[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <fc2b8ebb-f7f8-555e-ec36-bad2e531d194@ti.com>
Date: Mon, 7 Oct 2019 15:20:25 +0300
From: Roger Quadros <rogerq@...com>
To: Pawel Laszczak <pawell@...ence.com>, <felipe.balbi@...ux.intel.com>
CC: <gregkh@...uxfoundation.org>, <linux-usb@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <jbergsagel@...com>,
<nsekhar@...com>, <nm@...com>, <sureshp@...ence.com>,
<peter.chen@....com>, <kurahul@...ence.com>
Subject: Re: [PATCH] usb: cdns3: Fix for incorrect DMA mask.
On 07/10/2019 15:03, Pawel Laszczak wrote:
> This patch restores the correct DMA mask after switching back to device
> mode.
> The issue occurred because Device part of controller use 32 bits DMA and
> Host side use 64 bits DMA. During loading XHCI driver the DMA mask
> used by driver is overwritten by XHCI driver so it must be restored
> to 32 bits.
>
> Reported-by: Pawel Laszczak <pawell@...ence.com>
> Signed-off-by: Roger Quadros <rogerq@...com>
> Signed-off-by: Pawel Laszczak <pawell@...ence.com>
> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Tested-by: Roger Quadros <rogerq@...com>
> ---
> drivers/usb/cdns3/gadget.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c
> index 157536753b8c..2ca280f4c054 100644
> --- a/drivers/usb/cdns3/gadget.c
> +++ b/drivers/usb/cdns3/gadget.c
> @@ -2663,6 +2663,13 @@ static int __cdns3_gadget_init(struct cdns3 *cdns)
> {
> int ret = 0;
>
> + /* Ensure 32-bit DMA Mask in case we switched back from Host mode */
> + ret = dma_set_mask_and_coherent(cdns->dev, DMA_BIT_MASK(32));
> + if (ret) {
> + dev_err(cdns->dev, "Failed to set dma mask: %d\n", ret);
> + return ret;
> + }
> +
> cdns3_drd_switch_gadget(cdns, 1);
> pm_runtime_get_sync(cdns->dev);
>
>
--
cheers,
-roger
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Powered by blists - more mailing lists