linux-kernel - Re: [PATCH v3 5/5] gpio: syscon: Add support for the Xylon LogiCVC GPIOs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAMpxmJWQ9iuNj8Nfhf0hVzP6piNPrb8_e7ucth0rmg8KwT4HdA@mail.gmail.com>
Date:   Thu, 3 Oct 2019 10:26:17 +0200
From:   Bartosz Golaszewski <bgolaszewski@...libre.com>
To:     Paul Kocialkowski <paul.kocialkowski@...tlin.com>
Cc:     linux-gpio <linux-gpio@...r.kernel.org>,
        linux-devicetree <devicetree@...r.kernel.org>,
        LKML <linux-kernel@...r.kernel.org>,
        Linus Walleij <linus.walleij@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Lee Jones <lee.jones@...aro.org>,
        Thomas Petazzoni <thomas.petazzoni@...tlin.com>
Subject: Re: [PATCH v3 5/5] gpio: syscon: Add support for the Xylon LogiCVC GPIOs

Hi Paul,

just two nits:

pt., 27 wrz 2019 o 12:04 Paul Kocialkowski
<paul.kocialkowski@...tlin.com> napisał(a):
>
> The LogiCVC display hardware block comes with GPIO capabilities
> that must be exposed separately from the main driver (as GPIOs) for
> use with regulators and panels. A syscon is used to share the same
> regmap across the two drivers.
>
> Since the GPIO capabilities are pretty simple, add them to the syscon
> GPIO driver.
>
> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@...tlin.com>
> ---
>  drivers/gpio/gpio-syscon.c | 68 ++++++++++++++++++++++++++++++++++++++
>  1 file changed, 68 insertions(+)
>
> diff --git a/drivers/gpio/gpio-syscon.c b/drivers/gpio/gpio-syscon.c
> index 05c537ed73f1..cdcb913b8f0c 100644
> --- a/drivers/gpio/gpio-syscon.c
> +++ b/drivers/gpio/gpio-syscon.c
> @@ -190,6 +190,70 @@ static const struct syscon_gpio_data keystone_dsp_gpio = {
>         .set            = keystone_gpio_set,
>  };
>
> +#define LOGICVC_CTRL_REG               0x40
> +#define LOGICVC_CTRL_GPIO_SHIFT                11
> +#define LOGICVC_CTRL_GPIO_BITS         5
> +
> +#define LOGICVC_POWER_CTRL_REG         0x78
> +#define LOGICVC_POWER_CTRL_GPIO_SHIFT  0
> +#define LOGICVC_POWER_CTRL_GPIO_BITS   4
> +
> +static void logicvc_gpio_offset(struct syscon_gpio_priv *priv,
> +                               unsigned offset, unsigned int *reg,
> +                               unsigned int *bit)
> +{
> +       if (offset >= LOGICVC_CTRL_GPIO_BITS) {
> +               *reg = LOGICVC_POWER_CTRL_REG;
> +
> +               /* To the (virtual) power ctrl offset. */
> +               offset -= LOGICVC_CTRL_GPIO_BITS;
> +               /* To the actual bit offset in reg. */
> +               offset += LOGICVC_POWER_CTRL_GPIO_SHIFT;
> +       } else {
> +               *reg = LOGICVC_CTRL_REG;
> +
> +               /* To the actual bit offset in reg. */
> +               offset += LOGICVC_CTRL_GPIO_SHIFT;
> +       }
> +
> +       *bit = BIT(offset);
> +}
> +
> +static int logicvc_gpio_get(struct gpio_chip *chip, unsigned offset)
> +{
> +       struct syscon_gpio_priv *priv = gpiochip_get_data(chip);
> +       unsigned int reg;
> +       unsigned int bit;
> +       unsigned int value;

Can you put these on a single line?

> +       int ret;
> +
> +       logicvc_gpio_offset(priv, offset, &reg, &bit);
> +
> +       ret = regmap_read(priv->syscon, reg, &value);
> +       if (ret)
> +               return ret;
> +
> +       return !!(value & bit);
> +}
> +
> +static void logicvc_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
> +{
> +       struct syscon_gpio_priv *priv = gpiochip_get_data(chip);
> +       unsigned int reg;
> +       unsigned int bit;

Same here.

Bart

> +
> +       logicvc_gpio_offset(priv, offset, &reg, &bit);
> +
> +       regmap_update_bits(priv->syscon, reg, bit, val ? bit : 0);
> +}
> +
> +static const struct syscon_gpio_data logicvc_gpio = {
> +       .flags          = GPIO_SYSCON_FEAT_OUT,
> +       .bit_count      = LOGICVC_CTRL_GPIO_BITS + LOGICVC_POWER_CTRL_GPIO_BITS,
> +       .get            = logicvc_gpio_get,
> +       .set            = logicvc_gpio_set,
> +};
> +
>  static const struct of_device_id syscon_gpio_ids[] = {
>         {
>                 .compatible     = "cirrus,ep7209-mctrl-gpio",
> @@ -203,6 +267,10 @@ static const struct of_device_id syscon_gpio_ids[] = {
>                 .compatible     = "rockchip,rk3328-grf-gpio",
>                 .data           = &rockchip_rk3328_gpio_mute,
>         },
> +       {
> +               .compatible     = "xylon,logicvc-3.02.a-gpio",
> +               .data           = &logicvc_gpio,
> +       },
>         { }
>  };
>  MODULE_DEVICE_TABLE(of, syscon_gpio_ids);
> --
> 2.23.0
>