Message-ID: <acef4f1e-0b59-30f5-f31f-9fc22f393072@baylibre.com>
Date:   Tue, 8 Oct 2019 15:40:05 +0200
From:   Maxime Jourdan <mjourdan@...libre.com>
To:     Hans Verkuil <hverkuil@...all.nl>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        Hans Verkuil <hans.verkuil@...co.com>
Cc:     Kevin Hilman <khilman@...libre.com>,
        Jerome Brunet <jbrunet@...libre.com>,
        Neil Armstrong <narmstrong@...libre.com>,
        Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
        linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-amlogic@...ts.infradead.org
Subject: Re: [PATCH 0/2] media: meson: vdec: Add compliant H264 support

On 07/10/2019 18:39, Hans Verkuil wrote:
> On 10/7/19 6:24 PM, Maxime Jourdan wrote:
>> On 07/10/2019 17:12, Hans Verkuil wrote:
>>> On 10/7/19 4:59 PM, Maxime Jourdan wrote:
>>>> Hello,
>>>>
>>>> This patch series aims to bring H.264 support as well as compliance update
>>>> to the amlogic stateful video decoder driver.
>>>>
>>>> There is 1 issue that remains currently:
>>>>
>>>>    - The following codepath had to be commented out from v4l2-compliance as
>>>> it led to stalling:
>>>>
>>>> if (node->codec_mask & STATEFUL_DECODER) {
>>>>      struct v4l2_decoder_cmd cmd;
>>>>      buffer buf_cap(m2m_q);
>>>>
>>>>      memset(&cmd, 0, sizeof(cmd));
>>>>      cmd.cmd = V4L2_DEC_CMD_STOP;
>>>>
>>>>      /* No buffers are queued, call STREAMON, then STOP */
>>>>      fail_on_test(node->streamon(q.g_type()));
>>>>      fail_on_test(node->streamon(m2m_q.g_type()));
>>>>      fail_on_test(doioctl(node, VIDIOC_DECODER_CMD, &cmd));
>>>>
>>>>      fail_on_test(buf_cap.querybuf(node, 0));
>>>>      fail_on_test(buf_cap.qbuf(node));
>>>>      fail_on_test(buf_cap.dqbuf(node));
>>>>      fail_on_test(!(buf_cap.g_flags() & V4L2_BUF_FLAG_LAST));
>>>>      for (unsigned p = 0; p < buf_cap.g_num_planes(); p++)
>>>>          fail_on_test(buf_cap.g_bytesused(p));
>>>>      fail_on_test(node->streamoff(q.g_type()));
>>>>      fail_on_test(node->streamoff(m2m_q.g_type()));
>>>>
>>>>      /* Call STREAMON, queue one CAPTURE buffer, then STOP */
>>>>      fail_on_test(node->streamon(q.g_type()));
>>>>      fail_on_test(node->streamon(m2m_q.g_type()));
>>>>      fail_on_test(buf_cap.querybuf(node, 0));
>>>>      fail_on_test(buf_cap.qbuf(node));
>>>>      fail_on_test(doioctl(node, VIDIOC_DECODER_CMD, &cmd));
>>>>
>>>>      fail_on_test(buf_cap.dqbuf(node));
>>>>      fail_on_test(!(buf_cap.g_flags() & V4L2_BUF_FLAG_LAST));
>>>>      for (unsigned p = 0; p < buf_cap.g_num_planes(); p++)
>>>>          fail_on_test(buf_cap.g_bytesused(p));
>>>>      fail_on_test(node->streamoff(q.g_type()));
>>>>      fail_on_test(node->streamoff(m2m_q.g_type()));
>>>> }
>>>>
>>>> The reason for this is because the driver has a limitation where all
>>>> capturebuffers must be queued to the driver before STREAMON is effective.
>>>> The firmware needs to know in advance what all the buffers are before
>>>> starting to decode.
>>>> This limitation is enforced via q->min_buffers_needed.
>>>> As such, in this compliance codepath, STREAMON is never actually called
>>>> driver-side and there is a stall on fail_on_test(buf_cap.dqbuf(node));
>>>
>>> That's interesting. I will have to look more closely at this.
>>>
>>>>
>>>>
>>>> One last detail: V4L2_FMT_FLAG_DYN_RESOLUTION is currently not recognized
>>>> by v4l2-compliance, so it was left out for the test. However, it is
>>>> present in the patch series.
>>>
>>> It is definitely recognized by v4l2-compliance.
>>>
>>>>
>>>> The second patch has 3 "Alignment should match open parenthesis" lines
>>>> where I preferred to keep them that way.
>>>>
>>>> Thanks Stanimir for sharing your HDR file creation tools, this was very
>>>> helpful :).
>>>>
>>>> Maxime
>>>>
>>>> # v4l2-compliance --stream-from-hdr test-25fps.h264.hdr -s250
>>>> v4l2-compliance SHA: a162244d47d4bb01d0692da879dce5a070f118e7, 64 bits
>>>
>>> But this SHA isn't in the v4l-utils repo, so this makes me wonder where you
>>> got this repo from.
>>>
>>
>> I am based off the hverkuil/vicodec branch. The SHA I am on is actually 05387265053bc6f9 ("test-media: add vicodec tests"), but it wasn't updated as I found out it requires a new bootstrap to refresh
>> the SHA. Maybe some rebasing at some point got rid of a162244d.
> 
> Don't use the hverkuil/vicodec branch. Everything there has been merged into the
> regular v4l-utils repo some time ago. So just clone git://linuxtv.org/v4l-utils.git
> and use that.
> 

Here is v4l2-compliance master without removing the flag from the driver 
this time. I however had to keep the codepath mentionned earlier commented.

# v4l2-compliance --stream-from-hdr test-25fps.h264.hdr -s250
v4l2-compliance SHA: fd74ecee9020fcf80b3b9628f277d9311b443395, 64 bits

Compliance test for meson-vdec device /dev/video0:

Driver Info:
	Driver name      : meson-vdec
	Card type        : Amlogic Video Decoder
	Bus info         : platform:meson-vdec
	Driver version   : 5.4.0
	Capabilities     : 0x84204000
		Video Memory-to-Memory Multiplanar
		Streaming
		Extended Pix Format
		Device Capabilities
	Device Caps      : 0x04204000
		Video Memory-to-Memory Multiplanar
		Streaming
		Extended Pix Format
	Detected Stateful Decoder

Required ioctls:
	test VIDIOC_QUERYCAP: OK

Allow for multiple opens:
	test second /dev/video0 open: OK
	test VIDIOC_QUERYCAP: OK
	test VIDIOC_G/S_PRIORITY: OK
	test for unlimited opens: OK

Debug ioctls:
	test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
	test VIDIOC_LOG_STATUS: OK (Not Supported)

Input ioctls:
	test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
	test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
	test VIDIOC_ENUMAUDIO: OK (Not Supported)
	test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDIO: OK (Not Supported)
	Inputs: 0 Audio Inputs: 0 Tuners: 0

Output ioctls:
	test VIDIOC_G/S_MODULATOR: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
	test VIDIOC_ENUMAUDOUT: OK (Not Supported)
	test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDOUT: OK (Not Supported)
	Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
	test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
	test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
	test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
	test VIDIOC_G/S_EDID: OK (Not Supported)

Control ioctls:
	test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
	test VIDIOC_QUERYCTRL: OK
	test VIDIOC_G/S_CTRL: OK
	test VIDIOC_G/S/TRY_EXT_CTRLS: OK
	test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
	test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
	Standard Controls: 2 Private Controls: 0

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	test VIDIOC_G/S_PARM: OK (Not Supported)
	test VIDIOC_G_FBUF: OK (Not Supported)
	test VIDIOC_G_FMT: OK
	test VIDIOC_TRY_FMT: OK
	test VIDIOC_S_FMT: OK
	test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
	test Cropping: OK (Not Supported)
	test Composing: OK (Not Supported)
	test Scaling: OK

Codec ioctls:
	test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
	test VIDIOC_G_ENC_INDEX: OK (Not Supported)
	test VIDIOC_(TRY_)DECODER_CMD: OK

Buffer ioctls:
	test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
	test VIDIOC_EXPBUF: OK
	test Requests: OK (Not Supported)

Test input 0:

Streaming ioctls:
	test read/write: OK (Not Supported)
	test blocking wait: OK
	Video Capture Multiplanar: Captured 250 buffers
	test MMAP (select): OK
	Video Capture Multiplanar: Captured 250 buffers
	test MMAP (epoll): OK
	test USERPTR (select): OK (Not Supported)
	test DMABUF: Cannot test, specify --expbuf-device

Total for meson-vdec device /dev/video0: 49, Succeeded: 49, Failed: 0, 
Warnings: 0

Maxime

 >
> Regards,
> 
> 	Hans
> 

Powered by blists - more mailing lists