linux-kernel - [PATCH v8 2/6] media: ad5820: DT new optional field enable-gpios

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon,  7 Oct 2019 15:28:52 +0200
From:   Ricardo Ribalda Delgado <ribalda@...nel.org>
To:     Pavel Machek <pavel@....cz>, Sakari Ailus <sakari.ailus@....fi>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        linux-media@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     Ricardo Ribalda Delgado <ribalda@...nel.org>,
        devicetree@...r.kernel.org,
        Laurent Pinchart <laurent.pinchart@...asonboard.com>,
        Rob Herring <robh@...nel.org>
Subject: [PATCH v8 2/6] media: ad5820: DT new optional field enable-gpios

Document new enable-gpio field. It can be used to disable the part
without turning down its regulator.

Cc: devicetree@...r.kernel.org
Signed-off-by: Ricardo Ribalda Delgado <ribalda@...nel.org>
Acked-by: Pavel Machek <pavel@....cz>
Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Reviewed-by: Rob Herring <robh@...nel.org>
---
 Documentation/devicetree/bindings/media/i2c/ad5820.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/i2c/ad5820.txt b/Documentation/devicetree/bindings/media/i2c/ad5820.txt
index 5940ca11c021..db596e8eb0ba 100644
--- a/Documentation/devicetree/bindings/media/i2c/ad5820.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ad5820.txt
@@ -8,6 +8,11 @@ Required Properties:
 
   - VANA-supply: supply of voltage for VANA pin
 
+Optional properties:
+
+   - enable-gpios : GPIO spec for the XSHUTDOWN pin. The XSHUTDOWN signal is
+active low, a high level on the pin enables the device.
+
 Example:
 
        ad5820: coil@c {
@@ -15,5 +20,6 @@ Example:
                reg = <0x0c>;
 
                VANA-supply = <&vaux4>;
+               enable-gpios = <&msmgpio 26 GPIO_ACTIVE_HIGH>;
        };
 
-- 
2.23.0