linux-kernel - RE: [PATCH 2/5] dt-bindings: mfd: da9062: add regulator voltage selection documentation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 24 Sep 2019 09:23:32 +0000
From:   Adam Thomson <Adam.Thomson.Opensource@...semi.com>
To:     Marco Felsch <m.felsch@...gutronix.de>,
        Support Opensource <Support.Opensource@...semi.com>,
        "lee.jones@...aro.org" <lee.jones@...aro.org>,
        "robh+dt@...nel.org" <robh+dt@...nel.org>,
        "lgirdwood@...il.com" <lgirdwood@...il.com>,
        "broonie@...nel.org" <broonie@...nel.org>,
        Steve Twiss <stwiss.opensource@...semi.com>
CC:     "kernel@...gutronix.de" <kernel@...gutronix.de>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH 2/5] dt-bindings: mfd: da9062: add regulator voltage
 selection documentation

On 17 September 2019 13:43, Marco Felsch wrote:

> Add the documentation which describe the voltage selection gpio support.
> This property can be applied to each subnode within the 'regulators'
> node so each regulator can be configured differently.
> 
> Signed-off-by: Marco Felsch <m.felsch@...gutronix.de>
> ---
>  Documentation/devicetree/bindings/mfd/da9062.txt | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt
> b/Documentation/devicetree/bindings/mfd/da9062.txt
> index edca653a5777..9d9820d8177d 100644
> --- a/Documentation/devicetree/bindings/mfd/da9062.txt
> +++ b/Documentation/devicetree/bindings/mfd/da9062.txt
> @@ -66,6 +66,15 @@ Sub-nodes:
>    details of individual regulator device can be found in:
>    Documentation/devicetree/bindings/regulator/regulator.txt
> 
> +  Optional regulator device-specific properties:
> +  - dlg,vsel-sense-gpios : The GPIO reference which should be used by the
> +    regulator to switch the voltage between active/suspend voltage settings. If
> +    the signal is active the active-settings are applied else the suspend
> +    settings are applied. Attention: Sharing the same gpio for other purposes
> +    or across multiple regulators is possible but the gpio settings must be the
> +    same. Also the gpio phandle must refer to to the dlg,da9062-gpio device
> +    other gpios are not allowed and make no sense.
> +

Should we not use the binding names that are defined in 'gpio-regulator.yaml' as
these seem to be generic and would probably serve the purpose here?

>  - rtc : This node defines settings required for the Real-Time Clock associated
>    with the DA9062. There are currently no entries in this binding, however
>    compatible = "dlg,da9062-rtc" should be added if a node is created.
> --
> 2.20.1