linux-kernel - [PATCH v3] rtc: Fix the AltCentury value on AMD/Hygon platform

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-ID: <20191008113616.103734-1-fanjinke@hygon.cn>
Date:   Tue, 8 Oct 2019 19:36:16 +0800
From:   Jinke Fan <fanjinke@...on.cn>
To:     <a.zummo@...ertech.it>, <alexandre.belloni@...tlin.com>,
        <puwen@...on.cn>, <thomas.lendacky@....com>, <kim.phillips@....com>
CC:     <linux-rtc@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        Jinke Fan <fanjinke@...on.cn>
Subject: [PATCH v3] rtc: Fix the AltCentury value on AMD/Hygon platform

When using following operations:
date -s "21190910 19:20:00"
hwclock -w
to change date from 2019 to 2119 for test, it will fail on Hygon
Dhyana and AMD Zen CPUs, while the same operations run ok on Intel i7
platform.

MC146818 driver use function mc146818_set_time() to set register
RTC_FREQ_SELECT(RTC_REG_A)'s bit4-bit6 field which means divider stage
reset value on Intel platform to 0x7.

While AMD/Hygon RTC_REG_A(0Ah)'s bit4 is defined as DV0 [Reference]:
DV0 = 0 selects Bank 0, DV0 = 1 selects Bank 1. Bit5-bit6 is defined
as reserved.

DV0 is set to 1, it will select Bank 1, which will disable AltCentury
register(0x32) access. As UEFI pass acpi_gbl_FADT.century 0x32
(AltCentury), the CMOS write will be failed on code:
CMOS_WRITE(century, acpi_gbl_FADT.century).

Correct RTC_REG_A bank select bit(DV0) to 0 on AMD/Hygon CPUs, it will
enable AltCentury(0x32) register writing and finally setup century as
expected.

Test results on AMD/Hygon machine show that it works as expected.

Reference:
https://www.amd.com/system/files/TechDocs/51192_Bolton_FCH_RRG.pdf
section: 3.13 Real Time Clock (RTC)

Reported-by: kbuild test robot <lkp@...el.com>
Signed-off-by: Jinke Fan <fanjinke@...on.cn>
---

v2->v3:
  - Make the changes only relevant to AMD/Hygon.

v1->v2:
  - Fix the compile errors on sparc64/alpha platform.

 drivers/rtc/rtc-mc146818-lib.c | 11 ++++++++++-
 include/linux/mc146818rtc.h    |  6 ++++++
 2 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-mc146818-lib.c b/drivers/rtc/rtc-mc146818-lib.c
index 2ecd8752b088..70502881785d 100644
--- a/drivers/rtc/rtc-mc146818-lib.c
+++ b/drivers/rtc/rtc-mc146818-lib.c
@@ -172,7 +172,16 @@ int mc146818_set_time(struct rtc_time *time)
 	save_control = CMOS_READ(RTC_CONTROL);
 	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
 	save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
-	CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
+
+#ifdef CONFIG_X86
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD ||
+	    boot_cpu_data.x86_vendor == X86_VENDOR_HYGON)
+		CMOS_WRITE((save_freq_select & (~RTC_DV0)), RTC_FREQ_SELECT);
+	else
+		CMOS_WRITE((save_freq_select | RTC_DIV_RESET2), RTC_FREQ_SELECT);
+#else
+	CMOS_WRITE((save_freq_select | RTC_DIV_RESET2), RTC_FREQ_SELECT);
+#endif
 
 #ifdef CONFIG_MACH_DECSTATION
 	CMOS_WRITE(real_yrs, RTC_DEC_YEAR);
diff --git a/include/linux/mc146818rtc.h b/include/linux/mc146818rtc.h
index 0661af17a758..7066a7bced61 100644
--- a/include/linux/mc146818rtc.h
+++ b/include/linux/mc146818rtc.h
@@ -86,6 +86,12 @@ struct cmos_rtc_board_info {
    /* 2 values for divider stage reset, others for "testing purposes only" */
 #  define RTC_DIV_RESET1	0x60
 #  define RTC_DIV_RESET2	0x70
+
+#ifdef CONFIG_X86
+   /* DV0 = 0 selects Bank 0, DV0 = 1 selects Bank 1 on AMD/Hygon platform */
+#  define RTC_DV0		0x10
+#endif
+
   /* Periodic intr. / Square wave rate select. 0=none, 1=32.8kHz,... 15=2Hz */
 # define RTC_RATE_SELECT 	0x0F
 
-- 
2.17.1