[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1570102361-11696-3-git-send-email-talel@amazon.com>
Date: Thu, 3 Oct 2019 14:32:41 +0300
From: Talel Shenhar <talel@...zon.com>
To: <robh+dt@...nel.org>, <maz@...nel.org>, <mark.rutland@....com>,
<arnd@...db.de>, <bp@...en8.de>, <mchehab@...nel.org>,
<james.morse@....com>, <davem@...emloft.net>,
<gregkh@...uxfoundation.org>, <paulmck@...ux.ibm.com>,
<talel@...zon.com>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-edac@...r.kernel.org>
CC: <dwmw@...zon.co.uk>, <benh@...nel.crashing.org>,
<hhhawa@...zon.com>, <ronenk@...zon.com>, <jonnyc@...zon.com>,
<hanochu@...zon.com>, <amirkl@...zon.com>, <barakw@...zon.com>
Subject: [PATCH v4 2/2] soc: amazon: al-pos-edac: Introduce Amazon's Annapurna Labs POS EDAC driver
The Amazon's Annapurna Labs SoCs includes Point Of Serialization error
logging unit that reports an error in case write error (e.g . Attempt to
write to a read only register).
This error shall be reported to EDAC subsystem as uncorrectable-error.
Signed-off-by: Talel Shenhar <talel@...zon.com>
---
MAINTAINERS | 7 ++
drivers/edac/Kconfig | 6 ++
drivers/edac/Makefile | 1 +
drivers/edac/al_pos_edac.c | 173 +++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 187 insertions(+)
create mode 100644 drivers/edac/al_pos_edac.c
diff --git a/MAINTAINERS b/MAINTAINERS
index e7a47b5..f5ce446 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -751,6 +751,13 @@ F: drivers/tty/serial/altera_jtaguart.c
F: include/linux/altera_uart.h
F: include/linux/altera_jtaguart.h
+AMAZON ANNAPURNA LABS POS EDAC DRIVER
+M: Talel Shenhar <talel@...zon.com>
+M: Talel Shenhar <talelshenhar@...il.com>
+S: Maintained
+F: Documentation/devicetree/bindings/edac/amazon,al-pos-edac.yaml
+F: drivers/edac/al-pos-edac.c
+
AMAZON ANNAPURNA LABS THERMAL MMIO DRIVER
M: Talel Shenhar <talel@...zon.com>
S: Maintained
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 200c04c..bb5805f 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -100,6 +100,12 @@ config EDAC_AMD64_ERROR_INJECTION
In addition, there are two control files, inject_read and inject_write,
which trigger the DRAM ECC Read and Write respectively.
+config EDAC_AL_POS
+ tristate "Amazon's Annapurna Labs POS EDAC driver"
+ depends on (ARCH_ALPINE || COMPILE_TEST)
+ help
+ Include support for the SoC POS EDAC error capability.
+
config EDAC_AMD76X
tristate "AMD 76x (760, 762, 768)"
depends on PCI && X86_32
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 165ca65e..3571936 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_EDAC_GHES) += ghes_edac.o
edac_mce_amd-y := mce_amd.o
obj-$(CONFIG_EDAC_DECODE_MCE) += edac_mce_amd.o
+obj-$(CONFIG_EDAC_AL_POS) += al_pos_edac.o
obj-$(CONFIG_EDAC_AMD76X) += amd76x_edac.o
obj-$(CONFIG_EDAC_CPC925) += cpc925_edac.o
obj-$(CONFIG_EDAC_I5000) += i5000_edac.o
diff --git a/drivers/edac/al_pos_edac.c b/drivers/edac/al_pos_edac.c
new file mode 100644
index 00000000..bd6cd87
--- /dev/null
+++ b/drivers/edac/al_pos_edac.c
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ */
+#include <linux/bitfield.h>
+#include <linux/edac.h>
+#include <linux/of_irq.h>
+#include "edac_module.h"
+
+#define DRV_NAME "al_pos_edac"
+#define AL_POS_EDAC_MSG_MAX 256
+
+/* Registers Offset */
+#define AL_POS_ERROR_LOG_1 0x0
+#define AL_POS_ERROR_LOG_0 0x4
+
+/* Registers Fields */
+#define AL_POS_ERROR_LOG_1_VALID BIT(31)
+#define AL_POS_ERROR_LOG_1_BRESP GENMASK(18, 17)
+#define AL_POS_ERROR_LOG_1_REQUEST_ID GENMASK(16, 8)
+#define AL_POS_ERROR_LOG_1_ADDR_HIGH GENMASK(7, 0)
+
+#define AL_POS_ERROR_LOG_0_ADDR_LOW GENMASK(31, 0)
+
+struct al_pos_edac {
+ struct edac_device_ctl_info *edac_dev;
+ void __iomem *mmio_base;
+ int irq;
+};
+
+static int al_pos_handle(struct al_pos_edac *al_pos)
+{
+ u32 log0, log1;
+ u64 addr;
+ u16 request_id;
+ u8 bresp;
+ char msg[AL_POS_EDAC_MSG_MAX];
+
+ log1 = readl(al_pos->mmio_base + AL_POS_ERROR_LOG_1);
+ if (!FIELD_GET(AL_POS_ERROR_LOG_1_VALID, log1))
+ return 0;
+
+ log0 = readl(al_pos->mmio_base + AL_POS_ERROR_LOG_0);
+ writel(0, al_pos->mmio_base + AL_POS_ERROR_LOG_1);
+
+ addr = FIELD_GET(AL_POS_ERROR_LOG_0_ADDR_LOW, log0);
+ addr |= (((u64)FIELD_GET(AL_POS_ERROR_LOG_1_ADDR_HIGH, log1)) << 32);
+ request_id = FIELD_GET(AL_POS_ERROR_LOG_1_REQUEST_ID, log1);
+ bresp = FIELD_GET(AL_POS_ERROR_LOG_1_BRESP, log1);
+
+ snprintf(msg, sizeof(msg),
+ "addr=0x%llx request_id=0x%x bresp=0x%x\n",
+ addr, request_id, bresp);
+
+ edac_device_handle_ue(al_pos->edac_dev, 0, 0, msg);
+
+ return 1;
+}
+
+static void al_pos_edac_check(struct edac_device_ctl_info *edac_dev)
+{
+ struct al_pos_edac *al_pos = edac_dev->pvt_info;
+
+ al_pos_handle(al_pos);
+}
+
+static irqreturn_t al_pos_irq_handler(int irq, void *info)
+{
+ struct platform_device *pdev = info;
+ struct al_pos_edac *al_pos = platform_get_drvdata(pdev);
+
+ if (al_pos_handle(al_pos))
+ return IRQ_HANDLED;
+ return IRQ_NONE;
+}
+
+static int al_pos_probe(struct platform_device *pdev)
+{
+ struct edac_device_ctl_info *edac_dev;
+ struct al_pos_edac *al_pos;
+ int ret;
+
+ edac_dev = edac_device_alloc_ctl_info(sizeof(*al_pos), DRV_NAME, 1,
+ DRV_NAME, 1, 0, NULL, 0,
+ edac_device_alloc_index());
+ if (!edac_dev)
+ return -ENOMEM;
+
+ al_pos = edac_dev->pvt_info;
+ al_pos->edac_dev = edac_dev;
+ platform_set_drvdata(pdev, al_pos);
+
+ al_pos->mmio_base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(al_pos->mmio_base)) {
+ dev_err(&pdev->dev, "failed to ioremap memory (%ld)\n",
+ PTR_ERR(al_pos->mmio_base));
+ return PTR_ERR(al_pos->mmio_base);
+ }
+
+ al_pos->irq = platform_get_irq(pdev, 0);
+ if (al_pos->irq <= 0)
+ edac_dev->edac_check = al_pos_edac_check;
+
+ edac_dev->dev = &pdev->dev;
+ edac_dev->mod_name = DRV_NAME;
+ edac_dev->dev_name = dev_name(&pdev->dev);
+ edac_dev->ctl_name = "POS";
+
+ ret = edac_device_add_device(edac_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to add edac device\n");
+ goto err_free_edac;
+ }
+
+ if (al_pos->irq > 0) {
+ ret = devm_request_irq(&pdev->dev,
+ al_pos->irq,
+ al_pos_irq_handler,
+ 0,
+ pdev->name,
+ pdev);
+ if (ret != 0) {
+ dev_err(&pdev->dev,
+ "failed to register to irq %d (%d)\n",
+ al_pos->irq, ret);
+ goto err_remove_edac;
+ }
+ }
+
+ return 0;
+
+err_remove_edac:
+ edac_device_del_device(edac_dev->dev);
+err_free_edac:
+ edac_device_free_ctl_info(edac_dev);
+
+ return ret;
+}
+
+static int al_pos_remove(struct platform_device *pdev)
+{
+ struct al_pos_edac *al_pos = platform_get_drvdata(pdev);
+
+ if (al_pos->irq > 0)
+ devm_free_irq(&pdev->dev, al_pos->irq, pdev);
+
+ edac_device_del_device(al_pos->edac_dev->dev);
+ edac_device_free_ctl_info(al_pos->edac_dev);
+
+ return 0;
+}
+
+static const struct of_device_id al_pos_of_match[] = {
+ { .compatible = "amazon,al-pos-edac", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, al_pos_of_match);
+
+static struct platform_driver al_pos_driver = {
+ .probe = al_pos_probe,
+ .remove = al_pos_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = al_pos_of_match,
+ },
+};
+
+module_platform_driver(al_pos_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Talel Shenhar");
+MODULE_DESCRIPTION("Amazon's Annapurna Labs POS driver");
--
2.7.4
Powered by blists - more mailing lists