linux-kernel - [PATCH v2 01/17] staging: qlge: Fix irq masking in INTx mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190927101210.23856-2-bpoirier@suse.com>
Date:   Fri, 27 Sep 2019 19:11:55 +0900
From:   Benjamin Poirier <bpoirier@...e.com>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc:     Manish Chopra <manishc@...vell.com>, GR-Linux-NIC-Dev@...vell.com,
        netdev@...r.kernel.org, devel@...verdev.osuosl.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH v2 01/17] staging: qlge: Fix irq masking in INTx mode

Tracing the driver operation reveals that the INTR_EN_EN bit (per-queue
interrupt control) does not immediately prevent rx completion interrupts
when the device is operating in INTx mode. This leads to interrupts being
raised while napi is scheduled/running. Those interrupts are ignored by
qlge_isr() and falsely reported as IRQ_NONE thanks to the irq_cnt scheme.
This in turn can cause frames to loiter in the receive queue until a later
frame leads to another rx interrupt that will schedule napi.

Use the INTR_EN_EI bit (master interrupt control) instead.

Signed-off-by: Benjamin Poirier <bpoirier@...e.com>
---
 drivers/staging/qlge/qlge_main.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/staging/qlge/qlge_main.c b/drivers/staging/qlge/qlge_main.c
index 6cae33072496..d7b64d360ea8 100644
--- a/drivers/staging/qlge/qlge_main.c
+++ b/drivers/staging/qlge/qlge_main.c
@@ -3366,6 +3366,7 @@ static void ql_enable_msix(struct ql_adapter *qdev)
 		}
 	}
 	qlge_irq_type = LEG_IRQ;
+	set_bit(QL_LEGACY_ENABLED, &qdev->flags);
 	netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
 		     "Running with legacy interrupts.\n");
 }
@@ -3509,6 +3510,16 @@ static void ql_resolve_queues_to_irqs(struct ql_adapter *qdev)
 		intr_context->intr_dis_mask =
 		    INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK |
 		    INTR_EN_TYPE_DISABLE;
+		if (test_bit(QL_LEGACY_ENABLED, &qdev->flags)) {
+			/* Experience shows that when using INTx interrupts,
+			 * the device does not always auto-mask INTR_EN_EN.
+			 * Moreover, masking INTR_EN_EN manually does not
+			 * immediately prevent interrupt generation.
+			 */
+			intr_context->intr_en_mask |= INTR_EN_EI << 16 |
+				INTR_EN_EI;
+			intr_context->intr_dis_mask |= INTR_EN_EI << 16;
+		}
 		intr_context->intr_read_mask =
 		    INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK | INTR_EN_TYPE_READ;
 		/*
-- 
2.23.0