Message-ID: <20191004153750.GB823823@kroah.com>
Date:   Fri, 4 Oct 2019 17:37:50 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     Stephen Boyd <sboyd@...nel.org>
Cc:     "Rafael J. Wysocki" <rafael@...nel.org>,
        Frank Rowand <frowand.list@...il.com>,
        Jonathan Corbet <corbet@....net>, Len Brown <lenb@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Rob Herring <robh+dt@...nel.org>,
        Saravana Kannan <saravanak@...gle.com>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-doc@...r.kernel.org, linux-acpi@...r.kernel.org,
        clang-built-linux@...glegroups.com,
        David Collins <collinsd@...eaurora.org>,
        kernel-team@...roid.com, kbuild test robot <lkp@...el.com>
Subject: Re: [PATCH v11 3/6] of: property: Add functional dependency link
 from DT bindings

On Wed, Sep 11, 2019 at 03:29:25AM -0700, Stephen Boyd wrote:
> Quoting Saravana Kannan (2019-09-04 14:11:22)
> > Add device links after the devices are created (but before they are
> > probed) by looking at common DT bindings like clocks and
> > interconnects.
> > 
> > Automatically adding device links for functional dependencies at the
> > framework level provides the following benefits:
> > 
> > - Optimizes device probe order and avoids the useless work of
> >   attempting probes of devices that will not probe successfully
> >   (because their suppliers aren't present or haven't probed yet).
> > 
> >   For example, in a commonly available mobile SoC, registering just
> >   one consumer device's driver at an initcall level earlier than the
> >   supplier device's driver causes 11 failed probe attempts before the
> >   consumer device probes successfully. This was with a kernel with all
> >   the drivers statically compiled in. This problem gets a lot worse if
> >   all the drivers are loaded as modules without direct symbol
> >   dependencies.
> > 
> > - Supplier devices like clock providers, interconnect providers, etc
> >   need to keep the resources they provide active and at a particular
> >   state(s) during boot up even if their current set of consumers don't
> >   request the resource to be active. This is because the rest of the
> >   consumers might not have probed yet and turning off the resource
> >   before all the consumers have probed could lead to a hang or
> >   undesired user experience.
> > 
> >   Some frameworks (Eg: regulator) handle this today by turning off
> >   "unused" resources at late_initcall_sync and hoping all the devices
> >   have probed by then. This is not a valid assumption for systems with
> >   loadable modules. Other frameworks (Eg: clock) just don't handle
> >   this due to the lack of a clear signal for when they can turn off
> >   resources.
> 
> The clk framework disables unused clks at late_initcall_sync. What do
> you mean clk framework doesn't turn them off because of a clear signal?

There's a number of minor things you pointed out in this review.

Saravana, can you send a follow-on patch for the minor code cleanups
like formatting and the like that was found here?

> > +static int of_link_to_phandle(struct device *dev, struct device_node *sup_np)
> > +{
> > +       struct device *sup_dev;
> > +       u32 dl_flags = DL_FLAG_AUTOPROBE_CONSUMER;
> 
> Is it really a u32 instead of an unsigned int or unsigned long?
> 
> > +       int ret = 0;
> > +       struct device_node *tmp_np = sup_np;
> > +
> > +       of_node_get(sup_np);
> > +       /*
> > +        * Find the device node that contains the supplier phandle.  It may be
> > +        * @sup_np or it may be an ancestor of @sup_np.
> > +        */
> > +       while (sup_np && !of_find_property(sup_np, "compatible", NULL))
> > +               sup_np = of_get_next_parent(sup_np);
> 
> I don't get this. This is assuming that drivers are only probed for
> device nodes that have a compatible string? What about drivers that make
> sub-devices for clk support that have drivers in drivers/clk/ that then
> attach at runtime later? This happens sometimes for MFDs that want to
> split the functionality across the driver tree to the respective
> subsystems.

For that, the link would not be there, correct?

> > +static int of_link_property(struct device *dev, struct device_node *con_np,
> > +                            const char *prop_name)
> > +{
> > +       struct device_node *phandle;
> > +       const struct supplier_bindings *s = bindings;
> > +       unsigned int i = 0;
> > +       bool matched = false;
> > +       int ret = 0;
> > +
> > +       /* Do not stop at first failed link, link all available suppliers. */
> > +       while (!matched && s->parse_prop) {
> > +               while ((phandle = s->parse_prop(con_np, prop_name, i))) {
> > +                       matched = true;
> > +                       i++;
> > +                       if (of_link_to_phandle(dev, phandle) == -EAGAIN)
> > +                               ret = -EAGAIN;
> 
> And don't break?

There was comments before about how this is not needed.  Frank asked
that the comment be removed.  And now you point it out again :)

Look at the comment a few lines up, we have to go through all of the
suppliers.

> > +static int __of_link_to_suppliers(struct device *dev,
> 
> Why the double underscore?
> 
> > +                                 struct device_node *con_np)
> > +{
> > +       struct device_node *child;
> > +       struct property *p;
> > +       int ret = 0;
> > +
> > +       for_each_property_of_node(con_np, p)
> > +               if (of_link_property(dev, con_np, p->name))
> > +                       ret = -EAGAIN;
> 
> Same comment.

Same response as above :)

thanks,

greg k-h

Powered by blists - more mailing lists