[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191003134147.9458-3-sre@kernel.org>
Date: Thu, 3 Oct 2019 15:41:45 +0200
From: Sebastian Reichel <sre@...nel.org>
To: Sebastian Reichel <sre@...nel.org>,
Marcel Holtmann <marcel@...tmann.org>,
Tony Lindgren <tony@...mide.com>
Cc: Adam Ford <aford173@...il.com>,
Enric Balletbo i Serra <enric.balletbo@...labora.com>,
linux-bluetooth@...r.kernel.org, linux-omap@...r.kernel.org,
linux-kernel@...r.kernel.org, kernel@...labora.com,
Sebastian Reichel <sebastian.reichel@...labora.com>
Subject: [PATCHv2 2/4] ARM: dts: IGEP: Add WiLink UART node
From: Sebastian Reichel <sebastian.reichel@...labora.com>
Add a node for the UART part of WiLink chip.
Tested-by: Enric Balletbo i Serra <enric.balletbo@...labora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@...labora.com>
---
arch/arm/boot/dts/omap3-igep0020-rev-f.dts | 8 ++++++++
arch/arm/boot/dts/omap3-igep0030-rev-g.dts | 8 ++++++++
2 files changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
index 03dcd05fb8a0..001decc20b3d 100644
--- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
+++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
@@ -49,3 +49,11 @@
interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* gpio 177 */
};
};
+
+&uart2 {
+ bluetooth {
+ compatible = "ti,wl1835-st";
+ enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* gpio 137 */
+ max-speed = <300000>;
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
index 060acd1e803a..9a8975799e16 100644
--- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
+++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
@@ -71,3 +71,11 @@
interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */
};
};
+
+&uart2 {
+ bluetooth {
+ compatible = "ti,wl1835-st";
+ enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* gpio 137 */
+ max-speed = <300000>;
+ };
+};
--
2.23.0
Powered by blists - more mailing lists