[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <b3a3ca68-45ab-c60a-7f48-636b102b32c1@axentia.se>
Date: Mon, 23 Sep 2019 18:30:35 +0000
From: Peter Rosin <peda@...ntia.se>
To: Bartosz Golaszewski <brgl@...ev.pl>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
CC: "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-i2c@...r.kernel.org" <linux-i2c@...r.kernel.org>,
Bartosz Golaszewski <bgolaszewski@...libre.com>
Subject: Re: [PATCH] dt-bindings: at24: convert the binding document to yaml
On 2019-09-23 19:52, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@...libre.com>
>
> Convert the binding document for at24 EEPROMs from txt to yaml. The
> compatible property uses a regex pattern to address all the possible
> combinations of "vendor,model" strings.
>
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@...libre.com>
> ---
> .../devicetree/bindings/eeprom/at24.txt | 90 +--------------
> .../devicetree/bindings/eeprom/at24.yaml | 107 ++++++++++++++++++
> MAINTAINERS | 2 +-
> 3 files changed, 109 insertions(+), 90 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/eeprom/at24.yaml
>
> diff --git a/Documentation/devicetree/bindings/eeprom/at24.txt b/Documentation/devicetree/bindings/eeprom/at24.txt
> index 22aead844d0f..c94acbb8cb0c 100644
> --- a/Documentation/devicetree/bindings/eeprom/at24.txt
> +++ b/Documentation/devicetree/bindings/eeprom/at24.txt
> @@ -1,89 +1 @@
> -EEPROMs (I2C)
> -
> -Required properties:
> -
> - - compatible: Must be a "<manufacturer>,<model>" pair. The following <model>
> - values are supported (assuming "atmel" as manufacturer):
> -
> - "atmel,24c00",
> - "atmel,24c01",
> - "atmel,24cs01",
> - "atmel,24c02",
> - "atmel,24cs02",
> - "atmel,24mac402",
> - "atmel,24mac602",
> - "atmel,spd",
> - "atmel,24c04",
> - "atmel,24cs04",
> - "atmel,24c08",
> - "atmel,24cs08",
> - "atmel,24c16",
> - "atmel,24cs16",
> - "atmel,24c32",
> - "atmel,24cs32",
> - "atmel,24c64",
> - "atmel,24cs64",
> - "atmel,24c128",
> - "atmel,24c256",
> - "atmel,24c512",
> - "atmel,24c1024",
> - "atmel,24c2048",
> -
> - If <manufacturer> is not "atmel", then a fallback must be used
> - with the same <model> and "atmel" as manufacturer.
> -
> - Example:
> - compatible = "microchip,24c128", "atmel,24c128";
> -
> - Supported manufacturers are:
> -
> - "catalyst",
> - "microchip",
> - "nxp",
> - "ramtron",
> - "renesas",
> - "rohm",
> - "st",
> -
> - Some vendors use different model names for chips which are just
> - variants of the above. Known such exceptions are listed below:
> -
> - "nxp,se97b" - the fallback is "atmel,24c02",
> - "renesas,r1ex24002" - the fallback is "atmel,24c02"
> - "renesas,r1ex24016" - the fallback is "atmel,24c16"
> - "renesas,r1ex24128" - the fallback is "atmel,24c128"
> - "rohm,br24t01" - the fallback is "atmel,24c01"
> -
> - - reg: The I2C address of the EEPROM.
> -
> -Optional properties:
> -
> - - pagesize: The length of the pagesize for writing. Please consult the
> - manual of your device, that value varies a lot. A wrong value
> - may result in data loss! If not specified, a safety value of
> - '1' is used which will be very slow.
> -
> - - read-only: This parameterless property disables writes to the eeprom.
> -
> - - size: Total eeprom size in bytes.
> -
> - - no-read-rollover: This parameterless property indicates that the
> - multi-address eeprom does not automatically roll over
> - reads to the next slave address. Please consult the
> - manual of your device.
> -
> - - wp-gpios: GPIO to which the write-protect pin of the chip is connected.
> -
> - - address-width: number of address bits (one of 8, 16).
> -
> - - num-addresses: total number of i2c slave addresses this device takes
> -
> -Example:
> -
> -eeprom@52 {
> - compatible = "atmel,24c32";
> - reg = <0x52>;
> - pagesize = <32>;
> - wp-gpios = <&gpio1 3 0>;
> - num-addresses = <8>;
> -};
> +This file has been moved to at24.yaml.
> diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml
> new file mode 100644
> index 000000000000..28c8b068c8a1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/eeprom/at24.yaml
> @@ -0,0 +1,107 @@
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright 2019 BayLibre SAS
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/eeprom/at24.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: I2C EEPROMs compatible with Atmel's AT24
> +
> +maintainers:
> + - Bartosz Golaszewski <bgolaszewski@...libre.com>
> +
> +properties:
> + compatible:
> + additionalItems: true
> + maxItems: 2
> + pattern: "^(atmel|catalyst|microchip|nxp|ramtron|renesas|rohm|st),24(c|cs|mac)[0-9]+$"
> + oneOf:
> + - const: nxp,se97b
> + - const: renesas,r1ex24002
> + - const: renesas,r1ex24016
> + - const: renesas,r1ex24128
> + - const: rohm,br24t01
> + contains:
> + enum:
> + - atmel,24c00
> + - atmel,24c01
> + - atmel,24cs01
> + - atmel,24c02
> + - atmel,24cs02
> + - atmel,24mac402
> + - atmel,24mac602
> + - atmel,spd
> + - atmel,24c04
> + - atmel,24cs04
> + - atmel,24c08
> + - atmel,24cs08
> + - atmel,24c16
> + - atmel,24cs16
> + - atmel,24c32
> + - atmel,24cs32
> + - atmel,24c64
> + - atmel,24cs64
> + - atmel,24c128
> + - atmel,24c256
> + - atmel,24c512
> + - atmel,24c1024
> + - atmel,24c2048
The previous binding allows more e.g.
compatible = "nxp,spd", "atmel,spd";
which is no longer allowed. That might be a problem? The previous binding
also allows less e.g.
compatible = "atmel,24c00", "renesas,24mac402";
which of course is nonsense but AFAIU now allowed.
The new formal rules are therefore not "right", and it might be impossible
to express the subtleties of this weird binding with the current spec so
there might be little to do about it? But either way, these issues are not
mentioned neither in the binding nor the commit message. Should they be
mentioned?
Cheers,
Peter
> +
> + reg:
> + description:
> + The I2C slave address of the EEPROM.
> + maxItems: 1
> +
> + pagesize:
> + description:
> + The length of the pagesize for writing. Please consult the
> + manual of your device, that value varies a lot. A wrong value
> + may result in data loss! If not specified, a safety value of
> + '1' is used which will be very slow.
> + type: integer
> +
> + read-only:
> + description:
> + This parameterless property disables writes to the eeprom.
> + type: boolean
> +
> + size:
> + description:
> + Total eeprom size in bytes.
> + type: integer
> +
> + no-read-rollover:
> + description:
> + This parameterless property indicates that the multi-address
> + eeprom does not automatically roll over reads to the next slave
> + address. Please consult the manual of your device.
> + type: boolean
> +
> + wp-gpios:
> + description:
> + GPIO to which the write-protect pin of the chip is connected.
> + maxItems: 1
> +
> + address-width:
> + description:
> + Number of address bits (one of 8, 16).
> + type: integer
> +
> + num-addresses:
> + description:
> + Total number of i2c slave addresses this device takes.
> + type: integer
> +
> +required:
> + - compatible
> + - reg
> +
> +examples:
> + - |
> + eeprom@52 {
> + compatible = "microchip,24c32", "atmel,24c32";
> + reg = <0x52>;
> + pagesize = <32>;
> + wp-gpios = <&gpio1 3 0>;
> + num-addresses = <8>;
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index a400af0501c9..3c7ced686966 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2698,7 +2698,7 @@ M: Bartosz Golaszewski <bgolaszewski@...libre.com>
> L: linux-i2c@...r.kernel.org
> T: git git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git
> S: Maintained
> -F: Documentation/devicetree/bindings/eeprom/at24.txt
> +F: Documentation/devicetree/bindings/eeprom/at24.yaml
> F: drivers/misc/eeprom/at24.c
>
> ATA OVER ETHERNET (AOE) DRIVER
>
Powered by blists - more mailing lists