[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191001180703.910-1-geert+renesas@glider.be>
Date: Tue, 1 Oct 2019 20:07:03 +0200
From: Geert Uytterhoeven <geert+renesas@...der.be>
To: Ulf Hansson <ulf.hansson@...aro.org>,
Wolfram Sang <wsa+renesas@...g-engineering.com>
Cc: Stephen Boyd <swboyd@...omium.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-renesas-soc@...r.kernel.org, linux-mmc@...r.kernel.org,
linux-kernel@...r.kernel.org,
Geert Uytterhoeven <geert+renesas@...der.be>
Subject: [PATCH] mmc: renesas_sdhi: Do not use platform_get_irq() to count interrupts
As platform_get_irq() now prints an error when the interrupt does not
exist, counting interrupts by looping until failure causes the printing
of scary messages like:
renesas_sdhi_internal_dmac ee140000.sd: IRQ index 1 not found
Fix this by using the platform_irq_count() helper to avoid touching
non-existent interrupts.
Fixes: 7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@...der.be>
---
This is a fix for v5.4-rc1.
---
drivers/mmc/host/renesas_sdhi_core.c | 26 ++++++++++++++------------
1 file changed, 14 insertions(+), 12 deletions(-)
diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index d4ada5cca2d14f6a..122f429602d825bd 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -646,8 +646,8 @@ int renesas_sdhi_probe(struct platform_device *pdev,
struct tmio_mmc_dma *dma_priv;
struct tmio_mmc_host *host;
struct renesas_sdhi *priv;
+ int num_irqs, irq, ret, i;
struct resource *res;
- int irq, ret, i;
u16 ver;
of_data = of_device_get_match_data(&pdev->dev);
@@ -825,24 +825,26 @@ int renesas_sdhi_probe(struct platform_device *pdev,
host->hs400_complete = renesas_sdhi_hs400_complete;
}
- i = 0;
- while (1) {
+ /* There must be at least one IRQ source */
+ num_irqs = platform_irq_count(pdev);
+ if (num_irqs < 1) {
+ ret = num_irqs;
+ goto eirq;
+ }
+
+ for (i = 0; i < num_irqs; i++) {
irq = platform_get_irq(pdev, i);
- if (irq < 0)
- break;
- i++;
+ if (irq < 0) {
+ ret = irq;
+ goto eirq;
+ }
+
ret = devm_request_irq(&pdev->dev, irq, tmio_mmc_irq, 0,
dev_name(&pdev->dev), host);
if (ret)
goto eirq;
}
- /* There must be at least one IRQ source */
- if (!i) {
- ret = irq;
- goto eirq;
- }
-
dev_info(&pdev->dev, "%s base at 0x%08lx max clock rate %u MHz\n",
mmc_hostname(host->mmc), (unsigned long)
(platform_get_resource(pdev, IORESOURCE_MEM, 0)->start),
--
2.17.1
Powered by blists - more mailing lists