linux-kernel - Re: [PATCH] usb:cdns3: Fix for CV CH9 running with g

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <0b3cd2c4-c9dc-f88a-965d-357b9f34cec3@ti.com>
Date:   Tue, 8 Oct 2019 12:43:18 +0300
From:   Roger Quadros <rogerq@...com>
To:     Peter Chen <peter.chen@....com>,
        Pawel Laszczak <pawell@...ence.com>
CC:     "felipe.balbi@...ux.intel.com" <felipe.balbi@...ux.intel.com>,
        "gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
        "linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "jbergsagel@...com" <jbergsagel@...com>,
        "nsekhar@...com" <nsekhar@...com>, "nm@...com" <nm@...com>,
        Suresh Punnoose <sureshp@...ence.com>,
        Rahul Kumar <kurahul@...ence.com>
Subject: Re: [PATCH] usb:cdns3: Fix for CV CH9 running with g_zero driver.

Peter,

On 08/10/2019 11:44, Peter Chen wrote:
>   
>>>> Endpoint can defer transition to Halted state if endpoint has pending
>>>> requests.
>>>
>>> The implementation of halt handling is a little complicated, you may
>>> consider return -EAGAIN for functional stall through usb_ep_set_halt
>> >from function driver if the requests are pending, it doesn't need to
>>> defer such kinds of functional stall.
>>
>> Yes, I remember your suggestion regarding using EAGAIN, but f_mass_storage
>> Driver simple check the status and try to stall endpoint again after 100 ms.
>>
>> What if Command Verifier ask for endpoint status before this time, or if the transfer
>> will not be finished on time ? Then the CV test may fail.
>>
>> So solution from this patch should be more certain.
>>
> 
> Your description is reasonable, since I have not met this issue, I would like
> to know more about it:
> It occurs at CV9 or MSC test? For CV9 test, it may not try to stall non-ep0.
> Which test case was failed?

Since g_zero was used it would be CV9.

cheers,
-roger

> 
> Peter
> 
>>>
>>> Peter
>>>> Patch add additional condition that allows to return correct endpoint
>>>> status during Get Endpoint Status request even if the halting
>>>> endpoint is in progress.
>>>>
>>>> Reported-by: Rahul Kumar <kurahul@...ence.com>
>>>> Signed-off-by: Rahul Kumar <kurahul@...ence.com>
>>>> Signed-off-by: Pawel Laszczak <pawell@...ence.com>
>>>> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
>>>> ---
>>>>   drivers/usb/cdns3/ep0.c | 10 ++++++++--
>>>>   1 file changed, 8 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/usb/cdns3/ep0.c b/drivers/usb/cdns3/ep0.c index
>>>> 44f652e8b5a2..10ae03430f34 100644
>>>> --- a/drivers/usb/cdns3/ep0.c
>>>> +++ b/drivers/usb/cdns3/ep0.c
>>>> @@ -234,9 +234,11 @@ static int cdns3_req_ep0_set_address(struct
>>>> cdns3_device *priv_dev,  static int cdns3_req_ep0_get_status(struct
>> cdns3_device *priv_dev,
>>>>   				    struct usb_ctrlrequest *ctrl)  {
>>>> +	struct cdns3_endpoint *priv_ep;
>>>>   	__le16 *response_pkt;
>>>>   	u16 usb_status = 0;
>>>>   	u32 recip;
>>>> +	u8 index;
>>>>
>>>>   	recip = ctrl->bRequestType & USB_RECIP_MASK;
>>>>
>>>> @@ -262,9 +264,13 @@ static int cdns3_req_ep0_get_status(struct
>> cdns3_device *priv_dev,
>>>>   	case USB_RECIP_INTERFACE:
>>>>   		return cdns3_ep0_delegate_req(priv_dev, ctrl);
>>>>   	case USB_RECIP_ENDPOINT:
>>>> -		/* check if endpoint is stalled */
>>>> +		index = cdns3_ep_addr_to_index(ctrl->wIndex);
>>>> +		priv_ep = priv_dev->eps[index];
>>>> +
>>>> +		/* check if endpoint is stalled or stall is pending */
>>>>   		cdns3_select_ep(priv_dev, ctrl->wIndex);
>>>> -		if (EP_STS_STALL(readl(&priv_dev->regs->ep_sts)))
>>>> +		if (EP_STS_STALL(readl(&priv_dev->regs->ep_sts)) ||
>>>> +		    (priv_ep->flags & EP_STALL_PENDING))
>>>>   			usb_status =  BIT(USB_ENDPOINT_HALT);
>>>>   		break;
>>>>   	default:
>>>> --
>>>> 2.17.1
>>>>
>>>
>>> --
>>>
>>> Thanks,
>>> Peter Chen
>>
>> Regards,
>> Pawel

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki