| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190927020253.GA11183@jamwan02-TSP300>
Date: Fri, 27 Sep 2019 02:02:59 +0000
From: "james qian wang (Arm Technology China)" <james.qian.wang@....com>
To: Liviu Dudau <Liviu.Dudau@....com>
CC: "Lowry Li (Arm Technology China)" <Lowry.Li@....com>,
"maarten.lankhorst@...ux.intel.com"
<maarten.lankhorst@...ux.intel.com>,
"seanpaul@...omium.org" <seanpaul@...omium.org>,
"airlied@...ux.ie" <airlied@...ux.ie>,
Brian Starkey <Brian.Starkey@....com>,
Mihail Atanassov <Mihail.Atanassov@....com>,
"Julien Yin (Arm Technology China)" <Julien.Yin@....com>,
"Jonathan Chai (Arm Technology China)" <Jonathan.Chai@....com>,
Ayan Halder <Ayan.Halder@....com>,
"dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
nd <nd@....com>
Subject: Re: [PATCH v2 1/2] drm/komeda: Add line size support
On Thu, Sep 26, 2019 at 11:51:21AM +0000, Liviu Dudau wrote:
> On Thu, Sep 26, 2019 at 10:00:22AM +0000, Lowry Li (Arm Technology China) wrote:
> > Hi Lowry,
> > On Wed, Sep 25, 2019 at 10:24:58AM +0000, Liviu Dudau wrote:
> > > Hi Lowry,
> > >
> > > On Tue, Sep 24, 2019 at 08:00:44AM +0000, Lowry Li (Arm Technology China) wrote:
> > > > From: "Lowry Li (Arm Technology China)" <Lowry.Li@....com>
> > > >
> > > > On D71, we are using the global line size. From D32, every
> > > > component have a line size register to indicate the fifo size.
> > > >
> > > > So this patch is to set line size support and do the line size
> > > > check.
> > > >
> > > > Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@....com>
> > > > ---
> > > > .../arm/display/komeda/d71/d71_component.c | 57 ++++++++++++++++---
> > > > .../gpu/drm/arm/display/komeda/d71/d71_regs.h | 9 +--
> > > > .../drm/arm/display/komeda/komeda_pipeline.h | 2 +
> > > > .../display/komeda/komeda_pipeline_state.c | 17 ++++++
> > > > 4 files changed, 70 insertions(+), 15 deletions(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c b/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
> > > > index 7b374a3b911e..357837b9d6ed 100644
> > > > --- a/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
> > > > +++ b/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
> > > > @@ -106,6 +106,23 @@ static void dump_block_header(struct seq_file *sf, void __iomem *reg)
> > > > i, hdr.output_ids[i]);
> > > > }
> > > >
> > > > +/* On D71, we are using the global line size. From D32, every component have
> > > > + * a line size register to indicate the fifo size.
> > > > + */
> > > > +static u32 __get_blk_line_size(struct d71_dev *d71, u32 __iomem *reg,
> > > > + u32 max_default)
> > > > +{
> > > > + if (!d71->periph_addr)
> > > > + max_default = malidp_read32(reg, BLK_MAX_LINE_SIZE);
> > > > +
> > > > + return max_default;
> > > > +}
> > > > +
> > > > +static u32 get_blk_line_size(struct d71_dev *d71, u32 __iomem *reg)
> > > > +{
> > > > + return __get_blk_line_size(d71, reg, d71->max_line_size);
> > > > +}
> > >
> > > I know you're trying to save typing the extra parameter, but looking at the rest of
> > > the diff I think it would look better if you get rid of get_blk_line_size() function
> > > and use the name for the function with 3 parameters.
> > >
> > > Otherwise, patch looks good to me.
> > >
> > > Reviewed-by: Liviu Dudau <liviu.dudau@....com>
> > >
> > > Best regards,
> > > Liviu
> > Thanks for the comments.
> > But considering from D32 every component have a line size register
> > and no need default value, so we have get_blk_line_size() without
> > default argument and also can save some typing and lines. That's
> > why we want to keep __get_blk_line_size().
>
> I was suggesting to remove get_blk_line_size and only use __get_blk_line_size() with
> explicit use of d71->max_line_size where it makes sense.
>
Hi Liviu:
Thank you for the suggestion.
Seems lowry doesn't describe it clearly.
the stroy is like this, for current komeda products:
- D71: Doesn't have per component line_size register to indicate the
fifo size.
And the fifo size is quite customized for every component,
Alought for HW it is just a const value. but since it doesn't exposed
to SW. So for driver It's quite annoy&hard to judage via lots of hints.
- D32 or newer: have line_size register.
So for compatible with these two class products, we defined two functions:
- __get_blk_line_size():
for d71 specific component like spliter/merger, that's why here we
need input a default line_size, since all d71 specific component
doesn't have its own line_size register or can not be indicated via
the register GCU->line_size.
Need to set it manually according to the specific component and lots
of hints.
- get_blk_line_size():
Two cases:
-- d32 or newer: which have its own fifo line_size register
-- d71: the line_size always same as the GCU->line_size
register (the d71->max_line_size)
So last as a conclusion:
- get_blk_line_size():
is for the component that line_size can be indicated by HW line_size register,
no matter component->line_size or GCU->line_size.
- __get_blk_line_size():
for the d71 specific componet that needs manually calculate the line_size.
Thanks
James
> Best regards,
> Liviu
>
> >
> > > > +
> > > > static u32 to_rot_ctrl(u32 rot)
> > > > {
> > > > u32 lr_ctrl = 0;
> > > > @@ -365,7 +382,28 @@ static int d71_layer_init(struct d71_dev *d71,
> > > > else
> > > > layer->layer_type = KOMEDA_FMT_SIMPLE_LAYER;
> > > >
> > > > - set_range(&layer->hsize_in, 4, d71->max_line_size);
> > > > + if (!d71->periph_addr) {
> > > > + /* D32 or newer product */
> > > > + layer->line_sz = malidp_read32(reg, BLK_MAX_LINE_SIZE);
> > > > + layer->yuv_line_sz = L_INFO_YUV_MAX_LINESZ(layer_info);
> > > > + } else if (d71->max_line_size > 2048) {
> > > > + /* D71 4K */
> > > > + layer->line_sz = d71->max_line_size;
> > > > + layer->yuv_line_sz = layer->line_sz / 2;
> > > > + } else {
> > > > + /* D71 2K */
> > > > + if (layer->layer_type == KOMEDA_FMT_RICH_LAYER) {
> > > > + /* rich layer is 4K configuration */
> > > > + layer->line_sz = d71->max_line_size * 2;
> > > > + layer->yuv_line_sz = layer->line_sz / 2;
> > > > + } else {
> > > > + layer->line_sz = d71->max_line_size;
> > > > + layer->yuv_line_sz = 0;
> > > > + }
> > > > + }
> > > > +
> > > > + set_range(&layer->hsize_in, 4, layer->line_sz);
> > > > +
> > > > set_range(&layer->vsize_in, 4, d71->max_vsize);
> > > >
> > > > malidp_write32(reg, LAYER_PALPHA, D71_PALPHA_DEF_MAP);
> > > > @@ -456,9 +494,11 @@ static int d71_wb_layer_init(struct d71_dev *d71,
> > > >
> > > > wb_layer = to_layer(c);
> > > > wb_layer->layer_type = KOMEDA_FMT_WB_LAYER;
> > > > + wb_layer->line_sz = get_blk_line_size(d71, reg);
> > > > + wb_layer->yuv_line_sz = wb_layer->line_sz;
> > > >
> > > > - set_range(&wb_layer->hsize_in, D71_MIN_LINE_SIZE, d71->max_line_size);
> > > > - set_range(&wb_layer->vsize_in, D71_MIN_VERTICAL_SIZE, d71->max_vsize);
> > > > + set_range(&wb_layer->hsize_in, 64, wb_layer->line_sz);
> > > > + set_range(&wb_layer->vsize_in, 64, d71->max_vsize);
> > > >
> > > > return 0;
> > > > }
> > > > @@ -595,8 +635,8 @@ static int d71_compiz_init(struct d71_dev *d71,
> > > >
> > > > compiz = to_compiz(c);
> > > >
> > > > - set_range(&compiz->hsize, D71_MIN_LINE_SIZE, d71->max_line_size);
> > > > - set_range(&compiz->vsize, D71_MIN_VERTICAL_SIZE, d71->max_vsize);
> > > > + set_range(&compiz->hsize, 64, get_blk_line_size(d71, reg));
> > > > + set_range(&compiz->vsize, 64, d71->max_vsize);
> > > >
> > > > return 0;
> > > > }
> > > > @@ -753,7 +793,7 @@ static int d71_scaler_init(struct d71_dev *d71,
> > > > }
> > > >
> > > > scaler = to_scaler(c);
> > > > - set_range(&scaler->hsize, 4, 2048);
> > > > + set_range(&scaler->hsize, 4, __get_blk_line_size(d71, reg, 2048));
> > > > set_range(&scaler->vsize, 4, 4096);
> > > > scaler->max_downscaling = 6;
> > > > scaler->max_upscaling = 64;
> > > > @@ -862,7 +902,7 @@ static int d71_splitter_init(struct d71_dev *d71,
> > > >
> > > > splitter = to_splitter(c);
> > > >
> > > > - set_range(&splitter->hsize, 4, d71->max_line_size);
> > > > + set_range(&splitter->hsize, 4, get_blk_line_size(d71, reg));
> > > > set_range(&splitter->vsize, 4, d71->max_vsize);
> > > >
> > > > return 0;
> > > > @@ -933,7 +973,8 @@ static int d71_merger_init(struct d71_dev *d71,
> > > >
> > > > merger = to_merger(c);
> > > >
> > > > - set_range(&merger->hsize_merged, 4, 4032);
> > > > + set_range(&merger->hsize_merged, 4,
> > > > + __get_blk_line_size(d71, reg, 4032));
> > > > set_range(&merger->vsize_merged, 4, 4096);
> > > >
> > > > return 0;
> > > > diff --git a/drivers/gpu/drm/arm/display/komeda/d71/d71_regs.h b/drivers/gpu/drm/arm/display/komeda/d71/d71_regs.h
> > > > index 2d5e6d00b42c..1727dc993909 100644
> > > > --- a/drivers/gpu/drm/arm/display/komeda/d71/d71_regs.h
> > > > +++ b/drivers/gpu/drm/arm/display/komeda/d71/d71_regs.h
> > > > @@ -10,6 +10,7 @@
> > > > /* Common block registers offset */
> > > > #define BLK_BLOCK_INFO 0x000
> > > > #define BLK_PIPELINE_INFO 0x004
> > > > +#define BLK_MAX_LINE_SIZE 0x008
> > > > #define BLK_VALID_INPUT_ID0 0x020
> > > > #define BLK_OUTPUT_ID0 0x060
> > > > #define BLK_INPUT_ID0 0x080
> > > > @@ -321,6 +322,7 @@
> > > > #define L_INFO_RF BIT(0)
> > > > #define L_INFO_CM BIT(1)
> > > > #define L_INFO_ABUF_SIZE(x) (((x) >> 4) & 0x7)
> > > > +#define L_INFO_YUV_MAX_LINESZ(x) (((x) >> 16) & 0xFFFF)
> > > >
> > > > /* Scaler registers */
> > > > #define SC_COEFFTAB 0x0DC
> > > > @@ -494,13 +496,6 @@ enum d71_blk_type {
> > > > #define D71_DEFAULT_PREPRETCH_LINE 5
> > > > #define D71_BUS_WIDTH_16_BYTES 16
> > > >
> > > > -#define D71_MIN_LINE_SIZE 64
> > > > -#define D71_MIN_VERTICAL_SIZE 64
> > > > -#define D71_SC_MIN_LIN_SIZE 4
> > > > -#define D71_SC_MIN_VERTICAL_SIZE 4
> > > > -#define D71_SC_MAX_LIN_SIZE 2048
> > > > -#define D71_SC_MAX_VERTICAL_SIZE 4096
> > > > -
> > > > #define D71_SC_MAX_UPSCALING 64
> > > > #define D71_SC_MAX_DOWNSCALING 6
> > > > #define D71_SC_SPLIT_OVERLAP 8
> > > > diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h
> > > > index 910d279ae48d..92aba58ce2a5 100644
> > > > --- a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h
> > > > +++ b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h
> > > > @@ -227,6 +227,8 @@ struct komeda_layer {
> > > > /* accepted h/v input range before rotation */
> > > > struct malidp_range hsize_in, vsize_in;
> > > > u32 layer_type; /* RICH, SIMPLE or WB */
> > > > + u32 line_sz;
> > > > + u32 yuv_line_sz; /* maximum line size for YUV422 and YUV420 */
> > > > u32 supported_rots;
> > > > /* komeda supports layer split which splits a whole image to two parts
> > > > * left and right and handle them by two individual layer processors
> > > > diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
> > > > index 5526731f5a33..6df442666cfe 100644
> > > > --- a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
> > > > +++ b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
> > > > @@ -285,6 +285,7 @@ komeda_layer_check_cfg(struct komeda_layer *layer,
> > > > struct komeda_data_flow_cfg *dflow)
> > > > {
> > > > u32 src_x, src_y, src_w, src_h;
> > > > + u32 line_sz, max_line_sz;
> > > >
> > > > if (!komeda_fb_is_layer_supported(kfb, layer->layer_type, dflow->rot))
> > > > return -EINVAL;
> > > > @@ -314,6 +315,22 @@ komeda_layer_check_cfg(struct komeda_layer *layer,
> > > > return -EINVAL;
> > > > }
> > > >
> > > > + if (drm_rotation_90_or_270(dflow->rot))
> > > > + line_sz = dflow->in_h;
> > > > + else
> > > > + line_sz = dflow->in_w;
> > > > +
> > > > + if (kfb->base.format->hsub > 1)
> > > > + max_line_sz = layer->yuv_line_sz;
> > > > + else
> > > > + max_line_sz = layer->line_sz;
> > > > +
> > > > + if (line_sz > max_line_sz) {
> > > > + DRM_DEBUG_ATOMIC("Required line_sz: %d exceeds the max size %d\n",
> > > > + line_sz, max_line_sz);
> > > > + return -EINVAL;
> > > > + }
> > > > +
> > > > return 0;
> > > > }
> > > >
> > > > --
> > > > 2.17.1
> > > >
> > >
> > > --
> > > ====================
> > > | I would like to |
> > > | fix the world, |
> > > | but they're not |
> > > | giving me the |
> > > \ source code! /
> > > ---------------
> > > ¯\_(ツ)_/¯
>
> --
> ====================
> | I would like to |
> | fix the world, |
> | but they're not |
> | giving me the |
> \ source code! /
> ---------------
> ¯\_(ツ)_/¯
Powered by blists - more mailing lists