[<prev] [next>] [day] [month] [year] [list]
Message-ID: <20191009073129.5439-1-biao.huang@mediatek.com>
Date: Wed, 9 Oct 2019 15:31:29 +0800
From: Biao Huang <biao.huang@...iatek.com>
To: <davem@...emloft.net>, Jose Abreu <joabreu@...opsys.com>,
<andrew@...n.ch>
CC: Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Matthias Brugger <matthias.bgg@...il.com>,
<netdev@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
<linux-mediatek@...ts.infradead.org>, <yt.shen@...iatek.com>,
<biao.huang@...iatek.com>, <jianguo.zhang@...iatek.com>,
<boon.leong.ong@...el.com>
Subject: [PATCH] net: stmmac: dwmac-mediatek: fix wrong delay value issue when resume back
mac_delay value will be divided by 550/170 in mt2712_delay_stage2ps(),
which is invoked at the beginning of mt2712_set_delay(), and the value
should be restored at the end of mt2712_set_delay().
Or, mac_delay will be divided again when invoking mt2712_set_delay()
when resume back.
So, add mt2712_delay_ps2stage() to mt2712_set_delay() to recovery the
original mac_delay value.
Signed-off-by: Biao Huang <biao.huang@...iatek.com>
---
.../ethernet/stmicro/stmmac/dwmac-mediatek.c | 27 +++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
index 79f2ee37afed..cea7a0c7ce68 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
@@ -130,6 +130,31 @@ static void mt2712_delay_ps2stage(struct mediatek_dwmac_plat_data *plat)
}
}
+static void mt2712_delay_stage2ps(struct mediatek_dwmac_plat_data *plat)
+{
+ struct mac_delay_struct *mac_delay = &plat->mac_delay;
+
+ switch (plat->phy_mode) {
+ case PHY_INTERFACE_MODE_MII:
+ case PHY_INTERFACE_MODE_RMII:
+ /* 550ps per stage for MII/RMII */
+ mac_delay->tx_delay *= 550;
+ mac_delay->rx_delay *= 550;
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ /* 170ps per stage for RGMII */
+ mac_delay->tx_delay *= 170;
+ mac_delay->rx_delay *= 170;
+ break;
+ default:
+ dev_err(plat->dev, "phy interface not supported\n");
+ break;
+ }
+}
+
static int mt2712_set_delay(struct mediatek_dwmac_plat_data *plat)
{
struct mac_delay_struct *mac_delay = &plat->mac_delay;
@@ -199,6 +224,8 @@ static int mt2712_set_delay(struct mediatek_dwmac_plat_data *plat)
regmap_write(plat->peri_regmap, PERI_ETH_DLY, delay_val);
regmap_write(plat->peri_regmap, PERI_ETH_DLY_FINE, fine_val);
+ mt2712_delay_stage2ps(plat);
+
return 0;
}
--
2.18.0
Powered by blists - more mailing lists