linux-kernel - [PATCH v2 6/7] dt-bindings: iio: adc: max1027: Mark interrupts as optional

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20191003173401.16343-7-miquel.raynal@bootlin.com>
Date:   Thu,  3 Oct 2019 19:34:00 +0200
From:   Miquel Raynal <miquel.raynal@...tlin.com>
To:     Jonathan Cameron <jic23@...nel.org>,
        Hartmut Knaack <knaack.h@....de>,
        Lars-Peter Clausen <lars@...afoo.de>,
        Peter Meerwald-Stadler <pmeerw@...erw.net>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>
Cc:     <devicetree@...r.kernel.org>, linux-iio@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
        Miquel Raynal <miquel.raynal@...tlin.com>
Subject: [PATCH v2 6/7] dt-bindings: iio: adc: max1027: Mark interrupts as optional

The chips have a 'start conversion' and a 'end of conversion' pair of
pins. They can be used but this is absolutely not mandatory as regular
polling is supported by the chip depending on its internal clocking
setup.

There is no physical reason to force the use of interrupts so turn
them optional.

Signed-off-by: Miquel Raynal <miquel.raynal@...tlin.com>
---
 Documentation/devicetree/bindings/iio/adc/max1027-adc.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt b/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt
index e680c61dfb84..7b23d68f655c 100644
--- a/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt
@@ -3,6 +3,8 @@
 Required properties:
   - compatible: Should be "maxim,max1027" or "maxim,max1029" or "maxim,max1031"
   - reg: SPI chip select number for the device
+
+Optional properties:
   - interrupts: IRQ line for the ADC
   see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
 
-- 
2.20.1