linux-kernel - Re: [PATCH v8] rtl8xxxu: Improve TX performance of RTL8723BU on rtl8xxxu driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-Id: <20191009082043.150BC602F2@smtp.codeaurora.org>
Date:   Wed,  9 Oct 2019 08:20:42 +0000 (UTC)
From:   Kalle Valo <kvalo@...eaurora.org>
To:     Chris Chiu <chiu@...lessm.com>
Cc:     Jes.Sorensen@...il.com, davem@...emloft.net,
        linux-wireless@...r.kernel.org, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux@...lessm.com,
        Daniel Drake <drake@...lessm.com>
Subject: Re: [PATCH v8] rtl8xxxu: Improve TX performance of RTL8723BU on
 rtl8xxxu driver

Chris Chiu <chiu@...lessm.com> wrote:

> We have 3 laptops which connect the wifi by the same RTL8723BU.
> The PCI VID/PID of the wifi chip is 10EC:B720 which is supported.
> They have the same problem with the in-kernel rtl8xxxu driver, the
> iperf (as a client to an ethernet-connected server) gets ~1Mbps.
> Nevertheless, the signal strength is reported as around -40dBm,
> which is quite good. From the wireshark capture, the tx rate for each
> data and qos data packet is only 1Mbps. Compare to the Realtek driver
> at https://github.com/lwfinger/rtl8723bu, the same iperf test gets
> ~12Mbps or better. The signal strength is reported similarly around
> -40dBm. That's why we want to improve.
> 
> After reading the source code of the rtl8xxxu driver and Realtek's, the
> major difference is that Realtek's driver has a watchdog which will keep
> monitoring the signal quality and updating the rate mask just like the
> rtl8xxxu_gen2_update_rate_mask() does if signal quality changes.
> And this kind of watchdog also exists in rtlwifi driver of some specific
> chips, ex rtl8192ee, rtl8188ee, rtl8723ae, rtl8821ae...etc. They have
> the same member function named dm_watchdog and will invoke the
> corresponding dm_refresh_rate_adaptive_mask to adjust the tx rate
> mask.
> 
> With this commit, the tx rate of each data and qos data packet will
> be 39Mbps (MCS4) with the 0xF00000 as the tx rate mask. The 20th bit
> to 23th bit means MCS4 to MCS7. It means that the firmware still picks
> the lowest rate from the rate mask and explains why the tx rate of
> data and qos data is always lowest 1Mbps because the default rate mask
> passed is always 0xFFFFFFF ranges from the basic CCK rate, OFDM rate,
> and MCS rate. However, with Realtek's driver, the tx rate observed from
> wireshark under the same condition is almost 65Mbps or 72Mbps, which
> indicating that rtl8xxxu could still be further improved.
> 
> Signed-off-by: Chris Chiu <chiu@...lessm.com>
> Reviewed-by: Daniel Drake <drake@...lessm.com>
> Acked-by: Jes Sorensen <Jes.Sorensen@...il.com>

Patch applied to wireless-drivers-next.git, thanks.

a9bb0b515778 rtl8xxxu: Improve TX performance of RTL8723BU on rtl8xxxu driver

-- 
https://patchwork.kernel.org/patch/11170977/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches