[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191002091529.17112-1-jbrunet@baylibre.com>
Date: Wed, 2 Oct 2019 11:15:22 +0200
From: Jerome Brunet <jbrunet@...libre.com>
To: Neil Armstrong <narmstrong@...libre.com>
Cc: Jerome Brunet <jbrunet@...libre.com>,
Kevin Hilman <khilman@...libre.com>,
linux-amlogic@...ts.infradead.org, linux-clk@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v3 0/7] clk: meson: axg-audio: add sm1 support
The purpose of this patchset is to add the sm1 support to the amlogic audio
clock controller. The line count is lot higher than what I hoped for. Even
if extremely similar, there is a shift in the register address on the sm1
which makes a bit of a mess.
I could have patched the address on the fly if running on sm1 but the end
result did not save much lines and would have been a pain to maintain and
scale in the future
Instead I choose to re-arrange the driver to share the macros and declare
separate clocks for the clock which have changed.
Changes since v2 [1]:
- Add missing gate ops for
* sm1_clk81_en
* sm1_sysclk_a_en
* sm1_sysclk_b_en
Changes since v1 [0]:
- Fix newline in the last patch
[0]: https://lkml.kernel.org/r/20190924153356.24103-1-jbrunet@baylibre.com
[1]: https://lkml.kernel.org/r/20191001115511.17357-1-jbrunet@baylibre.com>
Jerome Brunet (7):
dt-bindings: clk: axg-audio: add sm1 bindings
dt-bindings: clock: meson: add sm1 resets to the axg-audio controller
clk: meson: axg-audio: remove useless defines
clk: meson: axg-audio: fix regmap last register
clk: meson: axg-audio: prepare sm1 addition
clk: meson: axg-audio: provide clk top signal name
clk: meson: axg_audio: add sm1 support
.../bindings/clock/amlogic,axg-audio-clkc.txt | 3 +-
drivers/clk/meson/axg-audio.c | 2021 +++++++++++------
drivers/clk/meson/axg-audio.h | 21 +-
include/dt-bindings/clock/axg-audio-clkc.h | 10 +
.../reset/amlogic,meson-g12a-audio-reset.h | 15 +
5 files changed, 1373 insertions(+), 697 deletions(-)
--
2.21.0
Powered by blists - more mailing lists