lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20191001155154.99710-1-alpawi@amazon.com>
Date:   Tue, 1 Oct 2019 10:51:38 -0500
From:   Patrick Williams <alpawi@...zon.com>
To:     unlisted-recipients:; (no To-header on input)
CC:     Patrick Williams <alpawi@...zon.com>,
        Patrick Williams <patrick@...cx.xyz>, <stable@...r.kernel.org>,
        Jason Cooper <jason@...edaemon.net>,
        Andrew Lunn <andrew@...n.ch>,
        Gregory Clement <gregory.clement@...tlin.com>,
        Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
        Linus Walleij <linus.walleij@...aro.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-gpio@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH] pinctrl: armada-37xx: swap polarity on LED group

The configuration registers for the LED group have inverted
polarity, which puts the GPIO into open-drain state when used in
GPIO mode.  Switch to '0' for GPIO and '1' for LED modes.

Fixes: 87466ccd9401 ("pinctrl: armada-37xx: Add pin controller support for Armada 37xx")
Signed-off-by: Patrick Williams <alpawi@...zon.com>
Cc: <stable@...r.kernel.org>
---
 drivers/pinctrl/mvebu/pinctrl-armada-37xx.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
index 6462d3ca7ceb..6310963ce5f0 100644
--- a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
+++ b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
@@ -183,10 +183,10 @@ static struct armada_37xx_pin_group armada_37xx_nb_groups[] = {
 	PIN_GRP_EXTRA("uart2", 9, 2, BIT(1) | BIT(13) | BIT(14) | BIT(19),
 		      BIT(1) | BIT(13) | BIT(14), BIT(1) | BIT(19),
 		      18, 2, "gpio", "uart"),
-	PIN_GRP_GPIO("led0_od", 11, 1, BIT(20), "led"),
-	PIN_GRP_GPIO("led1_od", 12, 1, BIT(21), "led"),
-	PIN_GRP_GPIO("led2_od", 13, 1, BIT(22), "led"),
-	PIN_GRP_GPIO("led3_od", 14, 1, BIT(23), "led"),
+	PIN_GRP_GPIO_2("led0_od", 11, 1, BIT(20), BIT(20), 0, "led"),
+	PIN_GRP_GPIO_2("led1_od", 12, 1, BIT(21), BIT(21), 0, "led"),
+	PIN_GRP_GPIO_2("led2_od", 13, 1, BIT(22), BIT(22), 0, "led"),
+	PIN_GRP_GPIO_2("led3_od", 14, 1, BIT(23), BIT(23), 0, "led"),
 
 };
 
-- 
2.17.2 (Apple Git-113)

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ