| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 24 Sep 2019 16:52:23 +0100
From: Russell King - ARM Linux admin <linux@...linux.org.uk>
To: Xiaowei Bao <xiaowei.bao@....com>
Cc: mark.rutland@....com, devicetree@...r.kernel.org,
lorenzo.pieralisi@....com, linux-pci@...r.kernel.org,
Zhiqiang.Hou@....com, linux-kernel@...r.kernel.org,
leoyang.li@....com, Minghuan.Lian@....com, robh+dt@...nel.org,
linux-arm-kernel@...ts.infradead.org, bhelgaas@...gle.com,
andrew.murray@....com, kishon@...com, shawnguo@...nel.org,
mingkai.hu@....com
Subject: Re: [PATCH 0/6] Add the Mobiveil EP and Layerscape Gen4 EP driver
support
On Tue, Sep 24, 2019 at 03:18:47PM +0100, Russell King - ARM Linux admin wrote:
> On Mon, Sep 16, 2019 at 10:17:36AM +0800, Xiaowei Bao wrote:
> > This patch set are for adding Mobiveil EP driver and adding PCIe Gen4
> > EP driver of NXP Layerscape platform.
> >
> > This patch set depends on:
> > https://patchwork.kernel.org/project/linux-pci/list/?series=159139
> >
> > Xiaowei Bao (6):
> > PCI: mobiveil: Add the EP driver support
> > dt-bindings: Add DT binding for PCIE GEN4 EP of the layerscape
> > PCI: mobiveil: Add PCIe Gen4 EP driver for NXP Layerscape SoCs
> > PCI: mobiveil: Add workaround for unsupported request error
> > arm64: dts: lx2160a: Add PCIe EP node
> > misc: pci_endpoint_test: Add the layerscape PCIe GEN4 EP device
> > support
> >
> > .../bindings/pci/layerscape-pcie-gen4.txt | 28 +-
> > MAINTAINERS | 3 +
> > arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 56 ++
> > drivers/misc/pci_endpoint_test.c | 2 +
> > drivers/pci/controller/mobiveil/Kconfig | 22 +-
> > drivers/pci/controller/mobiveil/Makefile | 2 +
> > .../controller/mobiveil/pcie-layerscape-gen4-ep.c | 169 ++++++
> > drivers/pci/controller/mobiveil/pcie-mobiveil-ep.c | 568 +++++++++++++++++++++
> > drivers/pci/controller/mobiveil/pcie-mobiveil.c | 99 +++-
> > drivers/pci/controller/mobiveil/pcie-mobiveil.h | 72 +++
> > 10 files changed, 1009 insertions(+), 12 deletions(-)
> > create mode 100644 drivers/pci/controller/mobiveil/pcie-layerscape-gen4-ep.c
> > create mode 100644 drivers/pci/controller/mobiveil/pcie-mobiveil-ep.c
>
> Hi,
>
> I've applied "PCI: mobiveil: Fix the CPU base address setup in inbound
> window" and your patch set to 5.3, which seems to be able to detect the
> PCIe card I have plugged in:
>
> layerscape-pcie-gen4 3800000.pcie: host bridge /soc/pcie@...0000 ranges:
> layerscape-pcie-gen4 3800000.pcie: MEM 0xa040000000..0xa07fffffff -> 0x40000000
> layerscape-pcie-gen4 3800000.pcie: PCI host bridge to bus 0000:00
> pci_bus 0000:00: root bus resource [bus 00-ff]
> pci_bus 0000:00: root bus resource [mem 0xa040000000-0xa07fffffff] (bus address
> [0x40000000-0x7fffffff])
> pci 0000:00:00.0: [1957:8d90] type 01 class 0x060400
> pci 0000:00:00.0: enabling Extended Tags
> pci 0000:00:00.0: supports D1 D2
> pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> pci 0000:01:00.0: [15b3:6750] type 00 class 0x020000
> pci 0000:01:00.0: reg 0x10: [mem 0xa040000000-0xa0400fffff 64bit]
> pci 0000:01:00.0: reg 0x18: [mem 0xa040800000-0xa040ffffff 64bit pref]
> pci 0000:01:00.0: reg 0x30: [mem 0xa041000000-0xa0410fffff pref]
> pci 0000:00:00.0: up support 3 enabled 0
> pci 0000:00:00.0: dn support 1 enabled 0
> pci 0000:00:00.0: BAR 9: assigned [mem 0xa040000000-0xa0407fffff 64bit pref]
> pci 0000:00:00.0: BAR 8: assigned [mem 0xa040800000-0xa0409fffff]
> pci 0000:01:00.0: BAR 2: assigned [mem 0xa040000000-0xa0407fffff 64bit pref]
> pci 0000:01:00.0: BAR 0: assigned [mem 0xa040800000-0xa0408fffff 64bit]
> pci 0000:01:00.0: BAR 6: assigned [mem 0xa040900000-0xa0409fffff pref]
> pci 0000:00:00.0: PCI bridge to [bus 01-ff]
> pci 0000:00:00.0: bridge window [mem 0xa040800000-0xa0409fffff]
> pci 0000:00:00.0: bridge window [mem 0xa040000000-0xa0407fffff 64bit pref]
> pci 0000:00:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256pcieport 0000:00:00.0: PCIe capabilities: 0x13
> pcieport 0000:00:00.0: init_service_irqs: -19
>
> However, a bit later in the kernel boot, I get:
>
> SError Interrupt on CPU1, code 0xbf000002 -- SError
> CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.3.0+ #392
> Hardware name: SolidRun LX2160A COM express type 7 module (DT)
> pstate: 60400085 (nZCv daIf +PAN -UAO)
> pc : pci_generic_config_read+0xb0/0xc0
> lr : pci_generic_config_read+0x1c/0xc0
> sp : ffffff8010f9baf0
> x29: ffffff8010f9baf0 x28: ffffff8010d620a0
> x27: ffffff8010d79000 x26: ffffff8010d62000
> x25: ffffff8010cb06d4 x24: 0000000000000000
> x23: ffffff8010e499b8 x22: ffffff8010f9bbaf
> x21: 0000000000000000 x20: ffffffe2eda11800
> x19: ffffff8010f62158 x18: ffffff8010bdede0
> x17: ffffff8010bdede8 x16: ffffff8010b96970
> x15: ffffffffffffffff x14: ffffffffff000000
> x13: ffffffffffffffff x12: 0000000000000030
> x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f
> x9 : 2dff716475687163 x8 : ffffffffffffffff
> x7 : fefefefefefefefe x6 : 0000000000000000
> x5 : 0000000000000000 x4 : ffffff8010f9bb6c
> x3 : 0000000000000001 x2 : 0000000000000003
> x1 : 0000000000000000 x0 : 0000000000000000
> Kernel panic - not syncing: Asynchronous SError Interrupt
> CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.3.0+ #392
> Hardware name: SolidRun LX2160A COM express type 7 module (DT)
> Call trace:
> dump_backtrace+0x0/0x120
> show_stack+0x14/0x1c
> dump_stack+0x9c/0xc0
> panic+0x148/0x34c
> print_tainted+0x0/0xa8
> arm64_serror_panic+0x74/0x80
> do_serror+0x8c/0x13c
> el1_error+0xbc/0x160
> pci_generic_config_read+0xb0/0xc0
> pci_bus_read_config_byte+0x64/0x90
> pci_read_config_byte+0x40/0x48
> pci_assign_irq+0x34/0xc8
> pci_device_probe+0x28/0x148
> really_probe+0x1c4/0x2d0
> driver_probe_device+0x58/0xfc
> device_driver_attach+0x68/0x70
> __driver_attach+0x94/0xdc
> bus_for_each_dev+0x50/0xa0
> driver_attach+0x20/0x28
> bus_add_driver+0x14c/0x200
> driver_register+0x6c/0x124
> __pci_register_driver+0x48/0x50
> mlx4_init+0x154/0x180
> do_one_initcall+0x30/0x250
> kernel_init_freeable+0x23c/0x32c
> kernel_init+0x10/0xfc
> ret_from_fork+0x10/0x18
> SMP: stopping secondary CPUs
> Kernel Offset: disabled
> CPU features: 0x0002,21006008
> Memory Limit: none
>
> and there it dies. Any ideas?
The failing access seems to be:
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
for the Mellanox Ethernet card. Presumably, being a PCIe ethernet
card, it doesn't implement this register (just a guess), and aborts
the PCI transaction, which is presumably triggering the above SError.
Note that I've used this card with the Macchiatobin (Armada 8040)
without issue.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up
Powered by blists - more mailing lists