| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20191002085759.13337-2-brgl@bgdev.pl>
Date: Wed, 2 Oct 2019 10:57:56 +0200
From: Bartosz Golaszewski <brgl@...ev.pl>
To: Jonathan Cameron <jic23@...nel.org>,
Hartmut Knaack <knaack.h@....de>,
Lars-Peter Clausen <lars@...afoo.de>,
Peter Meerwald-Stadler <pmeerw@...erw.net>
Cc: linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
Bartosz Golaszewski <bgolaszewski@...libre.com>
Subject: [PATCH 1/4] iio: pressure: bmp280: use bulk regulator ops
From: Bartosz Golaszewski <bgolaszewski@...libre.com>
The vddd and vdda supplies are always operated on together. We can
shrink the code a bit by using the bulk regulator helpers.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@...libre.com>
---
drivers/iio/pressure/bmp280-core.c | 69 +++++++++++++-----------------
1 file changed, 30 insertions(+), 39 deletions(-)
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index 8d0f15f27dc5..c21f8ce7b09c 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -74,6 +74,12 @@ struct bmp280_calib {
s8 H6;
};
+static const char *const bmp280_supply_names[] = {
+ "vddd", "vdda"
+};
+
+#define BMP280_NUM_SUPPLIES ARRAY_SIZE(bmp280_supply_names)
+
struct bmp280_data {
struct device *dev;
struct mutex lock;
@@ -85,8 +91,7 @@ struct bmp280_data {
struct bmp180_calib bmp180;
struct bmp280_calib bmp280;
} calib;
- struct regulator *vddd;
- struct regulator *vdda;
+ struct regulator_bulk_data supplies[BMP280_NUM_SUPPLIES];
unsigned int start_up_time; /* in microseconds */
/* log of base 2 of oversampling rate */
@@ -1033,27 +1038,23 @@ int bmp280_common_probe(struct device *dev,
}
/* Bring up regulators */
- data->vddd = devm_regulator_get(dev, "vddd");
- if (IS_ERR(data->vddd)) {
- dev_err(dev, "failed to get VDDD regulator\n");
- return PTR_ERR(data->vddd);
- }
- ret = regulator_enable(data->vddd);
+ regulator_bulk_set_supply_names(data->supplies,
+ bmp280_supply_names,
+ BMP280_NUM_SUPPLIES);
+
+ ret = devm_regulator_bulk_get(dev,
+ BMP280_NUM_SUPPLIES, data->supplies);
if (ret) {
- dev_err(dev, "failed to enable VDDD regulator\n");
+ dev_err(dev, "failed to get regulators\n");
return ret;
}
- data->vdda = devm_regulator_get(dev, "vdda");
- if (IS_ERR(data->vdda)) {
- dev_err(dev, "failed to get VDDA regulator\n");
- ret = PTR_ERR(data->vdda);
- goto out_disable_vddd;
- }
- ret = regulator_enable(data->vdda);
+
+ ret = regulator_bulk_enable(BMP280_NUM_SUPPLIES, data->supplies);
if (ret) {
- dev_err(dev, "failed to enable VDDA regulator\n");
- goto out_disable_vddd;
+ dev_err(dev, "failed to enable regulators\n");
+ return ret;
}
+
/* Wait to make sure we started up properly */
usleep_range(data->start_up_time, data->start_up_time + 100);
@@ -1068,17 +1069,17 @@ int bmp280_common_probe(struct device *dev,
data->regmap = regmap;
ret = regmap_read(regmap, BMP280_REG_ID, &chip_id);
if (ret < 0)
- goto out_disable_vdda;
+ goto out_disable_regulators;
if (chip_id != chip) {
dev_err(dev, "bad chip id: expected %x got %x\n",
chip, chip_id);
ret = -EINVAL;
- goto out_disable_vdda;
+ goto out_disable_regulators;
}
ret = data->chip_info->chip_config(data);
if (ret < 0)
- goto out_disable_vdda;
+ goto out_disable_regulators;
dev_set_drvdata(dev, indio_dev);
@@ -1092,14 +1093,14 @@ int bmp280_common_probe(struct device *dev,
if (ret < 0) {
dev_err(data->dev,
"failed to read calibration coefficients\n");
- goto out_disable_vdda;
+ goto out_disable_regulators;
}
} else if (chip_id == BMP280_CHIP_ID || chip_id == BME280_CHIP_ID) {
ret = bmp280_read_calib(data, &data->calib.bmp280, chip_id);
if (ret < 0) {
dev_err(data->dev,
"failed to read calibration coefficients\n");
- goto out_disable_vdda;
+ goto out_disable_regulators;
}
}
@@ -1111,7 +1112,7 @@ int bmp280_common_probe(struct device *dev,
if (irq > 0 || (chip_id == BMP180_CHIP_ID)) {
ret = bmp085_fetch_eoc_irq(dev, name, irq, data);
if (ret)
- goto out_disable_vdda;
+ goto out_disable_regulators;
}
/* Enable runtime PM */
@@ -1137,10 +1138,8 @@ int bmp280_common_probe(struct device *dev,
pm_runtime_get_sync(data->dev);
pm_runtime_put_noidle(data->dev);
pm_runtime_disable(data->dev);
-out_disable_vdda:
- regulator_disable(data->vdda);
-out_disable_vddd:
- regulator_disable(data->vddd);
+out_disable_regulators:
+ regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
return ret;
}
EXPORT_SYMBOL(bmp280_common_probe);
@@ -1154,8 +1153,7 @@ int bmp280_common_remove(struct device *dev)
pm_runtime_get_sync(data->dev);
pm_runtime_put_noidle(data->dev);
pm_runtime_disable(data->dev);
- regulator_disable(data->vdda);
- regulator_disable(data->vddd);
+ regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
return 0;
}
EXPORT_SYMBOL(bmp280_common_remove);
@@ -1165,12 +1163,8 @@ static int bmp280_runtime_suspend(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct bmp280_data *data = iio_priv(indio_dev);
- int ret;
- ret = regulator_disable(data->vdda);
- if (ret)
- return ret;
- return regulator_disable(data->vddd);
+ return regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
}
static int bmp280_runtime_resume(struct device *dev)
@@ -1179,10 +1173,7 @@ static int bmp280_runtime_resume(struct device *dev)
struct bmp280_data *data = iio_priv(indio_dev);
int ret;
- ret = regulator_enable(data->vddd);
- if (ret)
- return ret;
- ret = regulator_enable(data->vdda);
+ ret = regulator_bulk_enable(BMP280_NUM_SUPPLIES, data->supplies);
if (ret)
return ret;
usleep_range(data->start_up_time, data->start_up_time + 100);
--
2.23.0
Powered by blists - more mailing lists