linux-kernel - Re: [PATCH v3 08/14] dmaengine: ti: New driver for K3 UDMA

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <8bd7db20-811d-b7c7-38ec-75f1c9d94b8f@ti.com>
Date:   Wed, 9 Oct 2019 16:40:59 +0300
From:   Tero Kristo <t-kristo@...com>
To:     Peter Ujfalusi <peter.ujfalusi@...com>, <vkoul@...nel.org>,
        <robh+dt@...nel.org>, <nm@...com>, <ssantosh@...nel.org>
CC:     <dan.j.williams@...el.com>, <dmaengine@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <grygorii.strashko@...com>, <lokeshvutla@...com>,
        <tony@...mide.com>, <j-keerthy@...com>
Subject: Re: [PATCH v3 08/14] dmaengine: ti: New driver for K3 UDMA - split#1:
 defines, structs, io func

On 01/10/2019 09:16, Peter Ujfalusi wrote:
> Split patch for review containing: defines, structs, io and low level
> functions and interrupt callbacks.
> 
> DMA driver for
> Texas Instruments K3 NAVSS Unified DMA – Peripheral Root Complex (UDMA-P)
> 
> The UDMA-P is intended to perform similar (but significantly upgraded) functions
> as the packet-oriented DMA used on previous SoC devices. The UDMA-P module
> supports the transmission and reception of various packet types. The UDMA-P is
> architected to facilitate the segmentation and reassembly of SoC DMA data
> structure compliant packets to/from smaller data blocks that are natively
> compatible with the specific requirements of each connected peripheral. Multiple
> Tx and Rx channels are provided within the DMA which allow multiple segmentation
> or reassembly operations to be ongoing. The DMA controller maintains state
> information for each of the channels which allows packet segmentation and
> reassembly operations to be time division multiplexed between channels in order
> to share the underlying DMA hardware. An external DMA scheduler is used to
> control the ordering and rate at which this multiplexing occurs for Transmit
> operations. The ordering and rate of Receive operations is indirectly controlled
> by the order in which blocks are pushed into the DMA on the Rx PSI-L interface.
> 
> The UDMA-P also supports acting as both a UTC and UDMA-C for its internal
> channels. Channels in the UDMA-P can be configured to be either Packet-Based or
> Third-Party channels on a channel by channel basis.
> 
> The initial driver supports:
> - MEM_TO_MEM (TR mode)
> - DEV_TO_MEM (Packet / TR mode)
> - MEM_TO_DEV (Packet / TR mode)
> - Cyclic (Packet / TR mode)
> - Metadata for descriptors
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@...com>

Did review this to best of my ability but could not find anything 
obviously broken, thus:

Reviewed-by: Tero Kristo <t-kristo@...com>

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki