linux-kernel - Re: [PATCH v3 02/14] soc: ti: k3: add navss ringacc driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 9 Oct 2019 10:14:24 +0300
From:   Tero Kristo <t-kristo@...com>
To:     Peter Ujfalusi <peter.ujfalusi@...com>, <vkoul@...nel.org>,
        <robh+dt@...nel.org>, <nm@...com>, <ssantosh@...nel.org>
CC:     <dan.j.williams@...el.com>, <dmaengine@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <grygorii.strashko@...com>, <lokeshvutla@...com>,
        <tony@...mide.com>, <j-keerthy@...com>
Subject: Re: [PATCH v3 02/14] soc: ti: k3: add navss ringacc driver

On 01/10/2019 09:16, Peter Ujfalusi wrote:
> From: Grygorii Strashko <grygorii.strashko@...com>
> 
> The Ring Accelerator (RINGACC or RA) provides hardware acceleration to
> enable straightforward passing of work between a producer and a consumer.
> There is one RINGACC module per NAVSS on TI AM65x SoCs.
> 
> The RINGACC converts constant-address read and write accesses to equivalent
> read or write accesses to a circular data structure in memory. The RINGACC
> eliminates the need for each DMA controller which needs to access ring
> elements from having to know the current state of the ring (base address,
> current offset). The DMA controller performs a read or write access to a
> specific address range (which maps to the source interface on the RINGACC)
> and the RINGACC replaces the address for the transaction with a new address
> which corresponds to the head or tail element of the ring (head for reads,
> tail for writes). Since the RINGACC maintains the state, multiple DMA
> controllers or channels are allowed to coherently share the same rings as
> applicable. The RINGACC is able to place data which is destined towards
> software into cached memory directly.
> 
> Supported ring modes:
> - Ring Mode
> - Messaging Mode
> - Credentials Mode
> - Queue Manager Mode
> 
> TI-SCI integration:
> 
> Texas Instrument's System Control Interface (TI-SCI) Message Protocol now
> has control over Ringacc module resources management (RM) and Rings
> configuration.
> 
> The corresponding support of TI-SCI Ringacc module RM protocol
> introduced as option through DT parameters:
> - ti,sci: phandle on TI-SCI firmware controller DT node
> - ti,sci-dev-id: TI-SCI device identifier as per TI-SCI firmware spec
> 
> if both parameters present - Ringacc driver will configure/free/reset Rings
> using TI-SCI Message Ringacc RM Protocol.
> 
> The Ringacc driver manages Rings allocation by itself now and requests
> TI-SCI firmware to allocate and configure specific Rings only. It's done
> this way because, Linux driver implements two stage Rings allocation and
> configuration (allocate ring and configure ring) while I-SCI Message

You missed fixing the typo above: I-SCI to TI-SCI. However, it is just 
cosmetic so I don't mind.

Reviewed-by: Tero Kristo <t-kristo@...com>
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki