| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20191001095032.4uxaw3k45afvyp4j@verge.net.au>
Date: Tue, 1 Oct 2019 11:50:33 +0200
From: Simon Horman <horms@...ge.net.au>
To: Haishuang Yan <yanhaishuang@...s.chinamobile.com>
Cc: Shuah Khan <shuah@...nel.org>,
Pablo Neira Ayuso <pablo@...filter.org>,
"David S. Miller" <davem@...emloft.net>,
Julian Anastasov <ja@....bg>, linux-kernel@...r.kernel.org,
linux-kselftest@...r.kernel.org, lvs-devel@...r.kernel.org,
netfilter-devel@...r.kernel.org
Subject: Re: [PATCH v2 1/3] selftests: netfilter: add ipvs test script
On Fri, Sep 27, 2019 at 02:21:04PM +0800, Haishuang Yan wrote:
> Test virutal server via directing routing for IPv4.
>
> Tested:
>
> # selftests: netfilter: ipvs.sh
> # Testing DR mode...
> # ipvs.sh: PASS
> ok 6 selftests: netfilter: ipvs.sh
>
> Signed-off-by: Haishuang Yan <yanhaishuang@...s.chinamobile.com>
> ---
> v2: optimize test script
> ---
> tools/testing/selftests/netfilter/Makefile | 2 +-
> tools/testing/selftests/netfilter/ipvs.sh | 184 +++++++++++++++++++++++++++++
> 2 files changed, 185 insertions(+), 1 deletion(-)
> create mode 100755 tools/testing/selftests/netfilter/ipvs.sh
>
> diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile
> index 4144984..de1032b 100644
> --- a/tools/testing/selftests/netfilter/Makefile
> +++ b/tools/testing/selftests/netfilter/Makefile
> @@ -2,6 +2,6 @@
> # Makefile for netfilter selftests
>
> TEST_PROGS := nft_trans_stress.sh nft_nat.sh bridge_brouter.sh \
> - conntrack_icmp_related.sh nft_flowtable.sh
> + conntrack_icmp_related.sh nft_flowtable.sh ipvs.sh
>
> include ../lib.mk
> diff --git a/tools/testing/selftests/netfilter/ipvs.sh b/tools/testing/selftests/netfilter/ipvs.sh
> new file mode 100755
> index 0000000..658c06b
> --- /dev/null
> +++ b/tools/testing/selftests/netfilter/ipvs.sh
> @@ -0,0 +1,184 @@
> +#!/bin/sh
> +# SPDX-License-Identifier: GPL-2.0
> +#
> +# End-to-end ipvs test suite
> +# Topology:
> +#--------------------------------------------------------------+
> +# | |
> +# ns0 | ns1 |
> +# ----------- | ----------- ----------- |
> +# | veth01 | --------- | veth10 | | veth12 | |
> +# ----------- peer ----------- ----------- |
> +# | | | |
> +# ----------- | | |
> +# | br0 | |----------------- peer |--------------|
> +# ----------- | | |
> +# | | | |
> +# ---------- peer ---------- ----------- |
> +# | veth02 | --------- | veth20 | | veth21 | |
> +# ---------- | ---------- ----------- |
> +# | ns2 |
> +# | |
> +#--------------------------------------------------------------+
> +#
> +# We assume that all network driver are loaded
> +#
> +
> +# Kselftest framework requirement - SKIP code is 4.
> +ksft_skip=4
> +ret=0
> +GREEN='\033[0;92m'
> +RED='\033[0;31m'
> +NC='\033[0m' # No Color
> +
> +readonly port=8080
> +
> +readonly vip_v4=207.175.44.110
> +readonly cip_v4=10.0.0.2
> +readonly gip_v4=10.0.0.1
> +readonly dip_v4=172.16.0.1
> +readonly rip_v4=172.16.0.2
> +readonly sip_v4=10.0.0.3
> +
> +readonly infile="$(mktemp)"
> +readonly outfile="$(mktemp)"
> +
> +sysipvsnet=/proc/sys/net/ipv4/vs/
> +if [ ! -d /proc/sys/net/ipv4/vs/ ]; then
> + modprobe -q ip_vs
> + if [ $? -ne 0 ]; then
> + echo "SKIP: Could not run test without ipvs module"
> + exit $ksft_skip
> + fi
> +fi
> +
> +ip -Version > /dev/null 2>&1
> +if [ $? -ne 0 ]; then
> + echo "SKIP: Could not run test without ip tool"
> + exit $ksft_skip
> +fi
> +
> +ipvsadm -v > /dev/null 2>&1
> +if [ $? -ne 0 ]; then
> + echo "SKIP: Could not run test without ipvsadm"
> + exit $ksft_skip
> +fi
> +
> +nc --version > /dev/null 2>&1
> +if [ $? -ne 0 ]; then
> + echo "SKIP: Could not run test without ncat"
> + exit $ksft_skip
> +fi
> +
> +setup() {
> + ip netns add ns0
> + ip netns add ns1
> + ip netns add ns2
> +
> + ip link add veth01 netns ns0 type veth peer name veth10 netns ns1
> + ip link add veth02 netns ns0 type veth peer name veth20 netns ns2
> + ip link add veth12 netns ns1 type veth peer name veth21 netns ns2
> +
> + ip netns exec ns0 ip link set veth01 up
> + ip netns exec ns0 ip link set veth02 up
> + ip netns exec ns0 ip link add br0 type bridge
> + ip netns exec ns0 ip link set veth01 master br0
> + ip netns exec ns0 ip link set veth02 master br0
> + ip netns exec ns0 ip link set br0 up
> + ip netns exec ns0 ip addr add ${cip_v4}/24 dev br0
> +
> + ip netns exec ns1 ip link set lo up
> + ip netns exec ns1 ip link set veth10 up
> + ip netns exec ns1 ip addr add ${gip_v4}/24 dev veth10
> + ip netns exec ns1 ip link set veth12 up
> + ip netns exec ns1 ip addr add ${dip_v4}/24 dev veth12
> +
> + ip netns exec ns2 ip link set lo up
> + ip netns exec ns2 ip link set veth21 up
> + ip netns exec ns2 ip addr add ${rip_v4}/24 dev veth21
> + ip netns exec ns2 ip link set veth20 up
> + ip netns exec ns2 ip addr add ${sip_v4}/24 dev veth20
> +}
> +
> +cleanup() {
> + for i in 0 1 2
> + do
> + ip netns del ns$i > /dev/null 2>&1
> + done
> + pkill nc
> +}
> +
> +server_listen() {
> + ip netns exec ns2 nc -l -p 8080 > "${outfile}" &
> + server_pid=$!
> + sleep 0.2
> +}
> +
> +client_connect() {
> + ip netns exec ns0 timeout 2 nc -w 1 ${vip_v4} ${port} < "${infile}"
> +}
> +
> +verify_data() {
> + wait "${server_pid}"
> + # sha1sum returns two fields [sha1] [filepath]
> + # convert to bash array and access first elem
> + insum=($(sha1sum ${infile}))
When /bin/sh is dash the line above results in an error
./ipvs.sh: 125: ./ipvs.sh: Syntax error: "(" unexpected (expecting "}")
Could you work on making the script free of bashisms.
Or, if that proves to be an exceisive burden, use #!/bin/bash
Thanks!
> + outsum=($(sha1sum ${outfile}))
> + if [[ "${insum[0]}" != "${outsum[0]}" ]]; then
> + echo "data mismatch"
> + exit 1
> + fi
> +}
> +
> +test_service() {
> + server_listen
> + client_connect
> + ret=$?
> + if [ $ret -ne 0 ]; then
> + return $ret
> + fi
> + verify_data
> +}
> +
> +
> +test_dr() {
> + ip netns exec ns0 ip route add ${vip_v4} via ${gip_v4} dev br0
> +
> + ip netns exec ns1 sysctl -qw net.ipv4.ip_forward=1
> + ip netns exec ns1 ipvsadm -A -t ${vip_v4}:${port} -s rr
> + ip netns exec ns1 ipvsadm -a -t ${vip_v4}:${port} -r ${rip_v4}:${port}
> + ip netns exec ns1 ip addr add ${vip_v4}/32 dev lo:1
> +
> + # avoid incorrect arp response
> + ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_ignore=1
> + ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_announce=2
> + # avoid reverse route lookup
> + ip netns exec ns2 sysctl -qw net.ipv4.conf.all.rp_filter=0
> + ip netns exec ns2 sysctl -qw net.ipv4.conf.veth21.rp_filter=0
> + ip netns exec ns2 ip addr add ${vip_v4}/32 dev lo:1
> +
> + test_service
> +}
> +
> +run_tests() {
> + local errors=
> +
> + echo "Testing DR mode..."
> + setup
> + test_dr
> + errors=$(( $errors + $? ))
> +
> + return $errors
> +}
> +
> +trap cleanup EXIT
> +
> +cleanup
> +run_tests
> +
> +if [ $? -ne 0 ]; then
> + echo -e "$(basename $0): ${RED}FAIL${NC}"
> + exit 1
> +fi
> +echo -e "$(basename $0): ${GREEN}PASS${NC}"
> +exit 0
> --
> 1.8.3.1
>
>
>
Powered by blists - more mailing lists