[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191002123025.21413-4-miquel.raynal@bootlin.com>
Date: Wed, 2 Oct 2019 14:30:21 +0200
From: Miquel Raynal <miquel.raynal@...tlin.com>
To: Jonathan Cameron <jic23@...nel.org>,
Hartmut Knaack <knaack.h@....de>,
Lars-Peter Clausen <lars@...afoo.de>,
Peter Meerwald-Stadler <pmeerw@...erw.net>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Cc: <devicetree@...r.kernel.org>, linux-iio@...r.kernel.org,
linux-kernel@...r.kernel.org,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
Miquel Raynal <miquel.raynal@...tlin.com>
Subject: [PATCH 3/7] iio: adc: max1027: Reset the device at probe time
All the registers are configured by the driver, let's reset the chip
at probe time, avoiding any conflict with a possible earlier
configuration.
Signed-off-by: Miquel Raynal <miquel.raynal@...tlin.com>
---
drivers/iio/adc/max1027.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/iio/adc/max1027.c b/drivers/iio/adc/max1027.c
index 823223b77a70..f9b473ee6711 100644
--- a/drivers/iio/adc/max1027.c
+++ b/drivers/iio/adc/max1027.c
@@ -466,6 +466,14 @@ static int max1027_probe(struct spi_device *spi)
}
}
+ /* Internal reset */
+ st->reg = MAX1027_RST_REG;
+ ret = spi_write(st->spi, &st->reg, 1);
+ if (ret < 0) {
+ dev_err(&indio_dev->dev, "Failed to reset the ADC\n");
+ return ret;
+ }
+
/* Disable averaging */
st->reg = MAX1027_AVG_REG;
ret = spi_write(st->spi, &st->reg, 1);
--
2.20.1
Powered by blists - more mailing lists