| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20191008132043.7966-2-daniel.thompson@linaro.org>
Date: Tue, 8 Oct 2019 14:20:39 +0100
From: Daniel Thompson <daniel.thompson@...aro.org>
To: Jason Wessel <jason.wessel@...driver.com>,
Douglas Anderson <dianders@...omium.org>
Cc: Daniel Thompson <daniel.thompson@...aro.org>,
kgdb-bugreport@...ts.sourceforge.net, linux-kernel@...r.kernel.org,
patches@...aro.org
Subject: [PATCH v2 1/5] kdb: Tidy up code to handle escape sequences
kdb_read_get_key() has extremely complex break/continue control flow
managed by state variables and is very hard to review or modify. In
particular the way the escape sequence handling interacts with the
general control flow is hard to follow. Separate out the escape key
handling, without changing the control flow. This makes the main body of
the code easier to review.
Signed-off-by: Daniel Thompson <daniel.thompson@...aro.org>
---
kernel/debug/kdb/kdb_io.c | 127 ++++++++++++++++++++------------------
1 file changed, 66 insertions(+), 61 deletions(-)
diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c
index 3a5184eb6977..68e2c29f14f5 100644
--- a/kernel/debug/kdb/kdb_io.c
+++ b/kernel/debug/kdb/kdb_io.c
@@ -49,6 +49,63 @@ static int kgdb_transition_check(char *buffer)
return 0;
}
+/*
+ * kdb_read_handle_escape
+ *
+ * Run a validity check on an accumulated escape sequence.
+ *
+ * Returns -1 if the escape sequence is unwanted, 0 if it is incomplete,
+ * otherwise it returns a mapped key value to pass to the upper layers.
+ */
+static int kdb_read_handle_escape(char *buf, size_t sz)
+{
+ char *lastkey = buf + sz - 1;
+
+ switch (sz) {
+ case 1:
+ if (*lastkey == '\e')
+ return 0;
+ break;
+
+ case 2: /* \e<something> */
+ if (*lastkey == '[')
+ return 0;
+ break;
+
+ case 3:
+ switch (*lastkey) {
+ case 'A': /* \e[A, up arrow */
+ return 16;
+ case 'B': /* \e[B, down arrow */
+ return 14;
+ case 'C': /* \e[C, right arrow */
+ return 6;
+ case 'D': /* \e[D, left arrow */
+ return 2;
+ case '1': /* \e[<1,3,4>], may be home, del, end */
+ case '3':
+ case '4':
+ return 0;
+ }
+ break;
+
+ case 4:
+ if (*lastkey == '~') {
+ switch (buf[2]) {
+ case '1': /* \e[1~, home */
+ return 1;
+ case '3': /* \e[3~, del */
+ return 4;
+ case '4': /* \e[4~, end */
+ return 5;
+ }
+ }
+ break;
+ }
+
+ return -1;
+}
+
static int kdb_read_get_key(char *buffer, size_t bufsize)
{
#define ESCAPE_UDELAY 1000
@@ -102,68 +159,16 @@ static int kdb_read_get_key(char *buffer, size_t bufsize)
escape_delay = 2;
continue;
}
- if (ped - escape_data == 1) {
- /* \e */
- continue;
- } else if (ped - escape_data == 2) {
- /* \e<something> */
- if (key != '[')
- escape_delay = 2;
- continue;
- } else if (ped - escape_data == 3) {
- /* \e[<something> */
- int mapkey = 0;
- switch (key) {
- case 'A': /* \e[A, up arrow */
- mapkey = 16;
- break;
- case 'B': /* \e[B, down arrow */
- mapkey = 14;
- break;
- case 'C': /* \e[C, right arrow */
- mapkey = 6;
- break;
- case 'D': /* \e[D, left arrow */
- mapkey = 2;
- break;
- case '1': /* dropthrough */
- case '3': /* dropthrough */
- /* \e[<1,3,4>], may be home, del, end */
- case '4':
- mapkey = -1;
- break;
- }
- if (mapkey != -1) {
- if (mapkey > 0) {
- escape_data[0] = mapkey;
- escape_data[1] = '\0';
- }
- escape_delay = 2;
- }
- continue;
- } else if (ped - escape_data == 4) {
- /* \e[<1,3,4><something> */
- int mapkey = 0;
- if (key == '~') {
- switch (escape_data[2]) {
- case '1': /* \e[1~, home */
- mapkey = 1;
- break;
- case '3': /* \e[3~, del */
- mapkey = 4;
- break;
- case '4': /* \e[4~, end */
- mapkey = 5;
- break;
- }
- }
- if (mapkey > 0) {
- escape_data[0] = mapkey;
- escape_data[1] = '\0';
- }
- escape_delay = 2;
- continue;
+
+ key = kdb_read_handle_escape(escape_data,
+ ped - escape_data);
+ if (key > 0) {
+ escape_data[0] = key;
+ escape_data[1] = '\0';
}
+ if (key)
+ escape_delay = 2;
+ continue;
}
break; /* A key to process */
}
--
2.21.0
Powered by blists - more mailing lists