| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAMRc=McpiPT2n2adpUiNGF+iF-gO_B3r7rAGFEA_1YzY0c+6Ww@mail.gmail.com>
Date: Wed, 2 Oct 2019 17:57:30 +0200
From: Bartosz Golaszewski <brgl@...ev.pl>
To: kbuild test robot <lkp@...el.com>
Cc: kbuild-all@...org, Jonathan Cameron <jic23@...nel.org>,
Hartmut Knaack <knaack.h@....de>,
Lars-Peter Clausen <lars@...afoo.de>,
Peter Meerwald-Stadler <pmeerw@...erw.net>,
linux-iio@...r.kernel.org,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Bartosz Golaszewski <bgolaszewski@...libre.com>
Subject: Re: [PATCH 1/4] iio: pressure: bmp280: use bulk regulator ops
śr., 2 paź 2019 o 15:06 kbuild test robot <lkp@...el.com> napisał(a):
>
> Hi Bartosz,
>
> I love your patch! Yet something to improve:
>
> [auto build test ERROR on iio/togreg]
> [cannot apply to v5.4-rc1 next-20191002]
> [if your patch is applied to the wrong git tree, please drop us a note to help
> improve the system. BTW, we also suggest to use '--base' option to specify the
> base tree in git format-patch, please see https://stackoverflow.com/a/37406982]
>
> url: https://github.com/0day-ci/linux/commits/Bartosz-Golaszewski/iio-pressure-bmp280-code-shrink/20191002-194508
> base: https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git togreg
> config: sh-allmodconfig (attached as .config)
> compiler: sh4-linux-gcc (GCC) 7.4.0
> reproduce:
> wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> chmod +x ~/bin/make.cross
> # save the attached .config to linux build tree
> GCC_VERSION=7.4.0 make.cross ARCH=sh
>
> If you fix the issue, kindly add following tag
> Reported-by: kbuild test robot <lkp@...el.com>
>
> All errors (new ones prefixed by >>):
>
> drivers/iio/pressure/bmp280-core.c: In function 'bmp280_common_probe':
> >> drivers/iio/pressure/bmp280-core.c:1041:2: error: implicit declaration of function 'regulator_bulk_set_supply_names'; did you mean 'regulator_bulk_register_supply_alias'? [-Werror=implicit-function-declaration]
> regulator_bulk_set_supply_names(data->supplies,
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> regulator_bulk_register_supply_alias
> cc1: some warnings being treated as errors
>
This function has been introduced in commit d0087e72710c ("regulator:
provide regulator_bulk_set_supply_names()") and released in v5.4-rc1
but it's not present in this tree. In other words: a false positive.
Bart
> vim +1041 drivers/iio/pressure/bmp280-core.c
>
> 986
> 987 int bmp280_common_probe(struct device *dev,
> 988 struct regmap *regmap,
> 989 unsigned int chip,
> 990 const char *name,
> 991 int irq)
> 992 {
> 993 int ret;
> 994 struct iio_dev *indio_dev;
> 995 struct bmp280_data *data;
> 996 unsigned int chip_id;
> 997 struct gpio_desc *gpiod;
> 998
> 999 indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
> 1000 if (!indio_dev)
> 1001 return -ENOMEM;
> 1002
> 1003 data = iio_priv(indio_dev);
> 1004 mutex_init(&data->lock);
> 1005 data->dev = dev;
> 1006
> 1007 indio_dev->dev.parent = dev;
> 1008 indio_dev->name = name;
> 1009 indio_dev->channels = bmp280_channels;
> 1010 indio_dev->info = &bmp280_info;
> 1011 indio_dev->modes = INDIO_DIRECT_MODE;
> 1012
> 1013 switch (chip) {
> 1014 case BMP180_CHIP_ID:
> 1015 indio_dev->num_channels = 2;
> 1016 data->chip_info = &bmp180_chip_info;
> 1017 data->oversampling_press = ilog2(8);
> 1018 data->oversampling_temp = ilog2(1);
> 1019 data->start_up_time = 10000;
> 1020 break;
> 1021 case BMP280_CHIP_ID:
> 1022 indio_dev->num_channels = 2;
> 1023 data->chip_info = &bmp280_chip_info;
> 1024 data->oversampling_press = ilog2(16);
> 1025 data->oversampling_temp = ilog2(2);
> 1026 data->start_up_time = 2000;
> 1027 break;
> 1028 case BME280_CHIP_ID:
> 1029 indio_dev->num_channels = 3;
> 1030 data->chip_info = &bme280_chip_info;
> 1031 data->oversampling_press = ilog2(16);
> 1032 data->oversampling_humid = ilog2(16);
> 1033 data->oversampling_temp = ilog2(2);
> 1034 data->start_up_time = 2000;
> 1035 break;
> 1036 default:
> 1037 return -EINVAL;
> 1038 }
> 1039
> 1040 /* Bring up regulators */
> > 1041 regulator_bulk_set_supply_names(data->supplies,
> 1042 bmp280_supply_names,
> 1043 BMP280_NUM_SUPPLIES);
> 1044
> 1045 ret = devm_regulator_bulk_get(dev,
> 1046 BMP280_NUM_SUPPLIES, data->supplies);
> 1047 if (ret) {
> 1048 dev_err(dev, "failed to get regulators\n");
> 1049 return ret;
> 1050 }
> 1051
> 1052 ret = regulator_bulk_enable(BMP280_NUM_SUPPLIES, data->supplies);
> 1053 if (ret) {
> 1054 dev_err(dev, "failed to enable regulators\n");
> 1055 return ret;
> 1056 }
> 1057
> 1058 /* Wait to make sure we started up properly */
> 1059 usleep_range(data->start_up_time, data->start_up_time + 100);
> 1060
> 1061 /* Bring chip out of reset if there is an assigned GPIO line */
> 1062 gpiod = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> 1063 /* Deassert the signal */
> 1064 if (!IS_ERR(gpiod)) {
> 1065 dev_info(dev, "release reset\n");
> 1066 gpiod_set_value(gpiod, 0);
> 1067 }
> 1068
> 1069 data->regmap = regmap;
> 1070 ret = regmap_read(regmap, BMP280_REG_ID, &chip_id);
> 1071 if (ret < 0)
> 1072 goto out_disable_regulators;
> 1073 if (chip_id != chip) {
> 1074 dev_err(dev, "bad chip id: expected %x got %x\n",
> 1075 chip, chip_id);
> 1076 ret = -EINVAL;
> 1077 goto out_disable_regulators;
> 1078 }
> 1079
> 1080 ret = data->chip_info->chip_config(data);
> 1081 if (ret < 0)
> 1082 goto out_disable_regulators;
> 1083
> 1084 dev_set_drvdata(dev, indio_dev);
> 1085
> 1086 /*
> 1087 * Some chips have calibration parameters "programmed into the devices'
> 1088 * non-volatile memory during production". Let's read them out at probe
> 1089 * time once. They will not change.
> 1090 */
> 1091 if (chip_id == BMP180_CHIP_ID) {
> 1092 ret = bmp180_read_calib(data, &data->calib.bmp180);
> 1093 if (ret < 0) {
> 1094 dev_err(data->dev,
> 1095 "failed to read calibration coefficients\n");
> 1096 goto out_disable_regulators;
> 1097 }
> 1098 } else if (chip_id == BMP280_CHIP_ID || chip_id == BME280_CHIP_ID) {
> 1099 ret = bmp280_read_calib(data, &data->calib.bmp280, chip_id);
> 1100 if (ret < 0) {
> 1101 dev_err(data->dev,
> 1102 "failed to read calibration coefficients\n");
> 1103 goto out_disable_regulators;
> 1104 }
> 1105 }
> 1106
> 1107 /*
> 1108 * Attempt to grab an optional EOC IRQ - only the BMP085 has this
> 1109 * however as it happens, the BMP085 shares the chip ID of BMP180
> 1110 * so we look for an IRQ if we have that.
> 1111 */
> 1112 if (irq > 0 || (chip_id == BMP180_CHIP_ID)) {
> 1113 ret = bmp085_fetch_eoc_irq(dev, name, irq, data);
> 1114 if (ret)
> 1115 goto out_disable_regulators;
> 1116 }
> 1117
> 1118 /* Enable runtime PM */
> 1119 pm_runtime_get_noresume(dev);
> 1120 pm_runtime_set_active(dev);
> 1121 pm_runtime_enable(dev);
> 1122 /*
> 1123 * Set autosuspend to two orders of magnitude larger than the
> 1124 * start-up time.
> 1125 */
> 1126 pm_runtime_set_autosuspend_delay(dev, data->start_up_time / 10);
> 1127 pm_runtime_use_autosuspend(dev);
> 1128 pm_runtime_put(dev);
> 1129
> 1130 ret = iio_device_register(indio_dev);
> 1131 if (ret)
> 1132 goto out_runtime_pm_disable;
> 1133
> 1134
> 1135 return 0;
> 1136
> 1137 out_runtime_pm_disable:
> 1138 pm_runtime_get_sync(data->dev);
> 1139 pm_runtime_put_noidle(data->dev);
> 1140 pm_runtime_disable(data->dev);
> 1141 out_disable_regulators:
> 1142 regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
> 1143 return ret;
> 1144 }
> 1145 EXPORT_SYMBOL(bmp280_common_probe);
> 1146
>
> ---
> 0-DAY kernel test infrastructure Open Source Technology Center
> https://lists.01.org/pipermail/kbuild-all Intel Corporation
Powered by blists - more mailing lists