[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1569351740-6285-2-git-send-email-hongweiz@ami.com>
Date: Tue, 24 Sep 2019 15:02:20 -0400
From: Hongwei Zhang <hongweiz@....com>
To: Andrew Jeffery <andrew@...id.au>,
Linus Walleij <linus.walleij@...aro.org>,
<linux-gpio@...r.kernel.org>, Joel Stanley <joel@....id.au>
CC: Hongwei Zhang <hongweiz@....com>, <devicetree@...r.kernel.org>,
<linux-aspeed@...ts.ozlabs.org>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Ard Biesheuvel <ard.biesheuvel@...aro.org>,
Arnd Bergmann <arnd@...db.de>,
Andrew Morton <akpm@...ux-foundation.org>,
Benjamin Gaignard <benjamin.gaignard@...aro.org>,
Doug Anderson <armlinux@...isordat.com>,
Masahiro Yamada <yamada.masahiro@...ionext.com>,
Mauro Carvalho Chehab <mchehab+samsung@...nel.org>,
Mike Rapoport <rppt@...ux.ibm.com>,
Russell King <linux@...linux.org.uk>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
Subject: [v1, 0/1] gpio: dts: aspeed: Add SGPIO driver
Add SGPIO driver support for Aspeed AST2500 SoC.
Signed-off-by: Hongwei Zhang <hongweiz@....com>
---
arch/arm/Kconfig | 2 ++
arch/arm/boot/dts/aspeed-g5.dtsi | 16 +++++++++++++++-
drivers/gpio/Kconfig | 8 ++++++++
drivers/gpio/Makefile | 1 +
4 files changed, 26 insertions(+), 1 deletion(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2436021..c9f08ab 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1460,6 +1460,8 @@ config ARCH_NR_GPIO
default 416 if ARCH_SUNXI
default 392 if ARCH_U8500
default 352 if ARCH_VT8500
+ default 312 if MACH_ASPEED_G5
+ default 304 if MACH_ASPEED_G4
default 288 if ARCH_ROCKCHIP
default 264 if MACH_H4700
default 0
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 00f05bd..85da7ea 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -311,7 +311,7 @@
#gpio-cells = <2>;
gpio-controller;
compatible = "aspeed,ast2500-gpio";
- reg = <0x1e780000 0x1000>;
+ reg = <0x1e780000 0x200>;
interrupts = <20>;
gpio-ranges = <&pinctrl 0 0 232>;
clocks = <&syscon ASPEED_CLK_APB>;
@@ -319,6 +319,20 @@
#interrupt-cells = <2>;
};
+ sgpio: sgpio@...80200 {
+ #gpio-cells = <2>;
+ compatible = "aspeed,ast2500-sgpio";
+ gpio-controller;
+ interrupts = <40>;
+ reg = <0x1e780200 0x0100>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ interrupt-controller;
+ ngpios = <8>;
+ bus-frequency = <12000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sgpm_default>;
+ };
+
rtc: rtc@...81000 {
compatible = "aspeed,ast2500-rtc";
reg = <0x1e781000 0x18>;
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index bb13c26..e94f903 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -120,6 +120,14 @@ config GPIO_ASPEED
help
Say Y here to support Aspeed AST2400 and AST2500 GPIO controllers.
+config SGPIO_ASPEED
+ bool "Aspeed SGPIO support"
+ depends on (ARCH_ASPEED || COMPILE_TEST) && OF_GPIO
+ select GPIO_GENERIC
+ select GPIOLIB_IRQCHIP
+ help
+ Say Y here to support Aspeed AST2500 SGPIO functionality.
+
config GPIO_ATH79
tristate "Atheros AR71XX/AR724X/AR913X GPIO support"
default y if ATH79
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index a4e9117..bebbd82 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_GPIO_AMD_FCH) += gpio-amd-fch.o
obj-$(CONFIG_GPIO_AMDPT) += gpio-amdpt.o
obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o
obj-$(CONFIG_GPIO_ASPEED) += gpio-aspeed.o
+obj-$(CONFIG_SGPIO_ASPEED) += sgpio-aspeed.o
obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o
obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o
obj-$(CONFIG_GPIO_BD70528) += gpio-bd70528.o
--
2.7.4
Powered by blists - more mailing lists