[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190925091143.15468-2-lukma@denx.de>
Date: Wed, 25 Sep 2019 11:11:42 +0200
From: Lukasz Majewski <lukma@...x.de>
To: Mark Brown <broonie@...nel.org>
Cc: linux-spi@...r.kernel.org, linux-kernel@...r.kernel.org,
krzk@...nel.org, Lukasz Majewski <lukma@...x.de>
Subject: [PATCH v2 1/2] spi: Add call to spi_slave_abort() function when spidev driver is released
This change is necessary for spidev devices (e.g. /dev/spidev3.0) working
in the slave mode (like NXP's dspi driver for Vybrid SoC).
When SPI HW works in this mode - the master is responsible for providing
CS and CLK signals. However, when some fault happens - like for example
distortion on SPI lines - the SPI Linux driver needs a chance to recover
from this abnormal situation and prepare itself for next (correct)
transmission.
This change doesn't pose any threat on drivers working in master mode as
spi_slave_abort() function checks if SPI slave mode is supported.
Signed-off-by: Lukasz Majewski <lukma@...x.de>
Link: https://lore.kernel.org/r/20190924110547.14770-2-lukma@denx.de
Signed-off-by: Mark Brown <broonie@...nel.org>
Reported-by: kbuild test robot <lkp@...el.com>
---
Changes for v2:
- Add #ifdef CONFIG_SPI_SLAVE to not compile in spi_slave_abort() on systems
which are only using master mode.
(The spi_slave_abort() is 'protected' by this Kconfig define in drivers/spi.c
file).
This error was spotted by kbuild test robot from Intel.
---
drivers/spi/spidev.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 255786f2e844..3ea9d8a3e6e8 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -627,6 +627,9 @@ static int spidev_release(struct inode *inode, struct file *filp)
if (dofree)
kfree(spidev);
}
+#ifdef CONFIG_SPI_SLAVE
+ spi_slave_abort(spidev->spi);
+#endif
mutex_unlock(&device_list_lock);
return 0;
--
2.20.1
Powered by blists - more mailing lists