| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190925073239.GD1857@linux.ibm.com>
Date: Wed, 25 Sep 2019 10:32:39 +0300
From: Mike Rapoport <rppt@...ux.ibm.com>
To: Yunfeng Ye <yeyunfeng@...wei.com>
Cc: Wei Yang <richardw.yang@...ux.intel.com>,
akpm@...ux-foundation.org, osalvador@...e.de, mhocko@...e.co,
dan.j.williams@...el.com, david@...hat.com, cai@....pw,
linux-mm@...ck.org,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH V3] mm: Support memblock alloc on the exact node for
sparse_buffer_init()
On Wed, Sep 25, 2019 at 03:18:43PM +0800, Yunfeng Ye wrote:
> sparse_buffer_init() use memblock_alloc_try_nid_raw() to allocate memory
> for page management structure, if memory allocation fails from specified
> node, it will fall back to allocate from other nodes.
>
> Normally, the page management structure will not exceed 2% of the total
> memory, but a large continuous block of allocation is needed. In most
> cases, memory allocation from the specified node will success always,
> but a node memory become highly fragmented will fail. we expect to
> allocate memory base section rather than by allocating a large block of
> memory from other NUMA nodes
>
> Add memblock_alloc_exact_nid_raw() for this situation, which allocate
> boot memory block on the exact node. If a large contiguous block memory
> allocate fail in sparse_buffer_init(), it will fall back to allocate
> small block memory base section.
>
> Signed-off-by: Yunfeng Ye <yeyunfeng@...wei.com>
One nit below, otherwise
Reviewed-by: Mike Rapoport <rppt@...ux.ibm.com>
> ---
> v2 -> v3:
> - use "bool exact_nid" instead of "int need_exact_nid"
> - remove the comment "without panicking"
>
> v1 -> v2:
> - use memblock_alloc_exact_nid_raw() rather than using a flag
>
> include/linux/memblock.h | 3 +++
> mm/memblock.c | 65 ++++++++++++++++++++++++++++++++++++++++--------
> mm/sparse.c | 2 +-
> 3 files changed, 58 insertions(+), 12 deletions(-)
>
> diff --git a/include/linux/memblock.h b/include/linux/memblock.h
> index f491690..b38bbef 100644
> --- a/include/linux/memblock.h
> +++ b/include/linux/memblock.h
> @@ -358,6 +358,9 @@ static inline phys_addr_t memblock_phys_alloc(phys_addr_t size,
> MEMBLOCK_ALLOC_ACCESSIBLE);
> }
>
> +void *memblock_alloc_exact_nid_raw(phys_addr_t size, phys_addr_t align,
> + phys_addr_t min_addr, phys_addr_t max_addr,
> + int nid);
> void *memblock_alloc_try_nid_raw(phys_addr_t size, phys_addr_t align,
> phys_addr_t min_addr, phys_addr_t max_addr,
> int nid);
> diff --git a/mm/memblock.c b/mm/memblock.c
> index 7d4f61a..0de9d83 100644
> --- a/mm/memblock.c
> +++ b/mm/memblock.c
> @@ -1323,12 +1323,13 @@ __next_mem_pfn_range_in_zone(u64 *idx, struct zone *zone,
> * @start: the lower bound of the memory region to allocate (phys address)
> * @end: the upper bound of the memory region to allocate (phys address)
> * @nid: nid of the free area to find, %NUMA_NO_NODE for any node
> + * @exact_nid: control the allocation fall back to other nodes
> *
> * The allocation is performed from memory region limited by
> * memblock.current_limit if @max_addr == %MEMBLOCK_ALLOC_ACCESSIBLE.
> *
> - * If the specified node can not hold the requested memory the
> - * allocation falls back to any node in the system
> + * If the specified node can not hold the requested memory and @exact_nid
> + * is zero, the allocation falls back to any node in the system
^ is false ;-)
> *
> * For systems with memory mirroring, the allocation is attempted first
> * from the regions with mirroring enabled and then retried from any
> @@ -1342,7 +1343,8 @@ __next_mem_pfn_range_in_zone(u64 *idx, struct zone *zone,
> */
> static phys_addr_t __init memblock_alloc_range_nid(phys_addr_t size,
> phys_addr_t align, phys_addr_t start,
> - phys_addr_t end, int nid)
> + phys_addr_t end, int nid,
> + bool exact_nid)
> {
> enum memblock_flags flags = choose_memblock_flags();
> phys_addr_t found;
> @@ -1365,7 +1367,7 @@ static phys_addr_t __init memblock_alloc_range_nid(phys_addr_t size,
> if (found && !memblock_reserve(found, size))
> goto done;
>
> - if (nid != NUMA_NO_NODE) {
> + if (nid != NUMA_NO_NODE && !exact_nid) {
> found = memblock_find_in_range_node(size, align, start,
> end, NUMA_NO_NODE,
> flags);
> @@ -1413,7 +1415,8 @@ phys_addr_t __init memblock_phys_alloc_range(phys_addr_t size,
> phys_addr_t start,
> phys_addr_t end)
> {
> - return memblock_alloc_range_nid(size, align, start, end, NUMA_NO_NODE);
> + return memblock_alloc_range_nid(size, align, start, end, NUMA_NO_NODE,
> + false);
> }
>
> /**
> @@ -1432,7 +1435,7 @@ phys_addr_t __init memblock_phys_alloc_range(phys_addr_t size,
> phys_addr_t __init memblock_phys_alloc_try_nid(phys_addr_t size, phys_addr_t align, int nid)
> {
> return memblock_alloc_range_nid(size, align, 0,
> - MEMBLOCK_ALLOC_ACCESSIBLE, nid);
> + MEMBLOCK_ALLOC_ACCESSIBLE, nid, false);
> }
>
> /**
> @@ -1442,6 +1445,7 @@ phys_addr_t __init memblock_phys_alloc_try_nid(phys_addr_t size, phys_addr_t ali
> * @min_addr: the lower bound of the memory region to allocate (phys address)
> * @max_addr: the upper bound of the memory region to allocate (phys address)
> * @nid: nid of the free area to find, %NUMA_NO_NODE for any node
> + * @exact_nid: control the allocation fall back to other nodes
> *
> * Allocates memory block using memblock_alloc_range_nid() and
> * converts the returned physical address to virtual.
> @@ -1457,7 +1461,7 @@ phys_addr_t __init memblock_phys_alloc_try_nid(phys_addr_t size, phys_addr_t ali
> static void * __init memblock_alloc_internal(
> phys_addr_t size, phys_addr_t align,
> phys_addr_t min_addr, phys_addr_t max_addr,
> - int nid)
> + int nid, bool exact_nid)
> {
> phys_addr_t alloc;
>
> @@ -1469,11 +1473,13 @@ static void * __init memblock_alloc_internal(
> if (WARN_ON_ONCE(slab_is_available()))
> return kzalloc_node(size, GFP_NOWAIT, nid);
>
> - alloc = memblock_alloc_range_nid(size, align, min_addr, max_addr, nid);
> + alloc = memblock_alloc_range_nid(size, align, min_addr, max_addr, nid,
> + exact_nid);
>
> /* retry allocation without lower limit */
> if (!alloc && min_addr)
> - alloc = memblock_alloc_range_nid(size, align, 0, max_addr, nid);
> + alloc = memblock_alloc_range_nid(size, align, 0, max_addr, nid,
> + exact_nid);
>
> if (!alloc)
> return NULL;
> @@ -1482,6 +1488,43 @@ static void * __init memblock_alloc_internal(
> }
>
> /**
> + * memblock_alloc_exact_nid_raw - allocate boot memory block on the exact node
> + * without zeroing memory
> + * @size: size of memory block to be allocated in bytes
> + * @align: alignment of the region and block's size
> + * @min_addr: the lower bound of the memory region from where the allocation
> + * is preferred (phys address)
> + * @max_addr: the upper bound of the memory region from where the allocation
> + * is preferred (phys address), or %MEMBLOCK_ALLOC_ACCESSIBLE to
> + * allocate only from memory limited by memblock.current_limit value
> + * @nid: nid of the free area to find, %NUMA_NO_NODE for any node
> + *
> + * Public function, provides additional debug information (including caller
> + * info), if enabled. Does not zero allocated memory.
> + *
> + * Return:
> + * Virtual address of allocated memory block on success, NULL on failure.
> + */
> +void * __init memblock_alloc_exact_nid_raw(
> + phys_addr_t size, phys_addr_t align,
> + phys_addr_t min_addr, phys_addr_t max_addr,
> + int nid)
> +{
> + void *ptr;
> +
> + memblock_dbg("%s: %llu bytes align=0x%llx nid=%d from=%pa max_addr=%pa %pS\n",
> + __func__, (u64)size, (u64)align, nid, &min_addr,
> + &max_addr, (void *)_RET_IP_);
> +
> + ptr = memblock_alloc_internal(size, align,
> + min_addr, max_addr, nid, true);
> + if (ptr && size > 0)
> + page_init_poison(ptr, size);
> +
> + return ptr;
> +}
> +
> +/**
> * memblock_alloc_try_nid_raw - allocate boot memory block without zeroing
> * memory and without panicking
> * @size: size of memory block to be allocated in bytes
> @@ -1512,7 +1555,7 @@ void * __init memblock_alloc_try_nid_raw(
> &max_addr, (void *)_RET_IP_);
>
> ptr = memblock_alloc_internal(size, align,
> - min_addr, max_addr, nid);
> + min_addr, max_addr, nid, false);
> if (ptr && size > 0)
> page_init_poison(ptr, size);
>
> @@ -1547,7 +1590,7 @@ void * __init memblock_alloc_try_nid(
> __func__, (u64)size, (u64)align, nid, &min_addr,
> &max_addr, (void *)_RET_IP_);
> ptr = memblock_alloc_internal(size, align,
> - min_addr, max_addr, nid);
> + min_addr, max_addr, nid, false);
> if (ptr)
> memset(ptr, 0, size);
>
> diff --git a/mm/sparse.c b/mm/sparse.c
> index 72f010d..1a06471 100644
> --- a/mm/sparse.c
> +++ b/mm/sparse.c
> @@ -475,7 +475,7 @@ static void __init sparse_buffer_init(unsigned long size, int nid)
> phys_addr_t addr = __pa(MAX_DMA_ADDRESS);
> WARN_ON(sparsemap_buf); /* forgot to call sparse_buffer_fini()? */
> sparsemap_buf =
> - memblock_alloc_try_nid_raw(size, PAGE_SIZE,
> + memblock_alloc_exact_nid_raw(size, PAGE_SIZE,
> addr,
> MEMBLOCK_ALLOC_ACCESSIBLE, nid);
> sparsemap_buf_end = sparsemap_buf + size;
> --
> 2.7.4
>
--
Sincerely yours,
Mike.
Powered by blists - more mailing lists