[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1570604659-28314-1-git-send-email-Anson.Huang@nxp.com>
Date: Wed, 9 Oct 2019 15:04:19 +0800
From: Anson Huang <Anson.Huang@....com>
To: robh+dt@...nel.org, mark.rutland@....com, shawnguo@...nel.org,
s.hauer@...gutronix.de, kernel@...gutronix.de, festevam@...il.com,
l.stach@...gutronix.de, ccaione@...libre.com,
daniel.baluta@....com, andrew.smirnov@...il.com, abel.vesa@....com,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Cc: Linux-imx@....com
Subject: [PATCH] arm64: dts: imx8mq-evk: VDD_ARM power rail is always ON
On i.MX8MQ EVK board, VDD_ARM is from a DC-DC converter which
is always ON, the GPIO1_IO13 is ONLY to switch VDD_ARM's voltage
between 0.9V and 1V for CPU DVFS, so VDD_ARM's GPIO regulator
should be always ON to avoid below confusion after kernel boot
up:
imx8mqevk login:
[ 31.776619] vdd_arm: disabling
Signed-off-by: Anson Huang <Anson.Huang@....com>
---
arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 6ede46f..4e0a281 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -48,6 +48,8 @@
gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
states = <1000000 0x0
900000 0x1>;
+ regulator-boot-on;
+ regulator-always-on;
};
wm8524: audio-codec {
--
2.7.4
Powered by blists - more mailing lists