linux-kernel - [PATCH RFC v2 3/5] ARM: dts: qcom: pm8941: add 5vs2 regulator node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sun,  6 Oct 2019 21:45:07 -0400
From:   Brian Masney <masneyb@...tation.org>
To:     robdclark@...il.com, sean@...rly.run
Cc:     bjorn.andersson@...aro.org, a.hajda@...sung.com,
        Laurent.pinchart@...asonboard.com, airlied@...ux.ie,
        daniel@...ll.ch, dri-devel@...ts.freedesktop.org,
        linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        freedreno@...ts.freedesktop.org, jonathan@...ek.ca,
        Linus Walleij <linus.walleij@...aro.org>
Subject: [PATCH RFC v2 3/5] ARM: dts: qcom: pm8941: add 5vs2 regulator node

pm8941 is missing the 5vs2 regulator node so let's add it since its
needed to get the external display working. This regulator was already
configured in the interrupts property on the parent node.

Note that this regulator is referred to as mvs2 in the downstream MSM
kernel sources.

Signed-off-by: Brian Masney <masneyb@...tation.org>
Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
---
Changes since v1:
- None

 arch/arm/boot/dts/qcom-pm8941.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index f198480c8ef4..c1f2012d1c8b 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -178,6 +178,16 @@
 				qcom,vs-soft-start-strength = <0>;
 				regulator-initial-mode = <1>;
 			};
+
+			pm8941_5vs2: 5vs2 {
+				regulator-enable-ramp-delay = <1000>;
+				regulator-pull-down;
+				regulator-over-current-protection;
+				qcom,ocp-max-retries = <10>;
+				qcom,ocp-retry-delay = <30>;
+				qcom,vs-soft-start-strength = <0>;
+				regulator-initial-mode = <1>;
+			};
 		};
 	};
 };
-- 
2.21.0