LP5024_BNKC_CLR, 0x0f},
>> + {LP5024_LED0_BRT, 0x0f},
>> + {LP5024_LED1_BRT, 0xff},
>> + {LP5024_LED2_BRT, 0xff},
>> + {LP5024_LED3_BRT, 0xff},
>> + {LP5024_LED4_BRT, 0xff},
>> + {LP5024_LED5_BRT, 0xff},
>> + {LP5024_LED6_BRT, 0xff},
>> + {LP5024_LED7_BRT, 0xff},
>> + {LP5024_OUT0_CLR, 0x0f},
>> + {LP5024_OUT1_CLR, 0x00},
>> + {LP5024_OUT2_CLR, 0x00},
>> + {LP5024_OUT3_CLR, 0x00},
>> + {LP5024_OUT4_CLR, 0x00},
>> + {LP5024_OUT5_CLR, 0x00},
>> + {LP5024_OUT6_CLR, 0x00},
>> + {LP5024_OUT7_CLR, 0x00},
>> + {LP5024_OUT8_CLR, 0x00},
>> + {LP5024_OUT9_CLR, 0x00},
>> + {LP5024_OUT10_CLR, 0x00},
>> + {LP5024_OUT11_CLR, 0x00},
>> + {LP5024_OUT12_CLR, 0x00},
>> + {LP5024_OUT13_CLR, 0x00},
>> + {LP5024_OUT14_CLR, 0x00},
>> + {LP5024_OUT15_CLR, 0x00},
>> + {LP5024_OUT16_CLR, 0x00},
>> + {LP5024_OUT17_CLR, 0x00},
>> + {LP5024_OUT18_CLR, 0x00},
>> + {LP5024_OUT19_CLR, 0x00},
>> + {LP5024_OUT20_CLR, 0x00},
>> + {LP5024_OUT21_CLR, 0x00},
>> + {LP5024_OUT22_CLR, 0x00},
>> + {LP5024_OUT23_CLR, 0x00},
>> + {LP5024_RESET, 0x00}
>> +};
>> +
>> +static const struct reg_default lp5036_reg_defs[] = {
>> + {LP50XX_DEV_CFG0, 0x0},
>> + {LP50XX_DEV_CFG1, 0x3c},
>> + {LP50XX_LED_CFG0, 0x0},
>> + {LP5036_LED_CFG1, 0x0},
>> + {LP5036_BNK_BRT, 0xff},
>> + {LP5036_BNKA_CLR, 0x0f},
>> + {LP5036_BNKB_CLR, 0x0f},
>> + {LP5036_BNKC_CLR, 0x0f},
>> + {LP5036_LED0_BRT, 0x0f},
>> + {LP5036_LED1_BRT, 0xff},
>> + {LP5036_LED2_BRT, 0xff},
>> + {LP5036_LED3_BRT, 0xff},
>> + {LP5036_LED4_BRT, 0xff},
>> + {LP5036_LED5_BRT, 0xff},
>> + {LP5036_LED6_BRT, 0xff},
>> + {LP5036_LED7_BRT, 0xff},
>> + {LP5036_OUT0_CLR, 0x0f},
>> + {LP5036_OUT1_CLR, 0x00},
>> + {LP5036_OUT2_CLR, 0x00},
>> + {LP5036_OUT3_CLR, 0x00},
>> + {LP5036_OUT4_CLR, 0x00},
>> + {LP5036_OUT5_CLR, 0x00},
>> + {LP5036_OUT6_CLR, 0x00},
>> + {LP5036_OUT7_CLR, 0x00},
>> + {LP5036_OUT8_CLR, 0x00},
>> + {LP5036_OUT9_CLR, 0x00},
>> + {LP5036_OUT10_CLR, 0x00},
>> + {LP5036_OUT11_CLR, 0x00},
>> + {LP5036_OUT12_CLR, 0x00},
>> + {LP5036_OUT13_CLR, 0x00},
>> + {LP5036_OUT14_CLR, 0x00},
>> + {LP5036_OUT15_CLR, 0x00},
>> + {LP5036_OUT16_CLR, 0x00},
>> + {LP5036_OUT17_CLR, 0x00},
>> + {LP5036_OUT18_CLR, 0x00},
>> + {LP5036_OUT19_CLR, 0x00},
>> + {LP5036_OUT20_CLR, 0x00},
>> + {LP5036_OUT21_CLR, 0x00},
>> + {LP5036_OUT22_CLR, 0x00},
>> + {LP5036_OUT23_CLR, 0x00},
>> + {LP5036_OUT24_CLR, 0x00},
>> + {LP5036_OUT25_CLR, 0x00},
>> + {LP5036_OUT26_CLR, 0x00},
>> + {LP5036_OUT27_CLR, 0x00},
>> + {LP5036_OUT28_CLR, 0x00},
>> + {LP5036_OUT29_CLR, 0x00},
>> + {LP5036_OUT30_CLR, 0x00},
>> + {LP5036_OUT31_CLR, 0x00},
>> + {LP5036_OUT32_CLR, 0x00},
>> + {LP5036_OUT33_CLR, 0x00},
>> + {LP5036_OUT34_CLR, 0x00},
>> + {LP5036_OUT35_CLR, 0x00},
>> + {LP5036_RESET, 0x00}
>> +};
>> +
>> +static const struct regmap_config lp5012_regmap_config = {
>> + .reg_bits = 8,
>> + .val_bits = 8,
>> +
>> + .max_register = LP5012_RESET,
>> + .reg_defaults = lp5012_reg_defs,
>> + .num_reg_defaults = ARRAY_SIZE(lp5012_reg_defs),
>> + .cache_type = REGCACHE_RBTREE,
>> +};
>> +
>> +static const struct regmap_config lp5024_regmap_config = {
>> + .reg_bits = 8,
>> + .val_bits = 8,
>> +
>> + .max_register = LP5024_RESET,
>> + .reg_defaults = lp5024_reg_defs,
>> + .num_reg_defaults = ARRAY_SIZE(lp5024_reg_defs),
>> + .cache_type = REGCACHE_RBTREE,
>> +};
>> +
>> +static const struct regmap_config lp5036_regmap_config = {
>> + .reg_bits = 8,
>> + .val_bits = 8,
>> +
>> + .max_register = LP5036_RESET,
>> + .reg_defaults = lp5036_reg_defs,
>> + .num_reg_defaults = ARRAY_SIZE(lp5036_reg_defs),
>> + .cache_type = REGCACHE_RBTREE,
>> +};
>> +
>> +enum lp50xx_model {
>> + LP5009,
>> + LP5012,
>> + LP5018,
>> + LP5024,
>> + LP5030,
>> + LP5036,
>> +};
>> +
>> +/*
>> + * struct lp50xx_chip_info -
>> + * @num_leds: number of LED outputs available on the device
>> + * @led_brightness0_reg: first brightness register of the device
>> + * @mix_out0_reg: first color mix register of the device
>> + * @bank_brt_reg: bank brightness register
>> + * @bank_mix_reg: color mix register
>> + * @reset_reg: devices reset register
> s/devices/device/
>
> Please be consequent: I prefer starting the property description
> always with lower case.
Ack
>> + */
>> +struct lp50xx_chip_info {
>> + struct regmap_config lp50xx_regmap_config;
>> + u8 num_leds;
>> + u8 led_brightness0_reg;
>> + u8 mix_out0_reg;
>> + u8 bank_brt_reg;
>> + u8 bank_mix_reg;
>> + u8 reset_reg;
>> +};
>> +
>> +static const struct lp50xx_chip_info lp50xx_chip_info_tbl[] = {
>> + [LP5009] = {
>> + .num_leds = LP5009_MAX_LED_MODULES,
>> + .led_brightness0_reg = LP5012_LED0_BRT,
>> + .mix_out0_reg = LP5012_OUT0_CLR,
>> + .bank_brt_reg = LP5012_BNK_BRT,
>> + .bank_mix_reg = LP5012_BNKA_CLR,
>> + .reset_reg = LP5012_RESET,
>> + .lp50xx_regmap_config = lp5012_regmap_config,
>> + },
>> + [LP5012] = {
>> + .num_leds = LP5012_MAX_LED_MODULES,
>> + .led_brightness0_reg = LP5012_LED0_BRT,
>> + .mix_out0_reg = LP5012_OUT0_CLR,
>> + .bank_brt_reg = LP5012_BNK_BRT,
>> + .bank_mix_reg = LP5012_BNKA_CLR,
>> + .reset_reg = LP5012_RESET,
>> + .lp50xx_regmap_config = lp5012_regmap_config,
>> + },
>> + [LP5018] = {
>> + .num_leds = LP5018_MAX_LED_MODULES,
>> + .led_brightness0_reg = LP5024_LED0_BRT,
>> + .mix_out0_reg = LP5024_OUT0_CLR,
>> + .bank_brt_reg = LP5024_BNK_BRT,
>> + .bank_mix_reg = LP5024_BNKA_CLR,
>> + .reset_reg = LP5024_RESET,
>> + .lp50xx_regmap_config = lp5024_regmap_config,
>> + },
>> + [LP5024] = {
>> + .num_leds = LP5024_MAX_LED_MODULES,
>> + .led_brightness0_reg = LP5024_LED0_BRT,
>> + .mix_out0_reg = LP5024_OUT0_CLR,
>> + .bank_brt_reg = LP5024_BNK_BRT,
>> + .bank_mix_reg = LP5024_BNKA_CLR,
>> + .reset_reg = LP5024_RESET,
>> + .lp50xx_regmap_config = lp5024_regmap_config,
>> + },
>> + [LP5030] = {
>> + .num_leds = LP5030_MAX_LED_MODULES,
>> + .led_brightness0_reg = LP5036_LED0_BRT,
>> + .mix_out0_reg = LP5036_OUT0_CLR,
>> + .bank_brt_reg = LP5036_BNK_BRT,
>> + .bank_mix_reg = LP5036_BNKA_CLR,
>> + .reset_reg = LP5036_RESET,
>> + .lp50xx_regmap_config = lp5036_regmap_config,
>> + },
>> + [LP5036] = {
>> + .num_leds = LP5036_MAX_LED_MODULES,
>> + .led_brightness0_reg = LP5036_LED0_BRT,
>> + .mix_out0_reg = LP5036_OUT0_CLR,
>> + .bank_brt_reg = LP5036_BNK_BRT,
>> + .bank_mix_reg = LP5036_BNKA_CLR,
>> + .reset_reg = LP5036_RESET,
>> + .lp50xx_regmap_config = lp5036_regmap_config,
>> + },
>> +};
>> +
>> +static struct lp50xx_led *mcled_cdev_to_led(struct led_classdev_mc *mcled_cdev)
>> +{
>> + return container_of(mcled_cdev, struct lp50xx_led, mc_cdev);
>> +}
>> +
>> +static int lp50xx_set_intensity(struct lp50xx_led *led)
>> +{
>> + struct lp50xx *priv = led->priv;
>> + u8 led_offset, reg_number, reg_color_off;
> reg_color_off feels like "turning the color off"
>
> Let's have full reg_color_offset form.
I will ack this for brightness set as this function will disappear in v9
>
>> + int i, ret = -EINVAL;
>> +
>> + for (i = 0; i <= LED_COLOR_ID_MAX; i++) {
>> + if (!test_bit(i, &led->mc_cdev.available_colors))
>> + continue;
>> +
>> + if (i == LED_COLOR_ID_RED)
>> + reg_color_off = 0;
>> + else if (i == LED_COLOR_ID_GREEN)
>> + reg_color_off = 1;
>> + else if (i == LED_COLOR_ID_BLUE)
>> + reg_color_off = 2;
>> + else
>> + continue;
>> +
>> + if (led->ctrl_bank_enabled) {
>> + reg_number = priv->chip_info->bank_mix_reg + reg_color_off;
>> + } else {
>> + led_offset = (led->led_number * 3) + reg_color_off;
>> + reg_number = priv->chip_info->mix_out0_reg + led_offset;
>> + }
>> +
>> + ret = regmap_write(priv->regmap, reg_number,
>> + led->led_intensity[i]);
>> + if (ret) {
>> + dev_err(&priv->client->dev, "Cannot write LED value\n");
>> + goto out;
>> + }
>> + }
>> +out:
>> + return ret;
>> +}
>> +
>> +static int lp50xx_brightness_set(struct led_classdev *cdev,
>> + enum led_brightness brightness)
>> +{
>> + struct lp50xx_led *led = container_of(cdev, struct lp50xx_led, led_dev);
>> + int ret = 0;
>> + u8 reg_val;
>> +
>> + mutex_lock(&led->priv->lock);
>> +
>> + if (led->ctrl_bank_enabled)
>> + reg_val = led->priv->chip_info->bank_brt_reg;
>> + else
>> + reg_val = led->priv->chip_info->led_brightness0_reg +
>> + led->led_number;
>> +
>> + ret = regmap_write(led->priv->regmap, reg_val, brightness);
>> + if (ret)
>> + goto err_out;
>> +
>> + ret = lp50xx_set_intensity(led);
>> +err_out:
>> + mutex_unlock(&led->priv->lock);
>> + return ret;
>> +}
>> +
>> +static enum led_brightness lp50xx_brightness_get(struct led_classdev *cdev)
> Do we really need this op? Is it possible that the device will alter
> brightness autonomously ? IOW can't we rely on what we've written
> previously to the hw?
How can we be sure that the previous I/O actually wrote to the device?
If set_brightness fails does the LED class not modify the current
brightness setting?
So we have mismatched values and with this call back we can refresh the
right setting.
But I can remove it if you see no value in doing get_brightness call back.
>
>> +{
>> + struct lp50xx_led *led = container_of(cdev, struct lp50xx_led, led_dev);
>> + unsigned int brt_val;
>> + u8 reg_val;
>> + int ret;
>> +
>> + mutex_lock(&led->priv->lock);
>> +
>> + if (led->ctrl_bank_enabled)
>> + reg_val = led->priv->chip_info->bank_brt_reg;
>> + else
>> + reg_val = led->priv->chip_info->led_brightness0_reg + led->led_number;
>> +
>> + ret = regmap_read(led->priv->regmap, reg_val, &brt_val);
>> +
>> + mutex_unlock(&led->priv->lock);
>> +
>> + return brt_val;
>> +}
>> +
>> +static int lp50xx_set_color(struct led_classdev_mc *mcled_cdev,
>> + int color, int value)
>> +{
>> + struct lp50xx_led *led = mcled_cdev_to_led(mcled_cdev);
>> +
>> + led->led_intensity[color] = value;
>> +
>> + return 0;
>> +}
>> +
>> +static int lp50xx_set_banks(struct lp50xx *priv, u32 led_strings[])
> This is a bit misleading to introduce "strings" when the function
> claims to set "banks". Let's have the parameter name "led_banks".
Ack
>
>> +{
>> + u8 led_ctrl_enable = 0;
>> + u8 led1_ctrl_enable = 0;
>> + u8 ctrl_ext = 0;
> Let's have below instead of the above three variables:
>
> u32 bank_enable_mask = 0;
> u8 led_config_lo, led_config_hi;
Ack but I have to keep the initialization to 0 as the compiler
complained that these values may not be set.
>
>> + int ret;
>> + int j;
> This is subjective, but why j? We usually have 'i' for one level loop.
I think this was residual from code from previous revisions I will
change it to i
Ack
>
>> +
>> + for (j = 0; j <= priv->chip_info->num_leds - 1; j++) {
>> + if (led_strings[j] > (LP5024_MAX_LED_MODULES - 1)) {
>> + ctrl_ext = led_strings[j] - LP5024_MAX_LED_MODULES;
>> + led1_ctrl_enable |= (1 << ctrl_ext)> + } else {
>> + led_ctrl_enable |= (1 << led_strings[j]);
>> + }
>> + }
> This looks harder than it should be.
>
> for (i = 0; i < priv->chip_info->num_leds; i++)
> bank_enable_mask |= (1 << led_banks[i]);
>
> led_config_lo = (u8)(bank_enable_mask & 0xff);
> led_config_hi = (u8)(bank_enable_mask >> 8) & 0xff);
I will have to go through your logic to make sure it writes the correct
values.
There was a reason why I did it this way but that was a while back and I
have to review.
>> +
>> + ret = regmap_write(priv->regmap, LP50XX_LED_CFG0, led_ctrl_enable);
> ret = regmap_write(priv->regmap, LP50XX_LED_CFG0, led_config_lo);
> if (ret)
> return ret;
>
Ack
>> +
>> + if (led1_ctrl_enable)
>> + ret = regmap_write(priv->regmap, LP5036_LED_CFG1,
>> + led1_ctrl_enable);
> if (led_config_hi)
> ret = regmap_write(priv->regmap, LP5036_LED_CFG1,
> led_config_hi);
>
Ack
>> +
>> + return ret;
>> +}
>> +
>> +static int lp50xx_reset(struct lp50xx *priv)
>> +{
>> + if (priv->enable_gpio)
>> + return gpiod_direction_output(priv->enable_gpio, 1);
>> + else
>> + return regmap_write(priv->regmap, priv->chip_info->reset_reg,
>> + LP50XX_SW_RESET);
>> +}
>> +
>> +static int lp50xx_enable_disable(struct lp50xx *priv, u8 enable_disable)
>> +{
>> + return regmap_write(priv->regmap, LP50XX_DEV_CFG0, enable_disable);
>> +}
>> +
>> +static int lp50xx_probe_dt(struct lp50xx *priv)
>> +{
>> + u32 led_strings[LP5036_MAX_LED_MODULES];
> s/led_strings/led_banks/
Ack
>> + struct fwnode_handle *child = NULL;
>> + struct fwnode_handle *led_node = NULL;
>> + struct led_init_data init_data;
>> + struct lp50xx_led *led;
>> + int num_colors;
>> + u32 color_id;
>> + int led_number;
>> + size_t i = 0;
>> + int ret;
>> +
>> + priv->enable_gpio = devm_gpiod_get_optional(&priv->client->dev,
>> + "enable", GPIOD_OUT_LOW);
>> + if (IS_ERR(priv->enable_gpio)) {
>> + ret = PTR_ERR(priv->enable_gpio);
>> + dev_err(&priv->client->dev, "Failed to get enable gpio: %d\n",
>> + ret);
>> + return ret;
>> + }
>> +
>> + priv->regulator = devm_regulator_get(&priv->client->dev, "vled");
>> + if (IS_ERR(priv->regulator))
>> + priv->regulator = NULL;
>> +
>> + device_for_each_child_node(&priv->client->dev, child) {
>> + led = &priv->leds[i];
>> + if (fwnode_property_present(child, "ti,led-bank")) {
>> + ret = fwnode_property_read_u32_array(child,
>> + "ti,led-bank",
>> + NULL, 0);
>> + ret = fwnode_property_read_u32_array(child,
>> + "ti,led-bank",
>> + led_strings,
>> + ret);
>> +
>> + priv->num_of_banked_leds = ARRAY_SIZE(led_strings);
>> +
>> + ret = lp50xx_set_banks(priv, led_strings);
>> + if (ret) {
>> + dev_err(&priv->client->dev,
>> + "Cannot setup banked LEDs\n");
>> + fwnode_handle_put(child);
>> + goto child_out;
>> + }
>> + led->ctrl_bank_enabled = 1;
>> +
>> + } else {
>> + ret = fwnode_property_read_u32(child, "reg",
>> + &led_number);
>> +
>> + led->led_number = led_number;
>> + }
>> + if (ret) {
>> + dev_err(&priv->client->dev,
>> + "led sourcing property missing\n");
>> + fwnode_handle_put(child);
>> + goto child_out;
>> + }
>> +
>> + if (led_number > priv->chip_info->num_leds) {
>> + dev_err(&priv->client->dev,
>> + "led-sources property is invalid\n");
>> + ret = -EINVAL;
>> + fwnode_handle_put(child);
>> + goto child_out;
>> + }
>> +
>> + init_data.fwnode = child;
>> + init_data.devicename = priv->client->name;
>> + init_data.default_label = ":";
> devicename and default_label are for LEDs with mandatory devicename
> and for backward compatibility. Neither is pertinent to this driver.
Ack
Dan
[...]
Powered by blists - more mailing lists