[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190924164549.27058-3-sashal@kernel.org>
Date: Tue, 24 Sep 2019 12:44:42 -0400
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc: Matt Redfearn <matt.redfearn@...nci.com>,
Andrzej Hajda <a.hajda@...sung.com>,
Sasha Levin <sashal@...nel.org>,
dri-devel@...ts.freedesktop.org
Subject: [PATCH AUTOSEL 5.2 03/70] drm/bridge: adv7511: Attach to DSI host at probe time
From: Matt Redfearn <matt.redfearn@...nci.com>
[ Upstream commit 83f35bc3a852f1c3892c7474998c5cec707c7ba3 ]
In contrast to all of the DSI panel drivers in drivers/gpu/drm/panel
which attach to the DSI host via mipi_dsi_attach() at probe time, the
ADV7533 bridge device does not. Instead it defers this to the point that
the upstream device connects to its bridge via drm_bridge_attach().
The generic Synopsys MIPI DSI host driver does not register it's own
drm_bridge until the MIPI DSI has attached. But it does not call
drm_bridge_attach() on the downstream device until the upstream device
has attached. This leads to a chicken and the egg failure and the DRM
pipeline does not complete.
Since all other mipi_dsi_device drivers call mipi_dsi_attach() in
probe(), make the adv7533 mipi_dsi_device do the same. This ensures that
the Synopsys MIPI DSI host registers it's bridge such that it is
available for the upstream device to connect to.
Signed-off-by: Matt Redfearn <matt.redfearn@...nci.com>
Signed-off-by: Andrzej Hajda <a.hajda@...sung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190627151740.2277-1-matt.redfearn@thinci.com
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index 0e3e868850d55..018f39e0e3754 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -874,9 +874,6 @@ static int adv7511_bridge_attach(struct drm_bridge *bridge)
&adv7511_connector_helper_funcs);
drm_connector_attach_encoder(&adv->connector, bridge->encoder);
- if (adv->type == ADV7533)
- ret = adv7533_attach_dsi(adv);
-
if (adv->i2c_main->irq)
regmap_write(adv->regmap, ADV7511_REG_INT_ENABLE(0),
ADV7511_INT0_HPD);
@@ -1222,8 +1219,17 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
drm_bridge_add(&adv7511->bridge);
adv7511_audio_init(dev, adv7511);
+
+ if (adv7511->type == ADV7533) {
+ ret = adv7533_attach_dsi(adv7511);
+ if (ret)
+ goto err_remove_bridge;
+ }
+
return 0;
+err_remove_bridge:
+ drm_bridge_remove(&adv7511->bridge);
err_unregister_cec:
i2c_unregister_device(adv7511->i2c_cec);
if (adv7511->cec_clk)
--
2.20.1
Powered by blists - more mailing lists