| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20191003154602.721839595@linuxfoundation.org>
Date: Thu, 3 Oct 2019 17:54:38 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Tony Camuso <tcamuso@...hat.com>,
Corey Minyard <cminyard@...sta.com>
Subject: [PATCH 5.2 300/313] ipmi: move message error checking to avoid deadlock
From: Tony Camuso <tcamuso@...hat.com>
commit 383035211c79d4d98481a09ad429b31c7dbf22bd upstream.
V1->V2: in handle_one_rcv_msg, if data_size > 2, set requeue to zero and
goto out instead of calling ipmi_free_msg.
Kosuke Tatsukawa <tatsu@...jp.nec.com>
In the source stack trace below, function set_need_watch tries to
take out the same si_lock that was taken earlier by ipmi_thread.
ipmi_thread() [drivers/char/ipmi/ipmi_si_intf.c:995]
smi_event_handler() [drivers/char/ipmi/ipmi_si_intf.c:765]
handle_transaction_done() [drivers/char/ipmi/ipmi_si_intf.c:555]
deliver_recv_msg() [drivers/char/ipmi/ipmi_si_intf.c:283]
ipmi_smi_msg_received() [drivers/char/ipmi/ipmi_msghandler.c:4503]
intf_err_seq() [drivers/char/ipmi/ipmi_msghandler.c:1149]
smi_remove_watch() [drivers/char/ipmi/ipmi_msghandler.c:999]
set_need_watch() [drivers/char/ipmi/ipmi_si_intf.c:1066]
Upstream commit e1891cffd4c4896a899337a243273f0e23c028df adds code to
ipmi_smi_msg_received() to call smi_remove_watch() via intf_err_seq()
and this seems to be causing the deadlock.
commit e1891cffd4c4896a899337a243273f0e23c028df
Author: Corey Minyard <cminyard@...sta.com>
Date: Wed Oct 24 15:17:04 2018 -0500
ipmi: Make the smi watcher be disabled immediately when not needed
The fix is to put all messages in the queue and move the message
checking code out of ipmi_smi_msg_received and into handle_one_recv_msg,
which processes the message checking after ipmi_thread releases its
locks.
Additionally,Kosuke Tatsukawa <tatsu@...jp.nec.com> reported that
handle_new_recv_msgs calls ipmi_free_msg when handle_one_rcv_msg returns
zero, so that the call to ipmi_free_msg in handle_one_rcv_msg introduced
another panic when "ipmitool sensor list" was run in a loop. He
submitted this part of the patch.
+free_msg:
+ requeue = 0;
+ goto out;
Reported by: Osamu Samukawa <osa-samukawa@...jp.nec.com>
Characterized by: Kosuke Tatsukawa <tatsu@...jp.nec.com>
Signed-off-by: Tony Camuso <tcamuso@...hat.com>
Fixes: e1891cffd4c4 ("ipmi: Make the smi watcher be disabled immediately when not needed")
Cc: stable@...r.kernel.org # 5.1
Signed-off-by: Corey Minyard <cminyard@...sta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/char/ipmi/ipmi_msghandler.c | 114 ++++++++++++++++++------------------
1 file changed, 57 insertions(+), 57 deletions(-)
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -4215,7 +4215,53 @@ static int handle_one_recv_msg(struct ip
int chan;
ipmi_debug_msg("Recv:", msg->rsp, msg->rsp_size);
- if (msg->rsp_size < 2) {
+
+ if ((msg->data_size >= 2)
+ && (msg->data[0] == (IPMI_NETFN_APP_REQUEST << 2))
+ && (msg->data[1] == IPMI_SEND_MSG_CMD)
+ && (msg->user_data == NULL)) {
+
+ if (intf->in_shutdown)
+ goto free_msg;
+
+ /*
+ * This is the local response to a command send, start
+ * the timer for these. The user_data will not be
+ * NULL if this is a response send, and we will let
+ * response sends just go through.
+ */
+
+ /*
+ * Check for errors, if we get certain errors (ones
+ * that mean basically we can try again later), we
+ * ignore them and start the timer. Otherwise we
+ * report the error immediately.
+ */
+ if ((msg->rsp_size >= 3) && (msg->rsp[2] != 0)
+ && (msg->rsp[2] != IPMI_NODE_BUSY_ERR)
+ && (msg->rsp[2] != IPMI_LOST_ARBITRATION_ERR)
+ && (msg->rsp[2] != IPMI_BUS_ERR)
+ && (msg->rsp[2] != IPMI_NAK_ON_WRITE_ERR)) {
+ int ch = msg->rsp[3] & 0xf;
+ struct ipmi_channel *chans;
+
+ /* Got an error sending the message, handle it. */
+
+ chans = READ_ONCE(intf->channel_list)->c;
+ if ((chans[ch].medium == IPMI_CHANNEL_MEDIUM_8023LAN)
+ || (chans[ch].medium == IPMI_CHANNEL_MEDIUM_ASYNC))
+ ipmi_inc_stat(intf, sent_lan_command_errs);
+ else
+ ipmi_inc_stat(intf, sent_ipmb_command_errs);
+ intf_err_seq(intf, msg->msgid, msg->rsp[2]);
+ } else
+ /* The message was sent, start the timer. */
+ intf_start_seq_timer(intf, msg->msgid);
+free_msg:
+ requeue = 0;
+ goto out;
+
+ } else if (msg->rsp_size < 2) {
/* Message is too small to be correct. */
dev_warn(intf->si_dev,
"BMC returned too small a message for netfn %x cmd %x, got %d bytes\n",
@@ -4472,62 +4518,16 @@ void ipmi_smi_msg_received(struct ipmi_s
unsigned long flags = 0; /* keep us warning-free. */
int run_to_completion = intf->run_to_completion;
- if ((msg->data_size >= 2)
- && (msg->data[0] == (IPMI_NETFN_APP_REQUEST << 2))
- && (msg->data[1] == IPMI_SEND_MSG_CMD)
- && (msg->user_data == NULL)) {
-
- if (intf->in_shutdown)
- goto free_msg;
-
- /*
- * This is the local response to a command send, start
- * the timer for these. The user_data will not be
- * NULL if this is a response send, and we will let
- * response sends just go through.
- */
-
- /*
- * Check for errors, if we get certain errors (ones
- * that mean basically we can try again later), we
- * ignore them and start the timer. Otherwise we
- * report the error immediately.
- */
- if ((msg->rsp_size >= 3) && (msg->rsp[2] != 0)
- && (msg->rsp[2] != IPMI_NODE_BUSY_ERR)
- && (msg->rsp[2] != IPMI_LOST_ARBITRATION_ERR)
- && (msg->rsp[2] != IPMI_BUS_ERR)
- && (msg->rsp[2] != IPMI_NAK_ON_WRITE_ERR)) {
- int ch = msg->rsp[3] & 0xf;
- struct ipmi_channel *chans;
-
- /* Got an error sending the message, handle it. */
-
- chans = READ_ONCE(intf->channel_list)->c;
- if ((chans[ch].medium == IPMI_CHANNEL_MEDIUM_8023LAN)
- || (chans[ch].medium == IPMI_CHANNEL_MEDIUM_ASYNC))
- ipmi_inc_stat(intf, sent_lan_command_errs);
- else
- ipmi_inc_stat(intf, sent_ipmb_command_errs);
- intf_err_seq(intf, msg->msgid, msg->rsp[2]);
- } else
- /* The message was sent, start the timer. */
- intf_start_seq_timer(intf, msg->msgid);
-
-free_msg:
- ipmi_free_smi_msg(msg);
- } else {
- /*
- * To preserve message order, we keep a queue and deliver from
- * a tasklet.
- */
- if (!run_to_completion)
- spin_lock_irqsave(&intf->waiting_rcv_msgs_lock, flags);
- list_add_tail(&msg->link, &intf->waiting_rcv_msgs);
- if (!run_to_completion)
- spin_unlock_irqrestore(&intf->waiting_rcv_msgs_lock,
- flags);
- }
+ /*
+ * To preserve message order, we keep a queue and deliver from
+ * a tasklet.
+ */
+ if (!run_to_completion)
+ spin_lock_irqsave(&intf->waiting_rcv_msgs_lock, flags);
+ list_add_tail(&msg->link, &intf->waiting_rcv_msgs);
+ if (!run_to_completion)
+ spin_unlock_irqrestore(&intf->waiting_rcv_msgs_lock,
+ flags);
if (!run_to_completion)
spin_lock_irqsave(&intf->xmit_msgs_lock, flags);
Powered by blists - more mailing lists