[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191002114626.12407-1-aford173@gmail.com>
Date: Wed, 2 Oct 2019 06:46:26 -0500
From: Adam Ford <aford173@...il.com>
To: linux-bluetooth@...r.kernel.org
Cc: marcel@...tmann.org, johan.hedberg@...il.com,
linux-kernel@...r.kernel.org, adam.ford@...icpd.com,
sre@...nel.org, Adam Ford <aford173@...il.com>
Subject: [PATCH] Revert "Bluetooth: hci_ll: set operational frequency earlier"
As nice as it would be to update firmware faster, that patch broke
at least two different boards, an OMAP4+WL1285 based Motorola Droid
4, as reported by Sebasian Reichel and the Logic PD i.MX6Q +
WL1837MOD.
This reverts commit a2e02f38eff84f199c8e32359eb213f81f270047.
Signed-off-by: Adam Ford <aford173@...il.com>
diff --git a/drivers/bluetooth/hci_ll.c b/drivers/bluetooth/hci_ll.c
index 285706618f8a..d9a4c6c691e0 100644
--- a/drivers/bluetooth/hci_ll.c
+++ b/drivers/bluetooth/hci_ll.c
@@ -621,13 +621,6 @@ static int ll_setup(struct hci_uart *hu)
serdev_device_set_flow_control(serdev, true);
- if (hu->oper_speed)
- speed = hu->oper_speed;
- else if (hu->proto->oper_speed)
- speed = hu->proto->oper_speed;
- else
- speed = 0;
-
do {
/* Reset the Bluetooth device */
gpiod_set_value_cansleep(lldev->enable_gpio, 0);
@@ -639,20 +632,6 @@ static int ll_setup(struct hci_uart *hu)
return err;
}
- if (speed) {
- __le32 speed_le = cpu_to_le32(speed);
- struct sk_buff *skb;
-
- skb = __hci_cmd_sync(hu->hdev,
- HCI_VS_UPDATE_UART_HCI_BAUDRATE,
- sizeof(speed_le), &speed_le,
- HCI_INIT_TIMEOUT);
- if (!IS_ERR(skb)) {
- kfree_skb(skb);
- serdev_device_set_baudrate(serdev, speed);
- }
- }
-
err = download_firmware(lldev);
if (!err)
break;
@@ -677,7 +656,25 @@ static int ll_setup(struct hci_uart *hu)
}
/* Operational speed if any */
+ if (hu->oper_speed)
+ speed = hu->oper_speed;
+ else if (hu->proto->oper_speed)
+ speed = hu->proto->oper_speed;
+ else
+ speed = 0;
+
+ if (speed) {
+ __le32 speed_le = cpu_to_le32(speed);
+ struct sk_buff *skb;
+ skb = __hci_cmd_sync(hu->hdev, HCI_VS_UPDATE_UART_HCI_BAUDRATE,
+ sizeof(speed_le), &speed_le,
+ HCI_INIT_TIMEOUT);
+ if (!IS_ERR(skb)) {
+ kfree_skb(skb);
+ serdev_device_set_baudrate(serdev, speed);
+ }
+ }
return 0;
}
--
2.17.1
Powered by blists - more mailing lists